You might be curious to know what a VSA light is. VSA, or vehicle stability assist, is a computer technology from Honda that works to make sure the tires have grip so you can stay on the road.
When both the check engine light and the VSA light are on, the computer has likely identified a potential systemic malfunction.
In This Article...
Different sized tires
Your VSA will be aware if one or more of your tires are not rotating at the appropriate speed. The caution light turns on! Make sure you heed the advice in your car’s owner’s manual; Honda suggests a tire size for a reason.
Something went wrong in the engine
Many Hondas will also turn off the VSA if something is wrong with the overall engine system. The warning light will consequently naturally begin flashing.
If your dashboard is lit up, you probably have an other problem, such as an engine problem, and your car is just letting you know that the VSA has been temporarily disabled until the engine is serviced and the code is cleared.
VSA system is broken
Although they are rare, VSA system problems can occur. Therefore, if your indicator light is still on after ruling out all other possibilities, there might be a problem with the VSA.
The best course of action is to schedule a servicing as soon as possible with your favorite mechanic. You definitely don’t want the problem to worsen.
You turned VSA off by accident
Finally, it’s possible that you unintentionally turned off your VSA. There is a manual button that you can push to disable the Vehicle Stability Assist function in older vehicles.
For instance, the button is located on the center dash, above knee level, down to the left of the steering wheel on the 2006 Honda Accord.
The dashboard warning light has started to blink because if you bump or brush the button, you can wind up turning it off.
How is the VSA light fixed?
The traction control system is comparable to vehicle stability assist. It prevents the car from spinning out or veering off track. The sensors within the car that make up VSA measure how quickly your wheels are rotating.
If you’re traveling too fast for the conditions, the ECU will decide whether to cut off the engine’s power, apply the brakes selectively, or do both.
On your Honda Accord, you can increase wheel spin while retaining the ability to brake selectively by disabling the VSA. However, it is not advised to do this when it is raining since you risk losing control of your vehicle or hydroplaning, which occurs when your tires are being exposed to too much water while travelling quickly.
Only if you’re having trouble climbing a hill due to wheel spin or if you ever get trapped on ice and need a little extra power to get out of it will you need to turn off the VSA on your Honda Accord. Turn the vehicle stability assist back on once you’ve fixed the problem.
By pressing and holding the VSA button in this circumstance, your Honda Accord’s VSA can be turned off. Normally, the VSA button can be found under the left vent next to the steering wheel. Hold down the button until a beep is heard and the dash’s “VSA OFF” light indicator appears.
What does it imply if the VSA light is on indefinitely?
The light is there to alert you that you have turned it off if you bump, brush, or bump the button. Aim to press the button. If this was the trigger for turning it on, it will switch off again.
When something goes wrong with the general engine system in many Hondas, the car also turns off VSA. Then the caution light appears. If many lights are on, it is probably not a VSA problem; instead, the car is letting you know that it temporarily disabled VSA until you fix the engine and clear the codes.
Your Honda is keeping an eye on the rotation of your wheels while also keeping track of how long it takes them to complete one rotation. The VSA system will be aware if one or more tires are not rotating at the proper speed. As the light turns on. About a dozen times in its manual, Honda warns you against fitting wheels and tires of a size other than the ones the car arrived with. If you did, the VSA light will turn on to let you know. Why on earth would you alter the dimensions of your Honda’s wheels and tires? Engineers with extensive education and training selected the ideal size for your car. Reinstall the proper wheels and tires.
We talked to Mark McMullen, a Millis, Massachusetts, mechanic at G&M Services who has worked on Hondas for many years. Mark claims that he hardly ever encounters a Honda with a VSA problem. Although usually for one of the aforementioned three reasons, he does have customers that have the light on. Start at the top and work your way down if yours is on. If you are unsuccessful, there might be an issue with this system. It has to be serviced as soon as is practical. You don’t want to be without your Honda’s VSA system because it could save your life.
Can I drive with my VSA light on?
While you are driving, if the VSA warning light illuminates and remains on, there might be a problem with the system. While the VSA warning light is on, you can still drive because your braking and cornering abilities will be normal without the stability benefits the VSA System offers.
How much does a VSA system repair cost?
The VSA system repair typically costs between $80 and $90. The average price for Honda is this amount. With labor expenses ranging from $38 to $48 and parts costing about $43,
Author: DJ
Automotive technician Dave Junior has practical experience servicing, diagnosing, and repairing both domestic and foreign vehicles. He takes pleasure in writing and disseminating his knowledge.
Is traction control and VSA the same thing?
Electronic Stability Control is the general term used to describe the VSA system’s primary purpose (ESC). The system also has traction control capabilities. On the driver’s side control panel, this button is located. Press and hold it until you hear a beep to partially disable VSA functionality/features.
In your car, what does VSA stand for?
If the vehicle rotates more or less than expected during a corner, VSA aids in stabilizing the vehicle. Additionally, it helps you keep traction on slick conditions. It accomplishes this by modulating engine output and applying the brakes only when necessary.
If the tyre type and size are combined, the VSA may not operate as intended. Use the recommended air pressures and the same kind and size of tire.
There can be an issue with the system if the VSA indicator illuminates and remains illuminated while driving. Although it might not affect regular driving, you should nonetheless have your car checked out by a dealer right away.
VSA is unable to improve stability in all driving circumstances and does not have complete control over the braking system. You still need to maintain a sufficient margin of safety while driving and turning at speeds adequate for the road conditions.
Your car will be able to brake and turn normally when the button is depressed, but VSA traction and stability enhancement will be less effective.
When your car becomes stuck in shallow mud or new snow due to certain uncommon circumstances, it could be simpler to release it if the VSA is temporarily turned off.
The traction control feature is less effective when the button is pressed. The wheels can now spin more freely at low speeds as a result. If you are unable to release your car while the VSA is on, you should only try to do so with the VSA turned off.
Make sure to turn VSA back on right away after you’ve freed your car. Driving your vehicle while the VSA system is off is not something we advise.
While doing system checks right away after starting the engine or while driving, you could hear a motor sound coming from the engine compartment. That is typical.
What does the triangle in a Honda with the exclamation point mean?
You’re not the only one who has ever been taken aback by an unexpected alert on your dashboard while waiting for a servicing appointment or driving. Although these lights might be frightening for any motorist, especially if you don’t know what they signify, our Fort Worth area Honda dealer is always available to assist.
If you notice a small triangle on the dashboard of your Honda car with an exclamation point in the center, there is an easy explanation. A malfunction with the Vehicle Stability Assist system in your Honda vehicle is indicated by this warning light, which also serves as the system’s emblem.
If your vehicle turns a little more or less than you would like while cornering, the Vehicle Stability Assist technology helps to steady your Honda. By controlling your car’s engine output and applying the brakes only when necessary, it can even help you maintain traction while accelerating on slick or sloppy road surfaces.
How is a VSA fuse removed?
The lid can be removed from the side hinges by opening the bottom and dragging it in your direction. On the passenger side of the dashboard, beneath the interior fuse box, is the VSA fuse box. Push the tab and raise the left side of the lid as shown to open it.
How much does a Honda Accord VSA module replacement cost?
A replacement ABS control module for a Honda Accord costs, on average, between $1,082 and $1,092. While parts are priced at $1,044, labor costs are expected to be between $38 and $48.
Where can I find updated VSA modules?
To update the VSA modulator-control unit, choose the update mode and follow the on-screen instructions. 2. Disconnect the HDS/HIM/GNA600 from the DLC if the VSA modulator-control unit’s software is the most recent version. Follow the directions on the screen if the VSA modulator-control unit’s software is not the most recent.