Honda PILOT User Manual. Page 1. Tire Fill Assist and Tire Pressure Monitoring System (TPMS). while you are driving, keep an eye on your tire pressure. The Low Tire Pressure/TPMS indication turns on and a message shows on the driver information interface if the tire pressure in your car drops significantly.
In This Article...
Is my car safe to drive with the TPMS light on?
There are several possible meanings when you see that silly little light with the exclamation point glaring back at you. It’s frequently anything as harmless as temperature changes that result in a change in the tire’s air pressure. In more severe situations, a puncture or other damage has caused the tire to lose pressure. The sensor can also be activated and result in the light coming on if your tires are overinflated.
Is It Safe To Drive With TPMS Light On?
To avoid seeming like Debbie Downer, we’ll simply say no. Driving around with your TPMS light on is not safe. You can’t tell how quickly your tire is losing air or how long it has been over- or underinflated without doing a tire examination. The best course of action is to check the current inflation level of each tire with a tire pressure gauge.
When the tire inspection light appears while you are driving, slow down and get to the closest gas station or service facility.
How can the TPMS light on a Honda Pilot be turned off?
Specs for models with touchscreen displays:
- Go to the Home screen and choose Settings.
- choose a vehicle.
- Decide on TPMS Calibration.
- Choose Calibrate.
Models devoid of a touchscreen:
To make and enter selections in the Driver Information, use the steering wheel buttons.
Select it after scrolling to the screen for the vehicle settings.
What does the Honda Pilot’s TPMS light mean?
When one or more of your tires deviate from the suggested tire pressure, your Honda’s tire pressure monitoring system (TPMS) is intended to notify you. In older Honda models, the warning light is more of a warning message that expressly states, “Tire Pressures Low.” This warning light is often yellow and resembles a cutaway tire with an exclamation point.
Honda owners who drive vehicles with the Tire Pressure Monitoring System (TPMS) with Tire Fill Assist have access to even more data because the system also shows the current tire pressure for each tire and lets the driver know which tire or tires require maintenance.
Is it a cause for concern if my TPMS light is on?
The TPMS (Tire Pressure Monitoring System) is designed to notify you when a tire’s pressure is too low and may result in hazardous driving situations. If the indicator is on, your tires may not be properly inflated, which might result in premature tire wear and even tire failure. It’s critical to comprehend the value of appropriate tire inflation and how TPMS can prevent a potentially hazardous situation.
Both excessive and inadequate tire inflation can result in early tread deterioration and potential tire failure. Increased traction, early wear, and an inability to withstand impact from the road can all be effects of overinflation. The middle of the tread on tires with excessive air pressure may prematurely wear out. Underinflation, on the other hand, results in slow tire reaction, reduced fuel efficiency, excessive heat buildup, and tire overload. Both sides of the tread edges or shoulders will prematurely wear out on a tire that is underinflated.
Finding the TPMS indicator on your dashboard is easy if you’re just learning about tire pressure sensors. It is a light that has a horseshoe form with an exclamation point in the middle.
Why are my tires fine but my TPMS light is on?
It’s likely that one or more of your tires have low air pressure if you see the tire pressure indicator turn on. However, even if your tires are in good condition, there are a number of things that could cause the sensors to go off, so you shouldn’t rely only on the data from the tire pressure monitoring system of your car.
We’ve talked about some additional aspects of automobile maintenance in this piece. Read these articles if you have some time:
Can a high tire pressure turn on the TPMS light?
Examine the tire pressure in each of your four tires as soon as the TPMS Light illuminates. If a tire is low on air, fill it up with air until it meets the manufacturer’s recommendations, which may be located on the inside of the driver’s side door panel. Additionally, if the tire pressure is too high, the TPMS Light can illuminate. Check the pressure in each of the four tires if this is the case, then deflate as necessary.
Any of the following three possibilities for the TPMS light to turn on are:
When the TPMS light illuminates while you are moving, at least one of your tires likely has an inaccurate air pressure. Check the tire pressure and locate the closest gas station. Underinflated tires can wear out prematurely, limit fuel efficiency, and pose safety risks if driven on over an extended period of time.
TPMS flashes on and off: Changing temperatures may be a blame for the TPMS Light occasionally flashing on and off. The light may go out after the car warms up or when the temperature rises during the day if the pressure dips at night and rises during the day. The weather is causing the pressure in the tires to fluctuate if the light turns back on as the temperature drops. It is a good idea to gauge the tires and add or remove air as necessary.
TPMS light flashes for a minute or so after you turn on your car, then stays on: If the TPMS Light flashes for a minute or so after you turn on your car, then stays on, the system is not working properly. Your car has to be inspected as quickly as possible by a professional. If you must drive, exercise caution because the TPMS system will no longer warn you if your tires are underinflated. If you have to drive before a professional can examine your automobile, check the pressure in each tire with a gauge and add more if necessary.
Should the TPMS be reset after purchasing new tires?
After changing or rotating your tires, or after adding new sensors, you should always reset your TPMS. Even after you have inflated your tires, some sensor manufacturers advise restarting the device. By teaching the primary TPMS system to identify the sensors in their new locations, resetting the TPMS is frequently referred to as retraining the system. TPMS reset procedures vary from vehicle to vehicle and typically involve a specific sequence of ignition and pedal actions, a configuration change in your dashboard menu, or the use of a TPMS Reset Tool.
Where is the button to reset my TPMS?
Tire pressure monitoring system is referred to as TPMS. The TPMS reset button is often located below the steering wheel. Your car’s TPMS needs to be electronically reset after you replace the tires in order to erase the error message. Hold the TPMS reset button down until the tire pressure light blinks three times, then let go of the button to complete the process. Your car should be started, and the sensor will refresh after 20 minutes.
How quickly does the TPMS light disappear?
Don’t start the car; just turn the key to “on.” Till the tire pressure light blinks three times, press and hold the TPMS reset button. Press the button again to start the vehicle. Within twenty minutes, the light ought to turn off.
My TPMS light won’t turn off; why?
Try the following if your TPMS light is still on after you have inflated your tires to the recommended pressure: 10 minutes at a speed of 50 mph would be plenty. When you start the car again, the TPMS light ought to be off because this ought to reset the tire sensors.
Which tire is low, and how do you know?
Put your hand on the tire and push down. Low tire pressure will result in a soft, mushy tire. The tire is overinflated if it feels like rock and you cannot apply any pressure to it at all. Keep your touch on the tire and pump air into it if it seems too low.
How does the TPMS identify each tire?
The anti-lock brake system’s wheel speed sensors are often used by an indirect TPMS. On-board computer systems can employ these sensors to compare wheel revolution rates between individual wheels as well as to other vehicle operation data, such as speed.
The computer can determine the relative size of the tires on your car based on how quickly each wheel rotates. The computer determines that a tire is underinflated when a wheel starts spinning more quickly than normal and warns the driver accordingly.
Therefore, a device for monitoring tire pressure indirectly does not truly measure tire pressure. The same kind of measurement you may observe with a tire gauge is not being processed electronically. An indirect tire pressure monitor only counts the rotational speed of your tires and sends instructions to the computer to activate the indication light when something seems off with the rotation.
How much does a TPMS sensor replacement cost?
Replacement of a TPMS sensor typically costs between $208 and $250. Between $55 and $69 is the expected range for labor costs, while $153 to $181 is the range for part costs. Taxes and other costs are not included in this range, nor are your particular vehicle or geographic area taken into account.
In what location is the TPMS sensor?
In the US, direct TPMS usage is more prevalent. The sensors are either housed in the tire pressure valve, which also serves as an antenna, or they are band-clamped to the wheel rim. These gadgets deliver the data to an on-board computer.
What occurs if TPMS sensors are not replaced?
Customers who ask you to turn off their TPMS light just and leave the underlying problem unattended can put you and your business at unnecessary risk. You are breaking the NHTSA’s “make inoperative provision” if you switch off the light without resolving the problem, which makes shops liable for deactivating the TPMS. It is your duty to let the customer know this and to decline service if they don’t want the problem handled properly.
It is strongly advised to replace all sensors at once if a single sensor has reached the end of its useful life. When one sensor fails, the others are likely to follow suit quickly, just like with headlights. The same holds true for replacing an impact sensor or damaged valve stem. Your consumers should be aware of this since it will assist you give their vehicle the finest care possible. They also find it convenient.
The TPMS sensors must always be reactivated and calibrated for drivers who change their tires as the seasons change. If you don’t do this, the car’s TPMS won’t function properly and could turn on the TPMS light.
Can you manually reset the TPMS?
Turn the key to the “on” position with the car off, but don’t let it run. When the Toyota tire pressure sensor blinks three times, hold down the TPMS reset button until it stops blinking. Start the car, then let it run for 20 minutes to let the sensor reset. Under the steering wheel is typically where you’ll find the TPMS reset button.