What Kind Of Oil Does A 2012 Honda Civic Use?

0W-20 5 Quart Mobil 1 Extended Performance Synthetic Motor Oil.

What kind of oil should I use for my 2012 Honda Civic?

You’re going to use 3.9 quarts of SAE 0W-20 when you fill up. Don’t rely on our word alone, though. Consult your owner’s handbook again. You want to be certain because there can be changes based on your trim level and other selections.

This solution raises a few additional queries, such as what exactly does “SAE mean,” what the W stands for, and is it beneficial to replace your oil before the recommended time? All of this will be covered here. Read on.

How much oil does a Honda Civic require?

You need synthetic 0W-20 grade oil for your Honda Civic. The lower viscosity that synthetic oil can achieve is what the Honda engine requires to operate. Both conventional oil and mixed synthetic chemicals are not intended for use in your car.

Is synthetic oil required for Honda Civics?

  • How Frequently You Drive Your Civic: If you don’t drive your Civic very often, synthetic oil will benefit you because traditional oil has a tendency to degrade quickly, even when not being used, whereas synthetic oil will last over time.
  • Your engine’s age and condition: Synthetic oil contains uniform molecules, which makes it more likely to pass through engine rings and cylinder walls. You should continue using conventional oil if your engine is already prone to leaks and/or excessive oil usage. Why spend more money on synthetic oil if it would merely leak out more quickly?
  • Where You Live: Because synthetic oil is considerably more adaptable than conventional oil in extremely cold and thin air, it works best if you live in a hot, cold, or high altitude climate.
  • How You Drive Your Civic: Even in stop-and-go traffic, do you frequently idling your Civic? Don’t be natural. It’s because air flow is necessary for your engine to stay cool. Synthetic oil, as opposed to regular oil, might aid in keeping your engine cool while it is idle. If you utilize your Civic for activities other than commuting, like racing, synthetic oil is a wonderful alternative because it provides greater protection.

What is the purpose of 0W-20 oil?

The most popular and widely used motor oil grades have evolved over time to match the engines that automakers have utilized. In the 1960s, it was typical for a vehicle to need a monograde oil, with the viscosity or grade needed varying with the season. Multi-grade oils have taken the place of the requirement to switch grades according to the seasons or weather as motor oil chemistry has improved.

The size and power output of engines have varied substantially as vehicle engine technology has advanced. In order to protect the engine, it was typical in the 1970s to have an extremely huge engine (6-cylinder and 8-cylinder engines were the most popular). 20W-50 and 10W-40 were the most often used grades at the time. Smaller engines required lower viscosity motor oils as fuel efficiency became more important, which over time led to a growth in demand for the 10W-30, 5W-30, and 5W-20 grades.

Modern engines are developing more quickly than ever. Engines are being designed by automakers to be lighter and smaller while producing more power than ever. Thinner lubricants with improved engine protection and cleaning capabilities are required to safeguard these smaller, more powerful engines. This has caused 0W-20 to be the motor oil grade with the quickest rate of growth.

Can I substitute 5W20 for 0W20?

One of the low-temperature grades added to the SAE J300 EOVC system after 1952 is 0W20 motor oil (0W20 oil). It is a liquid designed to behave as an SAE 20 once the engine reaches its operating temperature but flow as easily as an SAE 0 in subzero conditions.

Even at -35C/-31F, this type of oil will still start to flow through the engine’s oil channels. This oil lubricates important engine components, making it simpler for you to start your engine cold in the winter.

W20 vs 5W20 Fuel Economy

Another low-temperature grade often advised for winter use is 5W20 motor oil, with 10W-30 serving as an option for higher temperatures. Because it offers the best fuel economy, reduces fuel consumption, and produces fewer exhaust pollutants, this oil type is widely used. Motor companies and governments all around the world, led by those in Japan, Europe, and the US, are looking for 5W20.

Low viscosity, high-quality synthetic grades 0W20 and 5W20 can both significantly improve fuel economy. When employed in fair-weather temperatures, their attributes are identical. When utilized in cold temperatures, there is little to no difference between the two variants.

How often should an oil change be performed on a 2012 Honda Civic?

Honda advises changing the oil and filter in your 2012 Honda Civic every 3,000 to 5,000 miles, but it’s important to consult your owner’s handbook and your dealer to determine the intervals that are most effective for your car.

Which motor oil is recommended for Honda?

Honda Genuine Motor Oil is made especially for your car because it satisfies American Honda’s strict engineering requirements. These requirements are on par with or better than many traditional fluids’ normal industry performance specifications. Honda Genuine Motor Oil, tried and true by American Honda’s Research & Development team, aids in keeping your Honda in line with its factory specifications.

Honda Genuine Motor Oil, offered and accessible at Honda dealers, is advised by American Honda. If conventional motor oil of a premium grade or an ultimate full synthetic mix is used instead of Honda Genuine Motor Oil, it must have the necessary viscosity grade listed in your Owner’s Manual. Additionally, the oil must be marked with an API Certification Seal, which certifies that it complies with the most recent API requirements and that it is energy-efficient. Oil additives are not necessary and are not advised; using them could have a negative impact on the durability and performance of your car’s engine.

For a list of fluids recommended by the manufacturer, please refer to your owner’s manual’s Recommended Engine Oil.

Is 0W-20 oil for Honda synthetic?

For the best possible engine protection in Honda and Acura cars, Honda Genuine Synthetic Blend Motor Oils are premium quality, all-season synthetic blend engine oils. They transcend the standards set by Honda and Acura to further prevent damaging engine deposits and increase fuel efficiency. Honda R&D tests and certifies its motor oils.

Honda Genuine Synthetic Blend Motor Oil is designed to withstand viscosity and thermal breakdown even under extreme service conditions, to offer exceptional wear protection, and to reduce the production of sludge and varnish. It also has strong foam resistance and safeguards against rust and bearing corrosion. In comparison to conventional engine oils, the part-synthetic formulation offers improved oxidation resistance, thermal stability at high temperatures, and better pumpability at low temperatures, providing additional protection under all driving circumstances.

The performance standards for gasoline engines set out by API SN and ILSAC GF-5 are exceeded by Honda Genuine Synthetic Blend Motor Oil. It is “Resource Conserving for better fuel efficiency and protection of catalysts in emissions control systems.

except for the RDX, Honda and Acura cars

Honda Genuine Synthetic Blend Motor Oil goes above and beyond:

  • GF-5 ILSAC
  • API Service SN that Saves Resources
  • Excellent thermal breakdown and viscosity resistance at high temperatures
  • exceeds ILSAC GF-5 requirements for new car warranties
  • Resource conservation to safeguard emissions systems and improve fuel efficiency
  • reduces wear to extend engine protection
  • designed specifically for Honda and Acura automobiles
  • prevents the buildup of sludge and varnish
  • Excellent pumpability at low temperatures
  • Low volatility for less reliance on oil

Which oil is ideal for Honda Civics?

Two different 1.5L inline-4 gasoline engines and a 2.0L hybrid with two electric motors are available for the new Honda Civic. The same brand of full-synthetic engine oil is used in all three engines.

The best alternative for the 0W-20 grade full synthetic engine oil for the 2021 and 2022 Honda Civic models is Honda Genuine Full Synthetic Oil. You will need 3.7 quarts of oil for the gasoline engine and 4.4 quarts for the hybrid, both of which cost $15 a quart.

Technically, since the 2021 and 2022 Civic is still under warranty, you shouldn’t even be changing the oil on your own. Nevertheless, at least you now know what the dealer uses, and you can keep using Honda full-synthetic oil once the warranty expires.

What Are the Benefits of Synthetic Oil?

It mostly depends on the model you purchase, how the engine was made, and what is advised in the owner’s manual whether your new Toyota utilizes synthetic or traditional oil. There are advantages and disadvantages to using each type of oil, but here are a few of the advantages of synthetic oil. Before using synthetic oil, make sure to verify with the Toyota service center in your area.

  • Enhanced Protection for Performance and Turbocharged Parts
  • Better Performance at Low Temperatures
  • Synthetic Oil Maintains Cleaner Engines
  • Enhanced Protection at Higher Temperatures
  • increased protection against engine wear

How Often Should You Change Synthetic Oil?

To guarantee best performance, standard oil change intervals are commonly set as 5,000 miles or 6 months. That period is increased to 10,000 miles or 12 months on Toyota cars that are required to use 0W-20 synthetic oil. Within that time frame, you should still periodically check and top off the oil level. For other models, synthetic oil is an option, and regardless of the type of oil you choose to use in those models, it is advised that you stick to the 5,000-mile/6-month intervals.