The Honda B12 service is essentially just a routine inspection carried out by a Honda mechanic. The cost of the parts is roughly $80, and the labor cost is about $120 per hour. An experienced Honda mechanic can complete this task in 20 minutes, or maximum 30 minutes. A dealer will bill an hourly rate.
This service includes:
- visual fluid refills and checks (brake, tranny, windshield washer)
- air filter replacement
- Change the oil and oil filters.
- visual inspections of the brake pads and axle boots
- tire turning
- replace the cabin air filter
Within 30 minutes, the owner can easily complete the first three tasks. The air filter can be easily accessible and replaced if necessary (they don’t always need to be changed), and the cabin filter is located under the glove box. Although it takes a little longer to replace the oil, it can be done in 10 minutes.
Simply inspecting the wheels from below the car constitutes the axle boot examination. Rubber axle boots are often located where the rim is. They must be changed if they are torn. You definitely need a Honda mechanic at this point!
In This Article...
How is a Honda B12 cleared?
Every time one of the necessary maintenance tasks is finished, such as an oil change, tire rotation, air filter replacement, etc., your Honda Maintenance Minder light needs to be reset. Your maintenance reminder light shouldn’t need to be reset if you have your Honda serviced at a dealership. It should be done for you by the expert who completed your services. However, if you are performing your own maintenance on your Honda or if the technician neglected to reset the light for you, follow these easy steps to do it yourself.
Resting Honda Maintenance Minder Light
Depending on the vehicle, the light resets differently. Depending on the type of car you have, I’ll outline a few possible approaches.
st Method
The trip button is still present on several Honda vehicles, like the civic. This stalk protrudes from your dashboard and is typically used to select the information you wish to appear there or to reset your journeys. The only thing you need to utilize with this technique to turn off the maintenance reminder light is…
Release the trip button after it begins to flash, then press it once more. I’m done now. Now, the oil life ought to read 100%.
nd Method
On the lower right-hand side of the steering wheel of some Honda vehicles, there are up and down arrows with a reset button situated between them. These buttons are located on the steering wheel of some Honda SUVs, such as the Pilot. These are the only three buttons you will need to press when using this method.
In order to see the oil life percentage shown on the dash, press the down arrow button.
Hold down the reset button while waiting for the cancel or reset options to appear on the dash.
Press the up arrow to choose reset. Likewise, choose this option and press the reset button; the oil life should now read 100%.
rd Method
Any Honda trim model that has a touch screen and a home screen should be compatible with this technique.
You’ll be prompted with a screen that asks if you’re sure you want to reset it or not. Resetting should fix the issue. The oil life should read 100% and your maintenance minders should no longer be present.
Follow the link below for a list of maintenance minders and what they signify if you have a maintenance minder light on but are unsure of what it means.
What is the removal code for B12?
To turn the switch to ON, insert your key and turn the knob or click the Start button. Never start the car.
Using the Sel/Reset button, go through the vehicle information pages until you find the Oil Life page in the center of your instrument panel. Till the code flashes, hold down the Reset button. When the oil life gauge reads 100% and the alphanumeric code disappears, release your grip and press and hold the Reset button once again.
How can I reset the Code 12 on my Honda Civic?
Let’s assume that you completed all of the A12 code’s listed repair requirements. That’s fantastic. The dealership is not required to complete this for you. The vehicle still has to be informed that this has been completed in order for it to restart monitoring the miles and reset the oil life.
Depending on the model year and trim you have, some procedures may vary. In this video, we’ll go through the fundamental methods for resetting the maintenance reminder system. The Honda Civic from 2016 to 2018 can be serviced using this procedure; other models follow a similar procedure.
Take these actions:
- For roughly 10 seconds, keep the enter button depressed. The maintenance reset screen appears as a result, switching from the main screen.
- Double-click the start/stop button. This turns on the electricity system. The car doesn’t need to be fully started.
- A little button that allows you to page through the displays is located on the left side of the steering wheel. Continue doing this until the oil life display (if that’s what you changed) appears.
- To choose the one you want to reset, scroll through. Keep holding down the enter key. The necessary maintenance reminders are reset by doing this.
- Take note of the wrench, the maintenance reminders, and the listed code.
What does a Honda service B mean?
You might be thinking, “What is Honda B1 service? ” if the Maintenance Minder in your Honda car, SUV, or truck displays a Honda B1 service code. The number “1 indicates that a tire rotation is necessary, and the letter “B indicates that your car needs an oil change and a mechanical examination.
What does the Honda Accord’s 13b code mean?
If the Honda Civic displays the B13 code, it’s time to change the gearbox fluid and engine oil.
This number indicates that it’s time to replenish the transmission fluid and engine oil.
We can help if you’re looking for a solution to the problem that’s causing your Civic to display code B13. Here, we’ll discuss the value of transmission fluid as well as how to fix your car’s B13 error code. Finally, we’ll cover what other Civic owners have to say about their problems with this code and how you can find out more if you’re considering buying a Civic.
What does B1 (maintenance upcoming) mean?
Here it is: the definitive explanation of what the Honda B1 service message signifies. It serves as a safety reminder that you should change your oil, replace your oil filter, and rotate your tires. Don’t ignore this warning because doing so could seriously risk damaging your engine.
What is a Honda service B reset?
You must reset the Honda Maintenance Minder after taking care of your maintenance issues. Turn the ignition switch on, hold down the Select/Reset knob until the engine oil life indicator appears, and then hold it down once more for at least ten seconds. The maintenance item code and the indicator will then flicker. Press the knob again for five seconds after that. The engine oil life indicator will reset to 100% after the code disappears.
How can I reset the code on my Honda?
Put the vehicle in the auxiliary (not the start or run) position by turning the ignition switch or pressing the start button. PUSH AND HOLD COMBINEDLY WITH ONE HAND THE RADIO BUTTONS 1 AND 6. WITH YOUR FREE HAND, TURN ON THE RADIO WHILE CONTROLLING BUTTONS 1 AND 6.
Honda Maintenance Minder: Is it reliable?
On my Si, I haven’t changed the oil yet, however at 10k miles on my 2014 Accord, I did. It never ran into any issues. The maintenance reminder mechanism works well. Schedule the appointment once you are at 10%. The Honda technicians I spoke to claim that the factory-installed oil contains a particular additive and that you should never change it too soon. Other Honda technicians have also told me that is untrue. However, my dad always replaces the oil in his Hondas every 3,000 miles. He has never had problems, either, therefore I believe the owner is ultimately responsible.
What does Honda’s A2 service entail?
What Does the Service Code for the Honda A2 Mean? Another frequent code that appears when your engine oil, cabin air filter, engine air filter, or air cleaner element need to be changed is an A2 code.
How often should the brake fluid on a Honda be replaced?
For your brakes to be durable and dependable, changing your brake fluid is essential. The brake fluid in your Honda should be replaced, on average, every two to three years.
You should consult your owners manual for further information regarding brake fluid changes since every car has certain requirements. For instance, if you drive more than the average person, you might need to change the brake fluid more frequently.
But if you’re still unclear about how long you should go between changes, keep in mind that when it comes to car maintenance, it’s better to be safe than sorry. It is far preferable to change it a little too frequently than to wait too long.
Spend one more minute with Jerry to lower your auto insurance costs while you’re already learning more about brake fluid adjustments. The Jerry app, a certified broker, assists customers in saving an average of $879 annually on auto insurance. Simply download the app, respond to a few short questions, and Jerry will send you free personalized quotations from more than 50 of the industry’s leading companies, including Allstate and Nationwide.
B service: What does that mean?
Mercedes-Benz developed the Flexible Service System to address this issue and promote regular, suitable inspections and maintenance. This separates your maintenance requirements into service options A and B. The system will notify you whenever your car needs one, and after you bring it into the shop, it will instruct the mechanics what needs to be done. With Flexible Service, you can maintain the condition of your Mercedes while spending as little money as possible.
Service A
Depending on where you drive, how you manage the car, and other variables, you might need Service A less frequently. After its first year or 10,000 miles on the road, and then again after every two years or 20,000 miles, a Mercedes manufactured after 2009 often needs this service. Service A consists of:
- checking the brakes for issues with individual parts
- examining and adjusting tire pressure
- Resetting the service counter for the following visit A trip
- replacing the Mercedes-Benz motor oil and the vehicle’s oil filter
- examining and adjusting all fluid levels in accordance with manufacturing recommendations
Mercedes-Benz is cautious to consider the unique peculiarities of your vehicle when completing Service A. We determine the model and year of manufacture, get the pertinent service sheet, and do the necessary maintenance.
Service B
Similar to Service A, the requirement for Service B varies depending on the particulars of the vehicle. After the first year or 20,000 miles, and then every two years or 20,000 miles after that, it will be necessary for the majority of Mercedes models produced after 2009. Service B consists of:
- replacing the Mercedes-motor Benz’s oil and oil filter
- changing the cabin combined dust/filter
- replacing the brake fluid
- examining and making tire pressure corrections
- Resetting the maintenance counter in preparation for the next Service B visit
- checking the fluid levels and making any necessary adjustments as per the manufacturer’s recommendations