Vehicle oil SAE 5W-20. 4.5 gallons are available (with the filter) (4.3 liters). Note that the oil drain bolt needs to be torqued to 29 pound-feet (39 N-m).
In This Article...
What type of oil is used in a 2010 Honda?
2010 Honda Accord motor oil requirements are 4.2 to 4.5 quarts of SAE 5W-20. Honda’s producers claim that as long as the oil is changed as needed, both conventional and synthetic oils will function.
2011 and later Accord vehicles need synthetic oil, however your 2010 may use either. Here is a brief explanation of the distinction:
- has to be replaced every 3,000 miles or so.
- Because it runs more slowly than synthetic oils, it can provide older engines with additional protection.
- from crude oil, refined
- is more affordable, and
- is synthetic oil created to mimic conventional oil but with fewer contaminants.
- better guards against rust, corrosion, and buildup/sludge
- even when it is cold, flows fast and readily through your engine.
- should be replaced every 7,500 to 10,000 miles.
- increases the use of synthetic oils to better protect your engine.
- flows more slowly than fully synthetics yet burns cleaner than normal oil.
- use a standard oil base
Following a maintenance schedule and utilizing the specified components and fluids are no-brainers when it comes to protecting your car. Allow Jerry to locate the best auto insurance at the lowest cost for you as an additional means of defending your vehicle (and your wallet).
In under a minute, Jerry can provide you competitive quotes. Swapping is as simple. Jerry handles all the paperwork, makes all the contacts, and can even help you terminate your previous policy! Switching users save $887 year on average!
How much oil does a Honda Pilot require?
The Honda Pilot is made to last, just like other Honda vehicles, but you still need to use the right oil in it. Which oil is therefore the best for the Honda Pilot? Let’s look at what oil will assist your Pilot continue to operate at its peak level for years to come.
You should use top grade 0w-20 detergent or synthetic oil, per the Honda Pilot instructions. This oil is made to safeguard your engine and keep it operating smoothly in any weather.
The best option is genuine Honda motor oil, however customers can also choose another oil brand with the same viscosity.
If you want to keep your Honda Pilot operating like new for a long time, think about using the best oil you can. What makes one oil type for the Honda Pilot superior to others will be covered in this article. Continue reading for answers to more frequently asked questions regarding the Honda Pilot.
We hope the links provided are helpful to you before you continue reading. We may receive a commission if you buy something after clicking on one of the links on this page, so thank you!
Does Honda need fully synthetic motor oil?
Honda Genuine Motor Oil is made especially for your car because it satisfies American Honda’s strict engineering requirements. These requirements are on par with or better than many traditional fluids’ normal industry performance specifications. Honda Genuine Motor Oil, tried and true by American Honda’s Research & Development team, aids in keeping your Honda in line with its factory specifications.
Honda Genuine Motor Oil, offered and accessible at Honda dealers, is advised by American Honda. If conventional motor oil of a premium grade or an ultimate full synthetic mix is used instead of Honda Genuine Motor Oil, it must have the necessary viscosity grade listed in your Owner’s Manual. Additionally, the oil must be marked with an API Certification Seal, which certifies that it complies with the most recent API requirements and that it is energy-efficient. Oil additives are not necessary and are not advised; using them could have a negative impact on the durability and performance of your car’s engine.
For a list of fluids recommended by the manufacturer, please refer to your owner’s manual’s Recommended Engine Oil.
Can I use 5w30 for 5w20?
Yes. Using an oil with a greater viscosity, like 5w30, won’t cause short-term damage to your engine. To create uniform criteria for achieving realistic fuel efficiency and engine operating conditions, automakers collaborate closely with industry oil specialists like the SAE. These guidelines enable automakers to use particular oil grades and viscosities to achieve MPG and engine life objectives. The SAE claims that using low viscosity engine oil to increase fuel efficiency not only reduces frictional loss of the engine oil seal but also has no performance flaws.
Even though there are few practical differences between 5w30 and 5w20 in terms of fuel economy and engine wear, utilizing the recommended oil grade could void your powertrain warranty if the manufacturer. However, if your warranty is no longer valid, you can use any oil without any problems.
While using a thicker oil, such as 5w30, won’t cause your engine any short-term harm. It is advised that you, whenever feasible, abide by manufacturer recommendations.
Is 0W-20 equivalent to 5W20?
The ability of an oil to flow is measured by its viscosity. It also describes the thickness of the oil at various temperature levels.
When operating in freezing temperatures, 0W-20 motor oil performs like an SAE 0W weight oil. While 5W-20 oil functions as an SAE 5W weight oil.
The better the motor oil performs at low temperatures, according to SAE nomenclature, the lower the number before the ‘W’ is. Since 0W20 is much thinner than 5W-20, it is more stable at low temperatures and flows easily through the essential engine components.
A more suitable oil for a typical operating temperature range of -22F to 68F is 5W-20, which has a viscosity that is relatively thicker.
Can I substitute 0W-20 oil for 5w20 oil?
My car is intended to use 5W-20 motor oil, a reader writes. I unknowingly purchased 0W-20 and changed my oil without realizing it. Is it okay to keep using the 0W-20?
Our response: 0W-20 is typically a completely suitable replacement for 5W-20. Both goods are 20-weight motor oils when used in normal conditions. However, if the car is still covered by warranty, employing 0W-20 might not be appropriate in your situation (see more below).
Is 0W-20 oil for Honda synthetic?
For the best possible engine protection in Honda and Acura cars, Honda Genuine Synthetic Blend Motor Oils are premium quality, all-season synthetic blend engine oils. They transcend the standards set by Honda and Acura to further prevent damaging engine deposits and increase fuel efficiency. Honda R&D tests and certifies its motor oils.
Honda Genuine Synthetic Blend Motor Oil is designed to withstand viscosity and thermal breakdown even under extreme service conditions, to offer exceptional wear protection, and to reduce the production of sludge and varnish. It also has strong foam resistance and safeguards against rust and bearing corrosion. In comparison to conventional engine oils, the part-synthetic formulation offers improved oxidation resistance, thermal stability at high temperatures, and better pumpability at low temperatures, providing additional protection under all driving circumstances.
The performance standards for gasoline engines set out by API SN and ILSAC GF-5 are exceeded by Honda Genuine Synthetic Blend Motor Oil. It is “Resource Conserving for better fuel efficiency and protection of catalysts in emissions control systems.
except for the RDX, Honda and Acura cars
Honda Genuine Synthetic Blend Motor Oil goes above and beyond:
- API Service SN that Saves Resources
- GF-5 ILSAC
- Excellent thermal breakdown and viscosity resistance at high temperatures
- designed specifically for Honda and Acura automobiles
- exceeds ILSAC GF-5 requirements for new car warranties
- Resource conservation to safeguard emissions systems and improve fuel efficiency
- Low volatility for less reliance on oil
- reduces wear to extend engine protection
- Excellent pumpability at low temperatures
- prevents the buildup of sludge and varnish
What is engine oil 0W-20?
In colder temperatures, 0W-20 motor oil flows as freely as 0 Weight oil, but once the engine reaches operating temperature, it behaves more like 20 Weight oil. This guarantees that oil will begin to flow through the engine right away, lubricating important engine components even in cold weather.
The ‘W’ in viscosity descriptions does not, contrary to popular belief, stand for weight. In actuality, it represents Winter. This means that synthetic 0W-20 oil performs as a 0 Weight oil in cold areas but becomes as thick and viscous as a 20 Weight oil once the typical engine temperature has been attained.
Castrol EDGE, a cutting-edge full synthetic 0W-20 motor oil, is part of the company’s line of low viscosity 0W-20 lubricants. It is our toughest oil and is made to endure high temperatures and pressure. For those who want to push their car to the limit, it’s the perfect choice. Full synthetic 0W-20 motor oil liquid Castrol GTX MAGNATEC is designed with protective, clever ingredients that offer outstanding wear prevention.
Should I fill up my Honda CRV with synthetic oil?
Honda began using a 2.4-liter four-cylinder in 2007; the engine was unchanged even after the vehicle underwent a redesign in 2012. In that scenario, you should use a quality 5W40 synthetic or semi-synthetic oil from a reputable brand.
Why is the oil smoking in my 2011 Honda CRV?
Honda has discovered that certain four-cylinder Accord coupe and sedan models from 2008 to 2011 and the CR-V SUV models from 2010 to 2011 may start to experience higher than usual oil consumption if they have frequently been cranked forcefully with a cold engine utilizing subpar gas. These circumstances may result in carbon buildup on the piston rings, which over time may decrease the rings’ efficiency and permit oil to pass through.
Honda has increased the warranty on these engines to 8 years or 125,000 miles from the original purchase date in light of these findings. When you bring your car to a Honda dealership with these issues, the dealer shop will perform an oil consumption test by changing the oil, then plugging the fill port and drain hole. You will then continue to drive the vehicle until the low oil light illuminates once more before returning to the dealer to find out how much oil your vehicle used. If Honda discovers a problem, the cost of the consumption test is paid as part of the repair. You could have to pay for it if you don’t. Owners of the Accord and CR-V should refer to Honda Service Bulletin 12-087 and 12-088, respectively.
For common issues, refer to the technical service bulletins (TSBs) listed under the Reliability tab on the new and used car model pages.
Before providing repairs, the corporation may demand more testing and higher levels of permission if consumption is 1 quart every 1,000 to 3,000 miles. Honda will rebuild the engine to replace the piston rings if the consumption rate exceeds 1 quart every 1,000 miles and may replace the engine block if it is also damaged. Get your car fixed for nearly nothing.
In our overall vehicle reliability study, four-cylinder Accords and CR-Vs have consistently scored highly, and this low-incidence problem doesn’t affect that. In any case, we’re pleased to see that Honda is assisting customers who encounter this potentially expensive issue.
What is the proper way to oil a 2010 Honda Pilot?
How to Add Oil to a Honda Pilot Touring 3.5L V6 (2009-2015)
- Take off Oil Fill Cap – Remove the oil fill cap.
- Add Oil – Select the proper sort of oil and add it.
- Replace the oil fill cap by placing it back on the engine.
- Additional details about applying oil are available.
How much does a Honda Pilot oil change cost?
Honda Pilot Cost Estimate for Oil Change. Between $110 and $123, on average, it costs to change the oil in a Honda Pilot. While parts are priced between $72 and $75, labor is predicted to cost between $38 and $48. Taxes and other fees are not included in this range, nor are your particular model year or geographic area taken into account.