Advanced Full Synthetic Motor Oil, 5 Quart, Mobil 1 (Part No. 14991)
In This Article...
What makes 0W 20 and 5W 20 different from one another?
The ability of an oil to flow is measured by its viscosity. It also describes the thickness of the oil at various temperature levels.
When operating in freezing temperatures, 0W-20 motor oil performs like an SAE 0W weight oil. While 5W-20 oil functions as an SAE 5W weight oil.
The better the motor oil performs at low temperatures, according to SAE nomenclature, the lower the number before the ‘W’ is. Since 0W20 is much thinner than 5W-20, it is more stable at low temperatures and flows easily through the essential engine components.
A more suitable oil for a typical operating temperature range of -22F to 68F is 5W-20, which has a viscosity that is relatively thicker.
Is 5w30 a viable alternative to 5w20?
Yes. Using an oil with a greater viscosity, like 5w30, won’t cause short-term damage to your engine. To create uniform criteria for achieving realistic fuel efficiency and engine operating conditions, automakers collaborate closely with industry oil specialists like the SAE. These guidelines enable automakers to use particular oil grades and viscosities to achieve MPG and engine life objectives. The SAE claims that using low viscosity engine oil to increase fuel efficiency not only reduces frictional loss of the engine oil seal but also has no performance flaws.
Even though there are few practical differences between 5w30 and 5w20 in terms of fuel economy and engine wear, utilizing the recommended oil grade could void your powertrain warranty if the manufacturer. However, if your warranty is no longer valid, you can use any oil without any problems.
While using a thicker oil, such as 5w30, won’t cause your engine any short-term harm. It is advised that you, whenever feasible, abide by manufacturer recommendations.
How can the oil life of a 2007 Honda Odyssey be reset?
We regret to hear that your Honda Odyssey Touring is experiencing oil life issues. Fortunately, it’s simple to reset the oil light.
Use the trip button on the instrument cluster to clear the oil life light on a 2007 Honda Odyssey. Specifically, adhere to the following guidelines:
- The trip button is located in the instrument cluster’s lower right corner.
- The trip button should be constantly pressed and held for 10 seconds.
- Once you observe oil life, press the trip button.
- Set the on or accessories position on your key. Do not start the car.
- When it resets to 100%, press and hold the trip button one more.
- Hold off until the instrument cluster comes on.
- Release the button when it flashes the oil life.
Remember that your oil light differs greatly from your oil life indicator. If your oil light keeps flashing, you can have a serious problem, including a system leak or low oil pressure. Take your Odyssey to the mechanic in either scenario to fix the problem.
Car insurance is a requirement of car ownership, just like oil changes are. However, that does not imply that you ought to overpay for either. So, using the Jerry app, shop around for the best bargain on your auto insurance just like you would for an oil change.
Jerry is a certified insurance broker who offers estimates from numerous reputable and highly rated auto insurance providers. Jerry will assist you with purchasing insurance for your 2007 Honda Odyssey Touring when you locate a fantastic cost and cancel your previous policy. Customers often save close to $900 annually!
I’m using 5W20; when should I move to 5W30?
As you have probably already deduced, 5W20 performs better in cooler climates. 5W30 will be the best bet if you need engine oil for summertime performance. Only your own mechanic or the car’s manufacturer should advocate switching to this sort of oil, though.
By using an oil that your engine isn’t made for, you run the danger of damaging it. Keep in mind that 5W20 motor oil will flow through your engine more readily than 5W30.
If nothing else is specified, keep to 5W20 during winter. Use 5W30 in the summer if doing so won’t cause any problems for you.
What is engine oil 0W 20?
In colder temperatures, 0W-20 motor oil flows as freely as 0 Weight oil, but once the engine reaches operating temperature, it behaves more like 20 Weight oil. This guarantees that oil will begin to flow through the engine right away, lubricating important engine components even in cold weather.
The ‘W’ in viscosity descriptions does not, contrary to popular belief, stand for weight. In actuality, it represents Winter. This means that synthetic 0W-20 oil performs as a 0 Weight oil in cold areas but becomes as thick and viscous as a 20 Weight oil once the typical engine temperature has been attained.
Castrol EDGE, a cutting-edge full synthetic 0W-20 motor oil, is part of the company’s line of low viscosity 0W-20 lubricants. It is our toughest oil and is made to endure high temperatures and pressure. For those who want to push their car to the limit, it’s the perfect choice. Full synthetic 0W-20 motor oil liquid Castrol GTX MAGNATEC is designed with protective, clever ingredients that offer outstanding wear prevention.
What oil is recommended for the 2008 Honda Odyssey?
The 2008 Honda Odyssey’s 3.5 L six-cylinder engine needs Advanced Full Synthetic 5W-20 Motor Oil. In order to enhance engine performance and increase the amount of time between oil changes, synthetic oil is ideal for use in vans.
Honda advises having your Odyssey serviced every 7,500 miles in addition to replacing the oil to guarantee good operation. However, inspections will need to be done more frequently the more miles your van travels. When changing your oil, you should also do a multipoint inspection and rotate your tires.
Other maintenance components that ought to be examined once you reach 15,000 miles include the following:
- Adjusting the parking brake and the brakes
- Replace engine oil filters
- components for suspension
- connectors and hoses for the cooling system
- Bow-tie ends
- fluid conditions and levels
- brake lines and hoses
- boots for driveshafts
- boots and the steering gearbox
Even though the costs of car maintenance can pile up, there is one area where you can save money—especially when you buy with Jerry. Jerry examines prices from more than 50 top insurers as your personal pocket broker to find you the best offers.
Your Owner’s Manual
Although it’s really easy, owners manuals are frequently disregarded. To find out the appropriate viscosity of the motor oil you should use, always consult your owner’s handbook. Use the 0W20 and 5W20 variations interchangeably, depending on the weather, if they are both on the list.
Location
Given that both 0W20 and 5W20 motor oils operate in much the same temperature range, it is critical to think about where you will be using the car. The operating temperature range for synthetic oil is -40C to 20C for 0W-20 and -35C to 20C for 5W20 (5W20 synthetic oil). Being aware of these facts means two things:
- If you reside in a region with extremely low temperatures, such as Alaska or Maine, it is preferable to use 0W20 oil.
- In places like Florida when the temperature is above 20C/68F, you cannot use either 0W20 or 5W20.
Viscosity
The motor oil will flow more smoothly the lower the number is. At beginning temperatures, a 0W20 will be more fluid than a 5W20, but both will function similarly at normal engine operating temperatures. Keep in mind that engine oils naturally become thinner during heating and thicken while cooling.
Quality Testing
Any oil brand with the appropriate viscosity grade and the API donut symbol is acceptable. The oil has passed the testing required for SL service, as indicated by the starburst sign.
The API donut indicates that your motor oil passed the current SL service rating test after being tested by the American Petroleum Institute. ACEA (Association des Constructeurs Europeens d’Automobiles) is the counterpart of API in Europe.
Manufacturer Requirements
If your vehicle is substantially loaded, the machine designer would typically advise using an oil that has a high viscosity and is heavy like honey. However, if it moves quickly, a lubricant that can move out of the way and then move back in is preferable.
Fuel Economy
Despite the fact that both 5W20 and 0W20 (0W20 synthetic oil) can be used at 20C/68F, 0W20 is thinner than 5W20 at cold engine temperatures, particularly in the initial minutes after starting your automobile. Because it gives the car slightly higher fuel economy than the 5W20, new models specify it. The 0W20 model satisfies a turbo-diesel engine’s requirements as well.
Is 0W oil preferable to 5W?
The ability of a multi-grade oil to be pumped and flow at cooler temperatures is indicated by its first number; the “W” stands for winter. As a result, a 0W oil will be able to flow more quickly and reach crucial engine components better than a 5W or a 10W oil, especially at extremely cold temperatures and during engine startup.
The viscosity measurement value under engine operating circumstances is represented by the second number. For your engine to be properly lubricated and protected, this viscosity value is essential.
Can a 5W20 engine run on 0W20?
My car is intended to use 5W-20 motor oil, a reader writes. I unknowingly purchased 0W-20 and changed my oil without realizing it. Is it okay to keep using the 0W-20?
Our response: 0W-20 is typically a completely suitable replacement for 5W-20. Both goods are 20-weight motor oils when used in normal conditions. However, if the car is still covered by warranty, employing 0W-20 might not be appropriate in your situation (see more below).
Definition of 5w20 Vs. 5w30
The engine oil type 5w20 is distinguished by its oil weight of 20 in warm weather and a winter grade of 5. It has a lower viscosity than 5w30. While 5w30 has the same viscosity rating of 5 in the winter, it has an oil weight of 30 in the summer, making it thicker.
Working conditions for 5w20 Vs. 5w30
For use in cooler climates, use 5w20. As it moves swiftly and smoothly to deeper engine components with less friction, it makes it possible for a vehicle’s engine to start up rapidly. It immediately lubricates the components. In contrast, 5w30 performs well in warm environments. Unlike 5w20, it does not thin out quickly when exposed to heat. The engine components are therefore better protected overall when using 5w30 at operational temperatures.
Performance of 5w20 Vs. 5w30
These two engine oils function well in the environments for which they were created. Due to its low viscosity and reduced friction in the engine parts, 5w20 is a champion in colder regions with speedier engine starts. In hotter regions where a thick oil is required to resist the higher temperatures, 5w30 excels. Naturally, the engine will heat up more, necessitating a thicker oil. In colder climates, 5w20 is associated with higher performance and fuel economy, whereas 5w30 is associated with better overall engine component protection.