If the vehicle rotates more or less than expected during a corner, VSA aids in stabilizing the vehicle. Additionally, it helps you keep traction on slick conditions. It accomplishes this by modulating engine output and applying the brakes only when necessary.
If the tyre type and size are combined, the VSA may not operate as intended. Use the recommended air pressures and the same kind and size of tire.
There can be an issue with the system if the VSA indicator illuminates and remains illuminated while driving. Although it might not affect regular driving, you should nonetheless have your car checked out by a dealer right away.
VSA is unable to improve stability in all driving circumstances and does not have complete control over the braking system. You still need to maintain a sufficient margin of safety while driving and turning at speeds adequate for the road conditions.
Your car will be able to brake and turn normally when the button is depressed, but VSA traction and stability enhancement will be less effective.
When your car becomes stuck in shallow mud or new snow due to certain uncommon circumstances, it could be simpler to release it if the VSA is temporarily turned off.
The traction control feature is less effective when the button is pressed. The wheels can now spin more freely at low speeds as a result. If you are unable to release your car while the VSA is on, you should only try to do so with the VSA turned off.
Make sure to turn VSA back on right away after you’ve freed your car. Driving your vehicle while the VSA system is off is not something we advise.
While doing system checks right away after starting the engine or while driving, you could hear a motor sound coming from the engine compartment. That is typical.
In This Article...
What does VSA signify on a Honda?
The exclusive name for the electronic stability control system found on Honda and Acura vehicles is VSA, or “vehicle stability aid.”
Driving while the VSA light is on is it safe?
You should be mindful of a second VSA console light, though. An issue with the system itself exists if the VSA System Indicator illuminates and remains lit. If you see it, stop when it’s safe to do so, turn the engine back on, and continue driving. If the light comes back on, schedule a service inspection to find the problem.
Driving your automobile is safe for the time being, but since the VSA system won’t be functioning to protect you in hazardous situations, it’s a good idea to drive cautiously until the issue is resolved.
Whether you are a current Birchwood customer or a new one, our service department would be pleased to assist you with any VSA problems with your Honda.
What triggers the VSA light to illuminate?
There are various reasons why the VSA system light is on. primarily to demonstrate that the stability aid system of the car is engaged. which provides your car with the help it needs. The light can switch off if it is left on for a long time.
You can determine if there is a problem and why the VSA light is on by running a diagnosis.
The vehicle has the wrong tires
If the VSA detects that one or more of your wheels are not turning at the proper pace, the VSA light will illuminate. For wheel size information, consult your user manual.
The VSA system was accidentally turned off
If the VSA light illuminates and remains on, you most likely unintentionally turned it off. This indicates that the Honda’s VSA system is no longer giving your car the traction and stability support it requires.
The VSA activation indicator light turns on to alert you that the VSA system has been switched off if the VSA light is turned off.
You might have to switch it back on in this situation. In some cars, the switch is located beneath the left vent. In certain vehicles, the button is located on the center dash to the left of the steering wheel.
Something else is the wrong
If the vehicle stability system has been disabled as a result of other systems failing, the VSA indicator may turn on with several lights. In this situation, it is important to get the issue with your car looked at.
There is a problem with the system
The VSA indicator light is the second VSA system light. If it strikes you, there is something wrong with the system. When you see it, it is advisable to stop, turn the engine off, and then turn it back on.
On or off, should VSA be set?
Many of us simply get in our Crosstour, turn the key, and drive away. In whatever weather, we carry out this activity. The VSA button, which enables us to disable the VSA feature, is located to the left of the steering column, but we barely ever think about it. Remember that Honda wouldn’t have given us the option to turn this function off if they didn’t want us to be able to regulate it.
Those unfamiliar with the VSA functionality should know the following:
While accelerating on slick or loose road surfaces, VSA helps you maintain traction while stabilizing your car through twists and corners. It accomplishes this by reducing engine output and activating the brakes only when necessary.
Perhaps while you are driving up a hill covered with fresh snow, you’ll notice that your engine power has diminished and it seems like your car is having trouble climbing the hill. This is due to the fact that your VSA is reducing engine power and applying brakes to slipping wheels, giving you just enough power to climb the hill.
Press and hold the VSA button until you hear a beep to turn VSA on or off. A VSA OFF indicator will turn on when VSA is turned off. Every time you start the car, VSA is automatically on, even if you last turned it off.
What time do you switch off your VSA then? Here is when you should turn it off, per the owner’s manual.
if your car becomes stuck in mud, fresh snow, or sand. Turning off your car will make it much simpler for you to liberate it.
Although I thought I would offer other reasons why you might wish to switch off your VSA as this board does not support the following behaviors:
Some motorists think that turning off VSA gives them a better sense of the road. That makes sense to me.
How can I repair VSA?
When it is safe to do so, pull over to the side of the road and turn off the engine if the VSA indication illuminates while you are driving. Restart the engine to reset the system while keeping an eye on the VSA system indicator. Have the VSA system inspected by your Acura dealer if the indicator stays on or turns back on while you are driving.
A VSA light: is it serious?
While you are driving, if the VSA warning light illuminates and remains on, there might be a problem with the system. While the VSA warning light is on, you can still drive because your braking and cornering abilities will be normal without the stability benefits the VSA System offers.
How can I stop VSA Honda?
The traction control system is comparable to vehicle stability assist. It prevents the car from spinning out or veering off track. The sensors within the car that make up VSA measure how quickly your wheels are rotating.
If you’re traveling too fast for the conditions, the ECU will decide whether to cut off the engine’s power, apply the brakes selectively, or do both.
On your Honda Accord, you can increase wheel spin while retaining the ability to brake selectively by disabling the VSA. However, it is not advised to do this when it is raining since you risk losing control of your vehicle or hydroplaning, which occurs when your tires are being exposed to too much water while travelling quickly.
Only if you’re having trouble climbing a hill due to wheel spin or if you ever get trapped on ice and need a little extra power to get out of it will you need to turn off the VSA on your Honda Accord. Turn the vehicle stability assist back on once you’ve fixed the problem.
By pressing and holding the VSA button in this circumstance, your Honda Accord’s VSA can be turned off. Normally, the VSA button can be found under the left vent next to the steering wheel. Hold down the button until a beep is heard and the dash’s “VSA OFF” light indicator appears.
What occurs if I deactivate VSA?
Every time you start the engine, even if you had previously turned off VSA, it is activated. Your car’s braking and cornering capabilities remain unaffected if you switch off VSA, but the traction and stability enhancement it provides are less effective.
To turn VSA on or off, press and hold the VSA OFF button until you hear a beep. When the system is turned off, the VSA OFF indicator displays.
When a car becomes stuck in mud or snow, traction control stops working, which may make it simpler to try to remove it.
How can I determine my VSA?
To turn VSA on or off, press and hold the VSA OFF button until you hear a beep. When the system is turned off, the VSA Off signal shows up. Traction control is disabled when VSA is turned off, allowing the wheels to spin more freely at low speeds.
What does the triangle in a Honda with the exclamation point mean?
There is a clear explanation if you notice the exclamation point in the triangle of the warning light. When a problem with the system is discovered, this icon, which stands for your Honda vehicle’s Vehicle Stability Assist system, will illuminate your dashboard.
If you turn slightly more or less than you intended, the Vehicle Stability Assist technology is intended to steady your Honda vehicle while corning. This technology can also be useful when accelerating on slick or difficult terrain since it controls the engine power and selectively applies the brakes to ensure that your car has the best possible traction.
Does turning off VSA speed up your vehicle?
Unless you conduct a “power brake” launch on glazed, wet asphalt, which would produce a very brief period of wheel spin and a drop in engine power, in my experience, neither acceleration nor feel increase as a result of “turning VSA off.”
Traction control is VSA?
Electronic Stability Control is the general term used to describe the VSA system’s primary purpose (ESC). The system also has traction control capabilities. On the driver’s side control panel, this button is located. Press and hold it until you hear a beep to partially disable VSA functionality/features.
How soon should I deactivate my stability control?
When Should Traction Control Be Disabled? When you’re driving, it’s crucial to have traction control set to 95% of the time. The safety feature, however, could be detrimental in some circumstances. For instance, it’s preferable to keep it off if you find yourself buried in snow, sand, or mud.