Is it time to replace the key fob batteries in your Honda Pilot? There are certain warning indicators to look out for. New batteries might be the answer if your fob’s signal strength seems to have decreased or if you have to touch the buttons repeatedly to get them to respond.
Car key fob batteries typically last three to four years with regular, everyday use. However, this can change a little, particularly if you frequently utilize the remote start feature on your car.
Fortunately, it’s not difficult to locate replacement batteries for the key fob in your Honda Pilot when the time comes. The 2017 Pilot is one of the several Pilot versions that just uses a single CR2032 lithium battery.
You will probably need a CR1616 battery if your Honda Pilot was manufactured in 2015 or earlier. These batteries can be purchased easily from most retail battery stores or on Amazon for about $4 for a bundle of two.
These batteries are widely available and reasonably priced because they are the same ones that are used in many watches and other small electronics. In fact, a four-pack costs roughly $5 on Amazon.com.
These batteries should be available for around the same price at any auto supply store, home improvement store, and perhaps even your neighborhood grocery store.
In This Article...
How is the battery in a pilot key changed?
Keep your thumb in place directly above the battery. Replace the dead battery with a new one by gently prying it out with your other hand. Reassemble the key fob by aligning the back with the front part and applying light pressure. You’ll hear a snap when it’s fastened.
What battery may a CR1616 be replaced by?
Unfortunately, the CR2016 battery cannot be used as a substitute for the CR1616 battery. The CR1616 has a 16 mm diameter and 16 mm height, while the CR2016 has a 20 mm diameter and 16 mm height.
Will a dead key fob prevent a car from starting?
If your key fob isn’t detected inside the car, the keyless entry system won’t start the engine. The system probably won’t be able to tell when the key fob is inside the car if it has a dead battery, which will prevent the engine from starting. By pressing down while placing the fob on the start engine button, you can get past this problem. Even though this should enable your engine to start, it is still beneficial to change the fob batteries whenever you have the opportunity.
After changing the battery, do Honda key fobs need to be reprogrammed?
You’ll need to reprogram your Honda key, which is likewise an easy and quick process, when the battery in your key fob needs to be changed.
If I change the battery, do I need to reprogram my key fob?
A remote key fob needs to be associated with your vehicle particularly in order to be secure.
This stops people who drive the same make and model of automobile as you from using their remote to access your car. You’ll need to reprogram the fob if changing the batteries has erased this connection or if it was somehow disrupted in order for it to once again recognize your automobile.
Standard programming sequence
Your key fob can typically be reconfigured by following this typical procedure:
Instead of starting and then returning to the locked position, turn the key into the run position. Repeat this multiple times.
You’ll typically hear a chime or other sound when you’ve cycled the key enough times. At that point, you can push the lock or unlock button on your key fob to hear another chime.
Can I substitute a CR2025 for a CR1616?
Can I replace the CR1616 battery with a CR2025? They can both be used interchangeably because CR1616 and CR2025 batteries have the same voltage. However, 2025s might not fit in cartridges that originally contained 1616s because they are a little bit thicker than the 1616s.
Can I use CR1632 for CR1616?
They are obviously not the same size. While CR1632 is 3.2mm thick, CR1616 is only 1.6mm thick. Additionally, ONE CR1632 is the thickness of TWO pieces of CR1616. Can I replace ONE CR1632 with TWO CR1616s? No. A series is created by combining the two batteries. As a result, 3+3=6V is the current-voltage. Greater than 3V is 6V. Electronic products will be ruined if used against their will.
What distinguishes the CR1616 from the CR1620?
Non-rechargeable manganese-dioxide lithium batteries with the model numbers CR1616 and CR1620 have the same diameter of 16.0 mm, but their capacities, as well as other characteristics like drain currents, are different. Battery specifications for the CR1616 and CR1620 models are 16.0 x 1.6 mm and 50–55 mAh, respectively.
What happens if the battery in my key fob dies while I’m driving?
This issue has been foreseen by automakers ever since the key fob was created. Nothing will happen if your key fob dies while you’re driving. Simply because the key fob is a locking and starting device only, the automobile will continue to run. The key fob has no influence over the ignition or engine once the automobile is moving.
Even though you’ll need to go to a general store or pharmacy to get the battery, replacing the battery in your key fob simply takes a few minutes if you’re pressed for time.
Why not take the time to renew your auto insurance at the same time as you’re replacing the batteries in your key fob?
You can access a new quotation with just a few taps on your phone screen by downloading the Jerry app and answering a few questions.
Jerry assists you in finding and comparing rates from more than 50 leading suppliers in minutes as a licensed broker. Jerry can assist you with purchasing new insurance and even canceling your existing policy when you find a lower rate.
How long does a low battery on a Honda key fob last?
A normal key fob with a low battery can last up to 4 to 6 years, whereas a smart key fob with a low battery can last for up to 2 to 3 years.
How can I program my key fob for the 2017 Honda Pilot?
- Enter the vehicle from the driver’s side. Ensure that every door is closed but not locked.
- Turn the ignition on with the key.
- To activate accessory mode, turn the key in the middle.
- Turn off the ignition immediately after pressing the Lock button on the key fob.
- Steps 3 and 4 are repeated twice more (in total, you will do them three times). Complete each step quickly, around five seconds after the one before it.
- Turn the key to accessory mode a fourth time. Once more, press the Lock button. Your car will make a locking clunk noise as it locks. The key fob is in programming mode, according to the noise.
- Remove the key from the ignition and turn off the engine.
- Check to check if your remote has been successfully programmed. Take note that testing your remote requires you to remove it. If you leave it running, it won’t function.
Although you can try these steps to program your key fob yourself, keep in mind that depending on the sort of key fob you have, you could want expert assistance. The manufacturer must program key fobs that are more recent and don’t have a physical key.
While thinking about your car, take a moment to check your auto insurance rates to make sure you aren’t spending too much. (Hint: most likely, you are!)
In less than a minute, Jerry will compile comparative quotes from leading suppliers. You don’t need to fill out any lengthy forms or make any phone calls because the Jerry app collects your information from your previous insurer. In essence, you have full coverage and discounts without any hassles!