The most recent active and passive safety features, such as Honda’s Advanced Driver Assist System, or ADAS for short, are available for the new Honda Accord.
The Collision Mitigation Brake System (CMBS), which alerts the driver of an approaching collision and may potentially apply the brakes to lessen the impact, is a component of Honda’s Adaptive Cruise Control (ACC), Lane Keeping Assist System (LKAS), and ADAS.
The Adaptive Cruise Control system is controlled via buttons on the steering wheel, which also let you select your preferred speed and distance from the car in front. The ACC system monitors the distance to the vehicle in front using a radar in the front grille and has the ability to use up to 25% of the maximum braking force. The technology offers a visible and auditory warning if any additional braking is necessary. It can travel between 30 and 180 km/h.
The Lane Keeping Assist System, which is intended for dual carriageway or motorway use, aids you in maintaining control of your vehicle. A camera installed at the top of the windscreen allows the system to recognize the lane lines. It will go into standby mode if you indicate, but if it detects that you are about to leave your lane without signaling, it will immediately apply corrective steering and sound an audio and visual warning.
Up to 80% of the necessary steering force is applied by the system, with the remaining 20% coming from the driver. Honda’s Advanced Driver Assist System is intended to support the driver, not take the place of them, as the name suggests.
You will always be in control of your new Accord thanks to the Lane Keeping Assist System, Adaptive Cruise Control, and Collision Mitigation Brake System, which all significantly contribute to active safety and lessen driver fatigue.
In This Article...
What does the Honda Accord’s ACC stand for?
When a vehicle is spotted up ahead, Adaptive Cruise Control (ACC)13 maintains speed and the following distance. Additionally, the Low-Speed Follow feature makes it simpler to navigate stop-and-go traffic.
The Aspect:
With Adaptive Cruise Control (ACC)12, the driver can specify a preferred speed much like with a traditional cruise-control system. However, ACC goes a step further by enabling the driver to select a desired speed and the distance to follow a vehicle that is identified in front of them.
- The driver is prompted to choose a short, medium, or long following distance behind a vehicle that is identified in front of them while using adaptive cruise control.
- There is even more utility added by the Low-Speed Follow capability.
- To maintain the chosen following interval, ACC then adjusts the throttle and, if necessary, moderately brakes the vehicle.
- The Accord Hybrid will resume moving up to the previously set speed of the ACC system as soon as the driver pushes the cruise-control toggle switch toward RES/+ or steps on the gas.
- The Accord may be stopped automatically by ACC when the previously identified vehicle slows down or stops.
How do I disable ACC Lkas?
Awaiting the appearance of LKAS on the multi-information display, press the MAIN button on the steering wheel. Click LKAS. The display will show the outline of the lanes (dotted lines turn solid when the system is ready). To shut off the system, press either the MAIN or LKAS button.
When the LKAS light turns on, what does that mean?
Only when lane drift is discovered without a turn signal in use will the LKAS notify you. The steering wheel vibrates quickly, and a warning display warns you when the car veers off the identified lane.
What does ACC signify on the Honda dashboard?
A car ahead of you is identified by adaptive cruise control (ACC) with low speed follow (ACC with LSF), which assists in maintaining a consistent vehicle speed and a predetermined following distance. At speeds more than 25 mph (40 km/h) and up to 90 mph (145 km/h), ACC with LSF is effective.
How can the ACC be disabled on a Honda Accord?
The Driver Information Interface shows cruise mode. To return to ACC, press and hold the Interval button once more. To deactivate ACC, press the MAIN button. Indicator for ACC will turn off.
The ACC light’s meaning:
The adaptive cruise control (ACC) indicator light senses the distance of the automobile in front of you, keeping your vehicle moving at a safe speed.
Honda Sensing is on all the time.
Collision Mitigation Braking System (CMBS) usage guidelines:
- Activate the safety support switch.
- Select the CMBS symbol by moving the left selector wheel to it. A beep is heard, and the multi-information display shows a message. When the system is turned off, the CMBS indication is visible.
- The LKAS will appear on the multi-information screen when you press the primary button on the right side of the steering wheel. On the right side of the steering wheel, press the LKAS button. The multi-information screen will display a dotted road outline once the button is touched. I’m done now. LKAS is now active. The system is turned on when the road lines on the multi-information screen solidify. When the lines are outlined, it is not engaged because the vehicle cannot detect the road lines because of bad weather or poor road conditions.
Adaptive Cruise Control (ACC) usage instructions:
- Press the ACC indication and the Main button on the right side of the steering wheel.
- Once you’ve reached the desired speed, release the gas pedal and push the set button.
- Simply use the plus and minus buttons on the steering wheel to change the speed.
- Press the interval button to change the next distance. By pressing the interval button, you can cycle through the extra long, long, moderate, and short distances.
I’m done now. ACC is now active. Now under cruise control, maintain a safe distance from the cars in front of you.
Push the RDM symbol after moving the left selection switch there.
All that needs to be done is that. The technology to mitigate road departure is now activated.
There is no need to do anything to turn on or off Traffic Signal Recognition because it is always on. The driver information interface and the head-up display serve to remind you of information on road signs, such as the current speed limit, that your car has just passed.
What does “ACC” on my automobile mean?
An active safety technology called adaptive cruise control (ACC) automatically regulates a vehicle’s acceleration and braking. It is started by pressing a button on the steering wheel, and it is stopped by the driver braking or by pressing another button.
Even the most ardent vehicle lovers have trips they would prefer to be driven through, or at the very least assisted in a way that would allow them to unwind behind the wheel after a demanding day. Even better if doing so makes their driving experience safer and more exciting while conserving gasoline. Fundamentally, this is the driving force underlying cruise control technology. Even though it has been around for two decades, cruise control use is still increasing and helps drivers at more and more points along the way.
The acceleration and braking of a vehicle are automatically controlled by adaptive cruise control.
Can steering be affected by lane assist?
Modern vehicles are loaded with high-tech driver assistance systems, but it can be difficult to understand how they work and whether they are actually worth the money.
Many contemporary cars come with lane assist, which, as the name implies, assists you in keeping your car in its lane. Drivers who are drowsy or momentarily preoccupied and drift out of their lane cause many accidents on open roads.
When a driver inadvertently drifts out of their lane, lane assist systems monitor the car’s position on the road, identify the situation, and take action by issuing warnings or actively directing the vehicle back into its lane.
How do I resolve the Honda sensing issue?
Honda Sensing is a terrific way to keep safe while driving even though it initially seems a little confusing. Press and hold the MAIN button on your steering wheel to reset Honda Sensing while you’re driving. This will turn off all Sensing features, including adaptive cruise control, lane watch, the blind spot information system, and any other features that are currently engaged in your car while you’re driving.
You can reset some functions of Honda Sensing while maintaining others. For instance, the adaptive cruise control feature itself can be reset. Simply push and hold the interval button—which is identified by a car with four bars behind it—until the instrument screen displays Cruise Mode Selected. To restart the system, press and hold the interval button a last time.
Why not use the Jerry app to discover more about your insurance options as you’re learning more about your car? Simply download the app and respond to a few short questions to get a lengthy list of quotes that are tailored just for you. The typical user saves $879 yearly.
How does Honda ACC work?
What is the Honda Adaptive Cruise Control used for?
- Your steering wheel’s MAIN button should be pressed.
- The instrument panel will display ACC and LKAS (Lane Keeping Assist).
- You can select your cruising speed when traveling at speeds under 25 mph or even when the car is stopped and the brake pedal is depressed.
Can you turn off the adaptive cruise control?
You can: Press the brake pedal to turn off adaptive cruise control. Select CANCEL from the menu. Press the ON/OFF button for the cruise control.
How does the lane keep assist function in a Honda Accord?
How do I activate the Honda Lane Keeping Assist feature?
- On the right side of your steering wheel, press the MAIN button.
- Hit the LKAS button (pictured).
- The instrument panel will display lane outlines to show that the LKAS is engaged.
How do I off my Honda sensing permanently?
Can Honda Sensing be turned off? Yes, if you choose, you can disable the Honda Sensing features. Press the button beneath ECON to disable RDM. By pressing the MAIN button on the steering wheel, LKAS can be turned off.