The bolt pattern of the 2003 Honda Accord Sedan EX V6 is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.
You should measure from the center of one lug to the outer edge of the lug farthest from it in order to obtain an accurate measurement of your five lug bolt pattern without the use of a bolt pattern tool.
In This Article...
Are there variations in Honda lug patterns?
Knowing the correct lug pattern for your car is crucial if you want to treat your ride to a new set of rims because lug patterns differ significantly between Honda models.
Whether you drive a compact Honda Civic or a roomy Honda Odyssey, you might wish to upgrade or replace your current wheels. The size of your wheels or rims will depend on your car’s lug pattern, so getting the numbers correct is essential to finding the optimum fit.
What automobiles feature a 5×114-3 lug pattern?
Honda Civic or Mazda Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3 are the most popular vehicles with PCD 5×114,3.
A 5×114-3 bolt pattern is what?
The stud count (five) and bolt circle measurement (114.3), the notional circle determined by the studs’ centers, make up the 5×114.3 Bolt Pattern or Pitch Circle Diameter (PCD).
Vehicles from Acura, Alpine, Aston Martin, BAIC, BYD, Baojun, and Changan all have the 5×114.3 bolt pattern. The following is a complete list of car makes and models:
What kind of tires is a 2003 Honda Accord equipped with?
You have a wide variety of tire options to choose from when outfitting your Accord because these factory tire sizes include 215/55R17 tires, 225/50R17 tires, 235/35R19 tires, and 235/40R19 tires.
What is the 2002 Honda Accord’s bolt pattern?
The bolt pattern of the 2002 Honda Accord Sedan EX V6 is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.
Are wheels from Civic and Accord interchangeable?
It depends is the simplest way to respond to this query. The number of lugs and bolt pattern varies somewhat between each vehicle’s years. For instance, the 2006 Honda Civic will accept the wheels from a 2003 Honda Accord but not a 2005. Understanding bolt patterns and other aspects of wheel size when it comes to any vehicle is covered in more detail below.
What is Bolt Pattern?
When determining whether specific wheels will fit your car, the number of lugs is crucial. The most popular ones are 4-, 5-, 6-, and 8-lug. Simply counting the number of lugs on the wheels will get this figure. Once this has been established, the diameter between the bolts, which is typically stated in millimeters, must be measured. The distance between the two opposite bolts is measured. For a guide on how to calculate the distance based on the quantity of lugs on your wheel, see the illustration below.
What is the diameter of my wheels?
This only refers to the wheel’s overall size. For instance, if a wheel is specified as 17×8.5 +35, it has a 17-inch diameter. We shall discuss width and offset, the other 2 numbers, in more detail later. When turning a vehicle with larger wheels and tires, you must account for clearance to ensure that none of the other sections of the vehicle are touched. These must be done when the vehicle’s suspension is depressed and on the ground because it will behave significantly differently from when it’s on a jack and raised above the ground.
What is the width of my wheels?
A wheel’s width can be calculated by taking measurements from the inside of one wheel lip to the other, across the wheel. This is crucial for figuring out which tires will fit your wheels and whether the wheels will fit within the wheel wells.
What are my wheels offset?
The distance from the wheel’s center line to the mounting face’s back is known as the wheel offset. Wheel offset comes in three flavors: positive, zero, and negative. A hub mount for a wheel with a positive offset will be shallow and placed closer to the street side of the wheel. A hub mount with a zero offset will be positioned directly in the center of the wheel. A hub mount with a negative offset will be deeper and located closer to the rear of the wheel.
Are the wheels from Honda and Toyota compatible?
Hello, no, your Honda rims won’t fit on your Toyota Corolla—at least not the OEM ones. The center bore on your Toyota rims is 54.1mm, whereas the center bore on your Honda rims is 56 or 64mm, despite the fact that the bolt pattern is the same. The center hole in the Toyota rims is too small for the Honda hub, thus they won’t fit on the hub.
What is the 2004 Honda Accord’s bolt pattern?
The bolt pattern on the 2004 Honda Accord Sedan EX V6 is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.
Q: What rims are interchangeable between different cars?
Fortunately, any car has a replaceable rim available. All you need to do is make sure the new wheel’s bolt patterns, size, and offset match those on the old one.
By looking at the sticker label on the inside of the driver’s door or measuring the rim, you may determine the new wheel’s proper size. Take your car to a mechanic if you are not the do-it-yourself kind.
Q: What cars use a 5114 3 bolt pattern?
A wheel hub with 114, 3 and 5 bolts or nuts is all that a 5114 3 bolt pattern is. 5114,3 bolt designs are used by various car manufacturers and models.
Can 5×114-3 bolts be used with 5×100?
As shown in the image, 5×114.3 would imply 5 lugs (or holes), and the circle’s diameter would be 114.3 mm. A 5×100 would contain 5 holes as well, but because of the circle’s 14.3 mm lower diameter, the two are incompatible.
Some wheels have 10 holes and are classified as 5×100/5×114.3. The first set of five is 5×100, while the second is 5×114.3. By making one wheel suitable for numerous more cars, this helps the wheel manufacturer save money.
How can I determine if my wheels are 5×114-3?
The diameter of a hypothetical circle created by the centers of the wheel lugs is known as the bolt pattern or bolt circle. Bolt patterns might have four, five, six, seven, or eight lugs; however, tuner applications normally have four or five lugs. Bolt patterns may be referred to as both since bolt circles can be measured in both inches and millimeters (i.e. 5×114.3 mm is also referred to as 5×4.5). A bolt circle measuring 5×114.3 mm would denote a 5 lug design on a circle of 114.3 mm in diameter (or 4.5″).
What automobiles have a bolt pattern of 5×115?
Many fantastic cars, including Buicks, Cadillacs, Chevrolets, GMs, Chryslers, Dodges, Pontiacs, and more, come with wheels with a 5×115 bolt pattern. With 5×115 wheels, you can enhance the appearance of your ride, whether you’re driving a high-end luxury car or a classic American muscle car.
How is a 114.3 bolt pattern measured?
Measure the distance between the outside of one stud and the middle of the next (skipping a stud). The figure you see will represent the bolt pattern’s real size. Therefore, if you observe 4 1/2 inches, you have a 5 on 4 1/2 bolt pattern (also 54.5 and 5114.3).