Look inside your glove box for a sticker with the radio code; alternatively, consult the owner’s manual of your car on the sticker. The same credentials used for your Honda Navigation system will also be required for your Honda radio code, which has a specific serial number.
In This Article...
Where can I get my radio code?
People frequently ask drivers for their car radio codes. There is still a strong probability that the code can be located while still in the driver’s seat, even if you purchased an older used automobile.
First, try these locations:
- Dealership The solution might be kept by an authorized dealer. To establish that you are the vehicle’s owner, you’ll generally need to have your logbook or V5C paperwork on hand.
- Glovebox
- On a label in the glove compartment, there are some radio codes.
- site for the manufacturer
- You may find additional details on how to get the code on the manufacturer’s website. For assistance, you might be sent to a licensed dealer.
- former owner
- You might try contacting the prior owner if you purchased the car used. Check to see if they wrote down the code or saved an original copy.
- vehicle manual
- The code may be located under the sections on security or the stereo in your car’s owner’s manual. Alternatively, some codes can be located inside the manual on a small piece of paper or a plastic card.
Is the VIN number a source for radio codes?
Start by looking through the manufacturer’s documentation for the radio security code. Visit the manufacturer’s website and look for it there if it isn’t there. Visit your local dealership where you purchased your automobile or any other dealership of your manufacturer to have the problem rectified if the code isn’t available on the manufacturer’s website.
Simple reply: No. Long answer: When you request a radio code from your manufacturer’s website or dealership, the vehicle identification number, or VIN number, is necessary in order to obtain the code. The VIN is typically required to gain access to your radio codes.
How can I locate my Honda radio’s four-digit code?
4) Check your center console and glove box. In the glove box or center console of select Honda vehicles, you’ll discover a four- or five-digit number that indicates your Code or an eight-digit number that reflects your Serial Number.
Check Your Ownership Booklet
A card, an owner’s manual, and a maintenance manual were all included in a booklet if you purchased your Honda brand-new. Your Honda radio code is printed on the card. “Anti Theft Identification Card,” it states. Additionally, it is printed with the serial number of your radio. The NAVI code and serial number are present if your Honda supports navigation as well.
Look In and Around the Glove Box
Before you acquired ownership of your automobile, the dealership may have affixed a label with the radio code in the glove box. A five-digit number on a little white label is what you’re looking for. It could be positioned on the side or inside the glove box, only being visible when the glove box is opened.
Find the Radio Code Online
If your car or materials don’t have the Honda radio code, you can look it out online. The VIN number of your automobile and the serial number of your radio are the two things you’ll need. Both are required.
Go to the webpage for Honda Radio-NAVICode. Enter the radio serial number, your name, your VIN, and whether your car has two devices (meaning NAVI or not). You’ll receive the Honda radio code after clicking SUBMIT.
Enter the Radio Code
The radio code is quite easy to enter. The radio preset buttons are all connected to the five digits. A “C” appears when you dial the first number in the radio code. For the remaining numbers, repeat the process. O, D, then E will be called, and the radio will start playing on the last number.
How can I get my Honda radio unlocked?
Are the radio controls on your Honda Civic locked? If the car battery has been unplugged or jump-started, this frequently happens. The radio can usually be accessed again by simply pressing and holding the power button for a little period of time.
How can I obtain the radio code for my Honda before removing the battery?
The body of your radio unit bears the serial number of your radio. You must take the radio out of the dash to get to it. If you’re unclear of how to remove the radio correctly, check your owner’s manual or take your car to a mechanic. Damage to the radio and dashboard may result from improper radio removal.
You can get your radio code in one of three ways after you have your radio serial number:
To Access Your Honda Radio Code via Phone
Dial 1-800-999-1009 to reach Honda America Client Services. Your VIN number, radio serial number, and ownership documentation will need to be provided.
To Access Your Honda Radio Code from a Dealership
Bring your radio’s serial number and ownership documentation to your neighborhood Honda or Acura store.
Once you’ve located your radio code, note it down for any future uses as it won’t change.
Where in the Honda manual is the radio code?
Finding the Radio Code for Your Honda Civic Look in the glove box of your car. In this case, either the sticker or the sticker’s location in the owner’s handbook of your car will contain the radio code.
How can I reset the radio on my Honda?
These easy steps can help you find the radio’s serial number in your Honda. To record the serial number of your radio, make sure you have a pen and paper nearby. Alternatively, you can use the Notes app on your smartphone.
- The ignition should be turned on (ON or AUX), but the engine shouldn’t be started.
- Turn off the radio to ensure that CODE or ERR are not displayed on the screen.
- Press and hold the one (1) and six (6) buttons on your radio with one hand at the same time.
- Turn on the radio with your free hand while pressing the one and six radio buttons.
- An eight-digit serial number or two smaller serial numbers, which on older models might be separated by a dash, should be visible.
- Release the radio buttons, then write down or type the serial number into your mobile device or piece of paper.
Without the code, how do you reset the radio on a Honda Accord?
To obtain your radio code, follow the instructions below. If you are still unable to unlock your radio, visit your nearby Honda dealer for assistance or call Honda’s customer care department at 1-800-999-1009.
Why is my Honda asking for the Honda radio code?
When you replace the battery, your Honda will frequently ask for a radio code. The radio will request the code each time the battery is disconnected or becomes entirely dead. The radio will typically automatically reset and resume functioning properly if you simply press and hold the power button for two seconds. You won’t need to enter the code. You will need to enter the Radio Code if this doesn’t work.
How to retrieve the Honda radio code.
- The owner’s manual or glove box are the first places to seek for the radio code. The code is on a sticker that is typically adhered to or put inside the glove box. You may also stick it in the owner’s manual. The radio serial number will also be printed on this sticker. A rendering of what it will look like is on the left.
- You can also take it to your neighborhood Honda dealer, who will be able to take care of it for you, to recover the radio code.
- You may also look it up online using the link below if you can’t go to a Honda dealer.
Why won’t my car radio operate now that I’ve changed the battery?
The anti-theft “feature” that activates if battery power is taken from the radio is the most frequent cause of a car radio ceasing to function after the battery has entirely died. If that happens, all you need to do to get back on track is input the proper auto radio code.
How can I restart my automobile once the battery has been changed?
Just adhere to these simple instructions to reset your car: Take two to three minutes to unplug the battery cable. Start the vehicle after reconnecting the battery. To allow the engine control systems to detect any potential issues, drive the automobile for at least 10 kilometers.
After installing a new battery, how do you reset my Honda radio?
The radio in your car might not work properly after you replace the battery. Fortunately, after changing the battery, you can reset your Honda’s radio by following these instructions:
- Your radio ought to reset when you enter the code.
- To start the radio, turn the volume knob.
- Hold down the power button while waiting for the radio display to come on.
- You must enter your radio’s code, which may be found in your owner’s manual, if the Enter PIN message is displayed on it. The preset buttons on the radio can be used to enter the code.
- Turn off the radio once more after ten seconds.
- One click before to starting the engine, turn your key to the ON position.
These instructions ought to enable you to reset your Honda radio. However, if the radio is still giving you problems, consult your owner’s manual for more information or take it to a Honda dealer for a quick fix. Reset your radio while you’re at it, then use the Jerry app to save money on your auto insurance.
The Jerry app, a certified broker, assists users in saving $879 annually on auto insurance on average. Simply download the app, respond to a few few questions, and Jerry will send you free personalized quotations from more than 50 of the industry’s leading companies, including Progressive and Allstate.