With the VTEC (Variable Valve Timing & Lift Electronic Control) technology, the engine computer switches between several camshaft profiles for low- and high-end performance.
In This Article...
Does VTEC increase a car’s speed?
Honda created the Variable Valve Timing & Lift Electronic Control (VTEC) technology to improve the overall performance, efficiency, and fun factor of their vehicles. The technology has become a well-known meme as a result of its frequent use in Fast and Furious movies. Few people are aware of the mechanics behind the expression “VTEC just kicked in, yo!” What you need to know about the system is provided here.
A turbo engine is the Honda I VTEC.
Under any circumstance, from city driving with frequent stopping and starting to highway travel, the VTEC TURBO engine is fuel-efficient. A 2.4L normally aspirated engine has a lot of torque for city driving due of its size. Due to its turbo, the VTEC TURBO engine has higher torque than the 2.4L normally aspirated engine. A 1.5L engine may perform on par with a 2.4L engine thanks to the VTEC TURBO technology.
Summary
Utilizing a turbocharger, direct injection system, and variable valve timing mechanism, Honda’s VTEC TURBO technology efficiently utilises every last drop of fuel.
Honda aims to mix driving pleasure with environmental performance with VTEC TURBO and hybrid technologies.
Turbo or VTEC, which is faster?
While VTEC is more focused on extracting the maximum amount of horsepower from the engine because torque on VTEC cars can only be felt on the VTEC range, which is anyplace after 5,500RPMs, the torque produced by a turbo is still negligible in comparison.
VTEC vs i-VTEC: Which is superior?
Honda added i-VTEC, which effectively stands for Intelligent VTEC, for you if variable valve timing wasn’t hard enough before. Since its introduction in Honda vehicles in 2001, almost all of their performance engines have utilised it.
The above-mentioned architecture is used in conventional VTEC engines. Only the lift and duration offered by the two distinct camshaft lobes or profiles can be controlled by this technique. In order to have better control over valve timing, Honda created and combined what is known as i-VTEC, or VTC with VTEC.
Variable timing control (VTC) allows the camshaft to be advanced or retracted in order to manage valve overlap. The exhaust valve never opened and closed simultaneously in conventional VTEC engines because the intake valve always opened first. With VTC, the camshaft lobe angles can be adjusted to allow the valves to overlap or open simultaneously. It can be altered at various RPM levels due to its changeable nature.
So, What’s the Difference Between VTEC and i-VTEC?
By allowing for camshaft angle modifications, i-VTEC adds more valve timing control. The valves must open and close differently for each RPM range in order to operate at their peak performance at both low and high RPMs. The main distinction between VTEC and i-VTEC is that the former does this.
In contrast to the conventional VTEC, i-VTEC offers a smoother power band and improved performance at both high and low RPMs.
Honda stopped utilizing VTEC when?
The 2017 Honda Civic Si will include a turbocharged engine, which is a first for the trim, and will go on sale next month for around $20,000. The 1.5-liter engine has the same 205 horsepower as the old 2.4-liter four with naturally aspirated gas. However, compared to the normally aspirated engine, torque is up 18 lb-ft to 192. The Civic Si should be enjoyable to drive because it has more power accessible lower in the rpm range and a standard six-speed manual transmission.
A sport-tuned suspension with firmer springs and antiroll bars helps to improve car control. Honda claims the new Si is substantially lighter than the previous version (without providing details). A two-mode adaptive damper system (sport and normal), a limited-slip differential, and larger 12.3-inch front brake rotors are all included as standard equipment.
The coupe and sedan both feature subdued design (at least compared to the Type R). The Si gets wider side vents at the back, black trim on the front fascia, 18-inch, 10-spoke wheels, and center-exit exhaust. No flashy body kits or extraneous wings are present.
It will be interesting to see how the 2017 Civic Si stacks up against rivals like the Ford Focus ST, Subaru Impreza WRX, and Volkswagen Golf GTI. With starting costs in the mid-$20,000 range and greater power than the Si, the competition may damage Honda’s new Si. Alternately, the Si could triumph despite lacking VTEC. As soon as we can get behind the wheel, we’ll let you know.
What VTEC engine is the best?
The B18C6 is one of the best-rated Honda VTEC engines. This 1.8L 4-cylinder engine was installed in Honda Integra and Acura Integra Type R models sold worldwide from 1999 to 2001. For a car that was so light, its 195 horsepower and 130 pound-feet of torque were excellent. Additionally, it had a redline of 8400 RPM, while VTEC began to operate at 5700 RPM.
Because it was simple to alter and had that distinctive DOHC VTEC sound when you approached the VTEC engagement point, the B18C platform rose to great popularity. This results in a lot of power in the higher RPM ranges, making the cars they are in feel sportier and more enjoyable.
The B18C is still recognized as one of the best VTEC motors ever made, and it continues to be in high demand all over the world. If you’re looking for an excellent, low-mileage B18C, be prepared to pay more.
When does the VTEC start working?
In 3-Stage VTEC, the timing and lift of the intake valves are managed by three separate cam profiles. Since there isn’t much room in this version of VTEC because it was built around a SOHC valve head, it can only change how the intake valves open and close. In this application, conventional VTEC performance and low-end VTEC-E fuel economy advantages are combined. In 12-valve mode, which is used between idle and 2500–3000 RPM depending on the load, one intake valve fully opens while the other very minimally does so to avoid fuel from accumulating behind the valve. This 12 Valve mode causes the intake charge to swirl, improving low end performance and fuel economy by increasing combustion efficiency. Depending on the load, one of the VTEC solenoids engages at 3000–5400 RPM, causing the second valve to lock onto the camshaft lobe of the first valve. This technique, also known as 16-valve mode, mimics a typical engine operating mode and enhances the mid-range power curve. Both VTEC solenoids are now engaged at 5500–7000 RPM, causing both intake valves to use the middle portion of the camshaft. Peak power is produced at the highest end of the RPM range by the third lobe, which is optimized for high performance.
In a more recent version of 3-Stage i-VTEC, VTC and PGM-FI were merged to allow the ECU to regulate the whole spectrum of modes and archive higher performance and fuel economy advantages. The Honda CR-Z can continuously transition between low-end and standard modes between 1000 and 2250 rpm and engage high cam mode from 2250 rpm and above on SOHC.
What makes Honda VTEC so unique?
In essence, the VTEC system blends high-RPM performance with low-RPM fuel efficiency and stability. Additionally, the changeover happens smoothly, enabling consistent performance across the entire powerband. The engine computer manages the switching process between the two cam lobes.
Which automobiles feature VTEC?
The 1.8-liter engine in the HR-V, however, uses VTEC to regulate the timing of both intake valves at higher speeds and one intake valve at lower speeds, but not lift.
Although the intake and exhaust valves in Honda’s turbocharged four-cylinder engines have variable valve timing, the lift valves do not. According to Honda, this variation of VTEC controls the intake and exhaust camshafts separately, enabling valve timing to be adjusted for a range of driving circumstances. The Accord, Civic, Civic Si and Type R, and CR-V all employ this technology.
The Odyssey, Passport, Pilot, and Ridgeline’s V-6 engines have variable intake valve lift and timing, and VTEC combines with cylinder deactivation to function in a three-cylinder mode.
Is VTEC similar to Turbo?
The term “analog” describes turbochargers. They offer varying degrees of boost, from none to full boost. When exhaust gases are passing through a turbocharger, which happens whenever an engine is operating, the turbocharger is always active. According to the position of the wastegate and the rate at which exhaust gases are passing through it, it produces boost linearly. In contrast to VTEC, a turbocharger delivers varied quantities of boost across a large RPM range rather than abruptly “kicking in” at a specific RPM.
A “digital” device is VTEC. At the engagement point, there is a sharp transition and change in engine performance and sound because it is either on or off. Depending on the model and if the intake and exhaust systems have been adjusted, the degree of VTEC engagement can be felt or heard varies. If I’m paying careful attention, I can feel and hear it engage at 5,500 RPM in my standard Ridgeline.
Imagine turbochargers as a lamp with a dimmer control; the light can be anywhere from off to full brightness.
Consider VTEC as a light that has a straightforward on/off switch. The light has only two settings: off and full brightness.
Does VTEC exist on every Honda engine?
If you have any interest in high-performance vehicles, particularly those made in Japan, you’ve probably heard of Honda’s powerful VTEC engine. The primary source of Honda’s renown is this. Although VTEC has continued on turbocharged Honda engines like the current Type R Civic, it is their four (and six) cylinder normally aspirated engines’ ace in the hole. VTEC has the ability to improve performance, boost economy, and cut emissions. Honda has successfully employed it for all three of these objectives over the years. Are all Hondas VTEC, though? You’ll get the solution to that question in this article.
VTEC has also influenced the development of the “VTEC Just Kicked In Yo” meme genre on the Internet:
But what precisely is VTEC? How is better performance achieved? Does every Honda have VTEC, too? These questions and more will be addressed in this installment of Car Facts.
VTEC is almost universally found in modern Honda models, but it wasn’t always this way. Not a single Honda vehicle had it a little over 30 years ago. Honda gradually integrated it across its whole lineup after first keeping it for performance vehicles. To discover more about what VTEC does, which Hondas have it, and why, let’s take a closer look at how it functions.
Why does VTEC malfunction?
If there’s a problem with your VTEC solenoid, it’s likely to result in your car running in limp mode with less power than usual and perhaps even unable to exceed 3,000 rpm.
Despite the fact that some drivers may be concerned that they would certainly face a big repair fee, this is luckily not the case.
While a leaking gasket may occasionally be the source of the problem, we’ve heard of numerous owners who took the time and trouble to disassemble the solenoid and replace the gaskets only to have the solenoid malfunction shortly after.
We would personally advise choosing a straight swap with a new unit because of this and the small price difference between the two.
The rarer VTEC solenoid used in these models is significantly more expensive than those normally found in vehicles like the Civic, Accord, and CR-V, thus owners of Honda S2000s are likely to feel the sting a little more.
In this situation, it could be worth trying the gasket kit first to see whether it fixes the leaky solenoid issue with the evident gasket issue, but be ready to put in extra work and possibly replace the solenoid soon after.
We always advise that you use extra caution while removing the bolts and make sure that both of the mating surfaces are clear of impurities and debris when it comes to re-fitting, regardless of whether you choose to replace the gasket or the solenoid fully.
We always strongly advise keeping up with your regular oil changes after you’ve replaced your solenoid or gasket to ensure optimal life from your engine and VVT solenoid.
In addition to numerous other problems, neglecting routine maintenance frequently results in clogged oil containing debris that might eventually clog the passageway to the solenoid.
Although it isn’t always the case, infrequent oil changes and letting the oil level drop too low are frequent reasons for VTEC solenoid failure, thus we think routine maintenance and inspections are essential to guarantee a healthy engine and VTEC.