Advanced Full Synthetic Motor Oil, 5 Quart, Mobil 1 (Part No. 14991)
In This Article...
The amount of oil a 2010 Honda Odyssey uses
amazing cleaning ability! fantastic for direct injection and turbos. Up to 25,000 miles, 700 hours of use, or one year, whichever comes first, are covered under this warranty for your 2010 Honda. This oil lasts 15,000 miles even under harsh conditions (constant towing, hauling, idling, or dusty environment). Don’t forget to get our fantastic oil filter to keep junk out of your engine!
What type of oil is used in a 2010 Honda?
2010 Honda Accord motor oil requirements are 4.2 to 4.5 quarts of SAE 5W-20. Honda’s producers claim that as long as the oil is changed as needed, both conventional and synthetic oils will function.
2011 and later Accord vehicles need synthetic oil, however your 2010 may use either. Here is a brief explanation of the distinction:
- is more affordable, and
- has to be replaced every 3,000 miles or so.
- from crude oil, refined
- Because it runs more slowly than synthetic oils, it can provide older engines with additional protection.
- better guards against rust, corrosion, and buildup/sludge
- even when it is cold, flows fast and readily through your engine.
- is synthetic oil created to mimic conventional oil but with fewer contaminants.
- should be replaced every 7,500 to 10,000 miles.
- flows more slowly than fully synthetics yet burns cleaner than normal oil.
- increases the use of synthetic oils to better protect your engine.
- use a standard oil base
Following a maintenance schedule and utilizing the specified components and fluids are no-brainers when it comes to protecting your car. Allow Jerry to locate the best auto insurance at the lowest cost for you as an additional means of defending your vehicle (and your wallet).
In under a minute, Jerry can provide you competitive quotes. Swapping is as simple. Jerry handles all the paperwork, makes all the contacts, and can even help you terminate your previous policy! Switching users save $887 year on average!
Is 0W-20 equivalent to 5W20?
The ability of an oil to flow is measured by its viscosity. It also describes the thickness of the oil at various temperature levels.
When operating in freezing temperatures, 0W-20 motor oil performs like an SAE 0W weight oil. While 5W-20 oil functions as an SAE 5W weight oil.
The better the motor oil performs at low temperatures, according to SAE nomenclature, the lower the number before the ‘W’ is. Since 0W20 is much thinner than 5W-20, it is more stable at low temperatures and flows easily through the essential engine components.
A more suitable oil for a typical operating temperature range of -22F to 68F is 5W-20, which has a viscosity that is relatively thicker.
Is 5w30 a viable alternative to 5w20?
Yes. Using an oil with a greater viscosity, like 5w30, won’t cause short-term damage to your engine. To create uniform criteria for achieving realistic fuel efficiency and engine operating conditions, automakers collaborate closely with industry oil specialists like the SAE. These guidelines enable automakers to use particular oil grades and viscosities to achieve MPG and engine life objectives. The SAE claims that using low viscosity engine oil to increase fuel efficiency not only reduces frictional loss of the engine oil seal but also has no performance flaws.
Even though there are few practical differences between 5w30 and 5w20 in terms of fuel economy and engine wear, utilizing the recommended oil grade could void your powertrain warranty if the manufacturer. However, if your warranty is no longer valid, you can use any oil without any problems.
While using a thicker oil, such as 5w30, won’t cause your engine any short-term harm. It is advised that you, whenever feasible, abide by manufacturer recommendations.
Does Honda need fully synthetic motor oil?
Honda Genuine Motor Oil is made especially for your car because it satisfies American Honda’s strict engineering requirements. These requirements are on par with or better than many traditional fluids’ normal industry performance specifications. Honda Genuine Motor Oil, tried and true by American Honda’s Research & Development team, aids in keeping your Honda in line with its factory specifications.
Honda Genuine Motor Oil, offered and accessible at Honda dealers, is advised by American Honda. If conventional motor oil of a premium grade or an ultimate full synthetic mix is used instead of Honda Genuine Motor Oil, it must have the necessary viscosity grade listed in your Owner’s Manual. Additionally, the oil must be marked with an API Certification Seal, which certifies that it complies with the most recent API requirements and that it is energy-efficient. Oil additives are not necessary and are not advised; using them could have a negative impact on the durability and performance of your car’s engine.
For a list of fluids recommended by the manufacturer, please refer to your owner’s manual’s Recommended Engine Oil.
Which oil is ideal for a 2010 Honda Accord?
4.2 quarts of SAE 5W-20 engine oil are necessary for four-cylinder-equipped 2010 Honda Accord automobiles. 4.5 quarts of SAE 5W-20 oil are needed for models that have a six-cylinder engine.
A 2011 Honda Accord needs synthetic oil, right?
It’s a terrific way to save money and practice fine motor skills to learn how to change your own oil. Obtain the joke? However, the synthetic 0W-20 motor oil is the recommended oil type for the 2011 Honda Accord.
To ensure that your engine runs as smoothly and efficiently as possible for as long as possible, the finest oil you can give it is premium, 100% synthetic oil. You can use a variety of these oil brands in your Accord:
- Full synthetic Pennzoil Platinum 0W-20 motor oil
- Advanced Full Synthetic 0W-20 Motor Oil by Valvoline
- 0W-20 Full Synthetic Mobil 1 Advanced Fuel Economy Motor Oil
- 0W-20 Full Synthetic Motor Oil by Castrol
Changing your oil every 3,000 to 5,000 miles, or every three to five months, is a good rule of thumb. Consult your 2011 Honda Accord’s owners manual online to read about basic maintenance and operation advice. All you have to do is visit Honda’s website to view and print the manual and warranty details.
Changing your oil can be simple if you have the correct equipment and assistance. The same is true while looking for auto insurance. Simply download Jerry, the top-rated insurance app, to begin saving money on the greatest protection available!
Jerry is a certified broker and great software for shopping for insurance that compares rates from the best insurance providers. Simply choose from a choice of personalized quotations, and Jerry will complete all the necessary paperwork on your behalf. Additionally, the typical user saves more than $800 annually on auto insurance.
I’m using 5W20; when should I move to 5W30?
As you have probably already deduced, 5W20 performs better in cooler climates. 5W30 will be the best bet if you need engine oil for summertime performance. Only your own mechanic or the car’s manufacturer should advocate switching to this sort of oil, though.
By using an oil that your engine isn’t made for, you run the danger of damaging it. Keep in mind that 5W20 motor oil will flow through your engine more readily than 5W30.
If nothing else is specified, keep to 5W20 during winter. Use 5W30 in the summer if doing so won’t cause any problems for you.
What is engine oil 0W-20?
In colder temperatures, 0W-20 motor oil flows as freely as 0 Weight oil, but once the engine reaches operating temperature, it behaves more like 20 Weight oil. This guarantees that oil will begin to flow through the engine right away, lubricating important engine components even in cold weather.
The ‘W’ in viscosity descriptions does not, contrary to popular belief, stand for weight. In actuality, it represents Winter. This means that synthetic 0W-20 oil performs as a 0 Weight oil in cold areas but becomes as thick and viscous as a 20 Weight oil once the typical engine temperature has been attained.
Castrol EDGE, a cutting-edge full synthetic 0W-20 motor oil, is part of the company’s line of low viscosity 0W-20 lubricants. It is our toughest oil and is made to endure high temperatures and pressure. For those who want to push their car to the limit, it’s the perfect choice. Full synthetic 0W-20 motor oil liquid Castrol GTX MAGNATEC is designed with protective, clever ingredients that offer outstanding wear prevention.
Your Owner’s Manual
Although it’s really easy, owners manuals are frequently disregarded. To find out the appropriate viscosity of the motor oil you should use, always consult your owner’s handbook. Use the 0W20 and 5W20 variations interchangeably, depending on the weather, if they are both on the list.
Location
Given that both 0W20 and 5W20 motor oils operate in much the same temperature range, it is critical to think about where you will be using the car. The operating temperature range for synthetic oil is -40C to 20C for 0W-20 and -35C to 20C for 5W20 (5W20 synthetic oil). Being aware of these facts means two things:
- In places like Florida when the temperature is above 20C/68F, you cannot use either 0W20 or 5W20.
- If you reside in a region with extremely low temperatures, such as Alaska or Maine, it is preferable to use 0W20 oil.
Viscosity
The motor oil will flow more smoothly the lower the number is. At beginning temperatures, a 0W20 will be more fluid than a 5W20, but both will function similarly at normal engine operating temperatures. Keep in mind that engine oils naturally become thinner during heating and thicken while cooling.
Quality Testing
Any oil brand with the appropriate viscosity grade and the API donut symbol is acceptable. The oil has passed the testing required for SL service, as indicated by the starburst sign.
The API donut indicates that your motor oil passed the current SL service rating test after being tested by the American Petroleum Institute. ACEA (Association des Constructeurs Europeens d’Automobiles) is the counterpart of API in Europe.
Manufacturer Requirements
If your vehicle is substantially loaded, the machine designer would typically advise using an oil that has a high viscosity and is heavy like honey. However, if it moves quickly, a lubricant that can move out of the way and then move back in is preferable.
Fuel Economy
Despite the fact that both 5W20 and 0W20 (0W20 synthetic oil) can be used at 20C/68F, 0W20 is thinner than 5W20 at cold engine temperatures, particularly in the initial minutes after starting your automobile. Because it gives the car slightly higher fuel economy than the 5W20, new models specify it. The 0W20 model satisfies a turbo-diesel engine’s requirements as well.
Better oil to use: 0W20 or 5W-30?
Pay particular attention to the quality testing done while selecting a motor oil. Both the API donut and the starburst sign should be visible on the packaging.
The American Petroleum Institute’s testing was successful, as evidenced by the API donut. The starburst is also used to demonstrate eligibility for SL service.
Location
You must take the region into account while selecting the ideal oil viscosity from the suggested possibilities. For instance, 5W20 can be used in somewhat warmer settings while OW20 will perform better in cold climates like Maine or Alaska.
Having knowledge of the temperature range aids in selecting the proper oil. The temperature range for 0W-20 oil is -40 to 68F. In contrast, the operating temperature range for 5W20 oil is -31F to 68F and for 5W30 oil is -31F to 104F.