In my shop, I had to deal with this only last week. The supplemental restraint system’s SRS light serves as a warning light (airbags). A system issue is indicated by the presence of an SRS light. The fuse for the SRS unit is the first item I would check. This can only be verified with some form of scan instrument. A Solus Pro was mine. The first portion of the numerical error code is displayed by the scanner’s slow flash, and the second portion is displayed by the scanner’s quick flash. You should examine the code and go from there, in my opinion. It will probably display a “non-functional” code; this is a regular issue. In the 2000 Accord EX that I worked on last week, I had to completely replace the SRS unit.
In This Article...
Drive while the SRS light is on?
One should not ignore the airbag light or the SRS warning when they appear. It doesn’t necessary imply that the vehicle is unsafe to operate, but doing so is risky and akin to playing with fire. When this light is on, it indicates that your safety system isn’t functioning properly and, in some situations, that your airbags aren’t functional and won’t deploy in a collision.
Can I drive safely with my SRS light on? The answer is negative, as there is a significant risk if an accident were to occur, even if it is possible that the airbags may still deploy with the light on. We advise having a specialist examine it and identify the problem so that it may be corrected right away.
What would activate the SRS light?
Your car’s internal computer has disabled the airbags if the SRS (Supplemental Restraint System) indicator remains illuminated. This indicates that there is a problem with the airbags. Although your airbags won’t deploy at random, they might not in the event of an accident, therefore it’s crucial to locate the issue and have it fixed by a qualified repair.
Your car’s SRS light will come on for around 6-7 seconds when you turn the key, then go out if it detects no abnormalities. You may have an issue with the airbags itself, a loose wire, a broken seat belt buckle, or an issue with the Engine Control Unit (ECU) if the SRS light remains on or starts flashing intermittently. To get you back on the road safely, our mechanics at My Auto Solutions in Buford, Georgia, provide airbag module reset, removal, and installation services.
How can I make my SRS light turn on?
The airbag light connects the seat belt system and the airbag system as part of the Supplement Restraint System (SRS) in automobiles (and vice-versa). When you turn on your automobile, the airbag light comes on for around seven seconds before going out, signifying that the internal system check was successful and finished. When the airbag light either never turns on or stays on while blinking, an issue exists. The airbag light needs to be reset at this stage.
Examining seat belt components, fixing bad clock springs, and replacing faulty sensors are a few techniques for turning off an airbag light. New bulbs or a fully charged battery are other options. While most repairs can be done without a professional, others may.
The following 10 steps will reset your airbag light:
- Turn on and off your ignition.
- Test drive your car when it has been restarted.
- Check the airbag switch for the passenger.
- Check to see if the seat belts are in place and functioning properly.
- Check to see if the passenger seat sensor is off.
- Use a scanner with the ability to reset the SRS or airbag light.
- Fix the broken airbag sensors.
- Replace or repair a broken clock spring.
- Check to see if the airbag is working properly.
- seek for a specialist’s help.
Although not exhaustive, the list above includes tried-and-true methods for tackling the problem. Some of them might not apply to your vehicle because compatibility is always based on the year, make, and model. It is recommended that you have your service manual on hand when carrying out any of these fixes. Always follow the manufacturer’s recommendations, too. Let’s get started on resetting your airbag light right away.
How much does a Honda Civic SRS light repair cost?
Cost estimation for the replacement of the occupant sensor in a Honda Civic. A replacement air bag occupant sensor for a Honda Civic costs, on average, between $974 and $999. While parts are priced at $878, labor costs are predicted to range between $96 and $121.
How can I interpret the Honda SRS code?
Follow these steps to read the SRS codes on your Honda:
- Step 4: Insert your automobile key into the ignition, but do not start the car (just put it in accessory mode). The SRS light should start flashing.
- Step 2: To make a U shape, untwist a paper clip.
- The first step is to unlock your automobile and unlock the driver’s side door. The ODBII port is situated between the dashboard and the steering wheel. To locate this port, you might have to stoop down.
- Step 3: Connect the paper clip to ports 4 and 9 of the ODBII.
The main code and subcode are the two components of an SRS code. Count the flashes to determine the main code.
- You’ll witness two sets of four continuous flashes for values of 20 and above, which equals 20, and then add further flashes together. Two sets of four continuous flashes followed by one single flash, for instance, equals 21.
- For values 11 through 15, adding extra flashes together makes the value of 10 equal to every four quick flashes. For instance, two single flashes followed by one set of four continuous blinks equals twelve.
- These will be single flashes for values ranging from 1 to 10.
Count the number of blinks you observe to decode the subcode. This equals 5 if there are 5 single blinks. DTC 21-1 is represented by the code when the main code is 21, and the subcode is 1.
To analyze the problem with your car, see the SRS code chart, which defines each code in detail. Searching Google will bring up this graph.
You obviously care about your car because you are taking the time to understand SRS codes. Therefore, spend some time reviewing your auto coverage to be sure it still satisfies your needs today and that you aren’t paying too much for it.
In less than a minute, the Jerry app will produce comparative quotations from leading suppliers. Jerry collects your data from your former insurance, so you won’t have to fill out any time-consuming forms or make any unnecessary phone calls. The typical user of Jerry saves $879 annually on auto insurance.
What is the price of replacing an airbag sensor?
Depending on the automobile model and labor charges, the cost to replace an airbag sensor ranges from $100 to $600. A sensor for an airbag costs between $50 and $300, as does the labor.
Both the airbag sensor and its replacement are delicate parts. Even for an expert, correctly diagnosing and installing the airbag sensor can take up to two hours.
The airbag sensor itself is typically not very expensive; you may anticipate paying between $50 and $300 for a brand-new one. Never purchase aftermarket sensors; don’t take the chance. Always purchase OEM original, authentic items.
You can save money by replacing the airbag sensor yourself if you are highly confident working on cars and meticulously following the repair manual.
If you have even the least qualms regarding the replacement, have a pro handle it.
Keep in mind that it is a crucial component, therefore installing it properly is important in case of an accident. Additionally, if you make a mistake, there is a chance that all of the airbags in the car will deploy, which will cost thousands of dollars to fix.
What does it cost to repair the airbag light?
Reset Airbag Light, at No. 1 This procedure typically takes several hours and costs a few hundred dollars, though depending on the car, it might cost as much as $600.
SRS malfunction: what is it?
Have you ever seen a “SRS” light flash on your dashboard? Few Mercedes owners are aware of what this light signifies. Actually, its full name is Supplement Restraint System. This applies to things like airbags and your safety belts. Your airbags might not deploy in an accident if your SRS is malfunctioning. You can see why; it’s crucial to make sure these things are in good operating order!
- the most recent diagnostic technology
- a three-year, 36,000-mile warranty
- master certified technicians for Mercedes-Benz
- car on loan with extensive repairs
Our staff members are genuine Mercedes enthusiasts, and they will handle your car as if it were their own. Come and enjoy European auto repair with a personal touch, we cordially invite you.
Can the airbag light self-reset?
It’s time to discover how to reset the airbag light now that we understand how airbags work. If you are not completely confident in your abilities, have only professionals operate on the airbag system. To reset the airbag light, adhere to these instructions:
Step 1: Check the passenger airbag switch
There is a “passenger seat Airbag on/off button” in some autos. When attempting to remove the airbag light, you ought to start by doing this. It’s possible that someone turned it to Off by accident before you, which will cause the airbag light to remain on in most cars. If you open the passenger door or glove box, you might be able to view this button, which is often located on the passenger side of the dashboard.
Step 2: Read the trouble codes with an OBD2 Scanner
Working with your airbag system is essential, therefore always use an OBD2 scanner to read the fault codes to determine where to begin troubleshooting. Never resolve the issue brought on by the airbag light before clearing the trouble codes. Continue the diagnostic by reading the codes to learn what might be the issue’s cause.
Step 3: Repair the fault
Never simply reset the airbag light without fixing the issue. When a collision occurs, this may cause the airbags to deploy or not work at all. If you are unsure of how to repair the airbag’s parts, let a pro handle it. Always remember to disconnect the battery connection before servicing an airbag. After fixing the issue, the airbag light frequently goes away by itself, although not in all car types.
Step 4: Clear the trouble codes
It’s time to reset the engine light when you have completely installed the new parts and are confident that everything is installed correctly. There is no other way to accomplish this; you must use an OBD2 scanner. Make that the airbag light is reset and that it no longer appears on the dashboard. If the problem persists, read the codes again and look for any error codes.
Step 5: Restart your car & test-drive.
Restart your engine and take a test drive if your dashboard’s airbag light appears to have disappeared. After a test drive, if the airbag light has disappeared, there is a good likelihood that the issue has been resolved. Reread the codes and carry out the steps again if the issue reappears.