The bolt pattern on the 2007 Honda Odyssey Touring with PAX Tires is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.
You should measure from the center of one lug to the outer edge of the lug farthest from it in order to obtain an accurate measurement of your five lug bolt pattern without the use of a bolt pattern tool.
In This Article...
What automobiles have a 5×114-3 bolt pattern?
Honda Civic or Mazda Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3 are the most popular vehicles with PCD 5×114,3.
Are the wheels from Honda and Toyota compatible?
Hello, no, your Honda rims won’t fit on your Toyota Corolla—at least not the OEM ones. The center bore on your Toyota rims is 54.1mm, whereas the center bore on your Honda rims is 56 or 64mm, despite the fact that the bolt pattern is the same. The center hole in the Toyota rims is too small for the Honda hub, thus they won’t fit on the hub.
The 5×120 bolt pattern is what?
The bolt circle dimension (120), the notional circle determined by the studs’ centers, and the stud count (5) make up the 5×120 Bolt Pattern or Pitch Circle Diameter (PCD).
Vehicles from Acura, BMW, BMW Alpina, BYD, Bentley, Buick, and Cadillac all use the 5×120 bolt pattern. The following is a complete list of car makes and models:
What is the Honda Odyssey’s bolt pattern for 2015?
The bolt pattern on the 2015 Honda Odyssey EX is 5-120 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 120 mm (4.72 inches).
Q: What rims are interchangeable between different cars?
Fortunately, any car has a replaceable rim available. All you need to do is make sure the new wheel’s bolt patterns, size, and offset match those on the old one.
By looking at the sticker label on the inside of the driver’s door or measuring the rim, you may determine the new wheel’s proper size. Take your car to a mechanic if you are not the do-it-yourself kind.
Q: What cars use a 5114 3 bolt pattern?
A wheel hub with 114, 3 and 5 bolts or nuts is all that a 5114 3 bolt pattern is. 5114,3 bolt designs are used by various car manufacturers and models.
Can Camry wheels fit Honda rims?
Best Response. In a nutshell, YES, your 2009 Camry SE will fit the 2013 Honda accord wheels. The wheels and tires on your Camry will fit properly if your tires are the same size as those on your Honda (P215/55R17).
How can you tell if a wheel will fit your vehicle?
The two simplest methods are to look at your car’s sticker plate, which should be inside the driver-side door, or to search online for the precise make and model of your car’s characteristics. You can get the typical rim size from there.
How can I determine if my wheels are universal?
The answer is no, a universal wheel does not exist. What wheels can go on your car depends on a variety of things.
Width and Diameter The wheel’s diameter and width are two of the most important variables. Every car will have a variety of wheel diameter sizes that will snugly and properly fit, ranging in size from several inches. Typically, this happens as a result of automobiles having multiple sizes and wheel selections for each trim level (i.e. base modelpremium luxury model). This gives the consumer the choice to select wheels based on their aesthetics and functionality.
Both the diameter and width of the wheel are expressed in inches. The rim width is the distance between the edges of one bead seat and the other bead seat, whereas the wheel diameter is the height of the wheel across the center.
Offset The offset of a wheel is the separation between its centerline and its mounting surface. It is expressed in millimeters and can either be positive or negative depending on how far the mounting surface is from the center line. When the mounting surface is in front of the wheel centerline, the offset is positive; when it is behind the wheel centerline, the offset is negative.
This is crucial since you have to stay inside your car’s specified offset range. The wheel may not provide enough space for the wheel hub and brakes to operate properly if the alteration is too radical. The turning radius of your car may be affected by an incorrectly offset wheel, and the wheel may rub against the wheel well.
The diameter of the circle that goes through the center of all the studs, wheel bolts, or wheel rim holes is known as the Pitch Circle Diameter (PCD). You won’t be able to put the wheels on your car without additional parts or a new wheel hub if the PCD of the wheel you want to buy does not match the PCD of your wheel hub.
Two Drilled Wheels Dual-drilled wheels are not universal, despite what some people may believe. Don’t be duped by salespeople or marketing; a ten-lug wheel won’t fit any car with five lugs. Dual drilled wheels are those with two PCDs or bolt patterns.
For instance, a dual-drilled wheel with the bolt patterns 5115 and 5120 will only fit on cars with those specific bolt patterns. Other bolt patterns will not accommodate these wheels.