Oh no! The SRS airbag light on your Honda Civic LX may signify a problem with the airbags, seat belt sensors, or seat belt pretensioners that are part of your supplemental restraint system.
To make sure there are no problems with your safety system, check with a Honda dealer or licensed repair before you start unplugging anything to reset your SRS light. Even though dashboard lights occasionally turn on without cause, it is always preferable to have them checked out first. A Honda dealer can fix problems and provide a free diagnostic check to be sure nothing major is wrong.
While you try to figure out why your Honda Civic’s airbag light is on, Jerry can make sure you have the finest protection for both you and your vehicle. The Jerry app compares tailored rates from more than 50 of the country’s top insurers, including Nationwide and Allstate, in a matter of seconds. The typical user of Jerry saves $879 annually on auto insurance!
In This Article...
Drive while the SRS light is on?
One should not ignore the airbag light or the SRS warning when they appear. It doesn’t necessary imply that the vehicle is unsafe to operate, but doing so is risky and akin to playing with fire. When this light is on, it indicates that your safety system isn’t functioning properly and, in some situations, that your airbags aren’t functional and won’t deploy in a collision.
Can I drive safely with my SRS light on? The answer is negative, as there is a significant risk if an accident were to occur, even if it is possible that the airbags may still deploy with the light on. We advise having a specialist examine it and identify the problem so that it may be corrected right away.
What would activate the SRS light?
Your car’s internal computer has disabled the airbags if the SRS (Supplemental Restraint System) indicator remains illuminated. This indicates that there is a problem with the airbags. Although your airbags won’t deploy at random, they might not in the event of an accident, therefore it’s crucial to locate the issue and have it fixed by a qualified repair.
Your car’s SRS light will come on for around 6-7 seconds when you turn the key, then go out if it detects no abnormalities. You may have an issue with the airbags itself, a loose wire, a broken seat belt buckle, or an issue with the Engine Control Unit (ECU) if the SRS light remains on or starts flashing intermittently. To get you back on the road safely, our mechanics at My Auto Solutions in Buford, Georgia, provide airbag module reset, removal, and installation services.
How much does a Honda Civic SRS light repair cost?
Cost estimation for the replacement of the occupant sensor in a Honda Civic. A replacement air bag occupant sensor for a Honda Civic costs, on average, between $974 and $999. While parts are priced at $878, labor costs are predicted to range between $96 and $121.
How do I turn off the SRS light?
The airbag light connects the seat belt system and the airbag system as part of the Supplement Restraint System (SRS) in automobiles (and vice-versa). When you turn on your automobile, the airbag light comes on for around seven seconds before going out, signifying that the internal system check was successful and finished. When the airbag light either never turns on or stays on while blinking, an issue exists. The airbag light needs to be reset at this stage.
Examining seat belt components, fixing bad clock springs, and replacing faulty sensors are a few techniques for turning off an airbag light. New bulbs or a fully charged battery are other options. While most repairs can be done without a professional, others may.
The following 10 steps will reset your airbag light:
- Turn on and off your ignition.
- Test drive your car when it has been restarted.
- Check the airbag switch for the passenger.
- Check to see if the seat belts are in place and functioning properly.
- Check to see if the passenger seat sensor is off.
- Use a scanner with the ability to reset the SRS or airbag light.
- Fix the broken airbag sensors.
- Replace or repair a broken clock spring.
- Check to see if the airbag is working properly.
- seek for a specialist’s help.
Although not exhaustive, the list above includes tried-and-true methods for tackling the problem. Some of them might not apply to your vehicle because compatibility is always based on the year, make, and model. It is recommended that you have your service manual on hand when carrying out any of these fixes. Always follow the manufacturer’s recommendations, too. Let’s get started on resetting your airbag light right away.
What is the price of replacing an airbag sensor?
Depending on the automobile model and labor charges, the cost to replace an airbag sensor ranges from $100 to $600. A sensor for an airbag costs between $50 and $300, as does the labor.
Both the airbag sensor and its replacement are delicate parts. Even for an expert, correctly diagnosing and installing the airbag sensor can take up to two hours.
The airbag sensor itself is typically not very expensive; you may anticipate paying between $50 and $300 for a brand-new one. Never purchase aftermarket sensors; don’t take the chance. Always purchase OEM original, authentic items.
You can save money by replacing the airbag sensor yourself if you are highly confident working on cars and meticulously following the repair manual.
If you have even the least qualms regarding the replacement, have a pro handle it.
Keep in mind that it is a crucial component, therefore installing it properly is important in case of an accident. Additionally, if you make a mistake, there is a chance that all of the airbags in the car will deploy, which will cost thousands of dollars to fix.
What does it cost to repair the airbag light?
Reset Airbag Light, at No. 1 This procedure typically takes several hours and costs a few hundred dollars, though depending on the car, it might cost as much as $600.
How is SRS fixed?
The SRS light might illuminate for a variety of reasons. Utilizing a diagnostic scan tool is the simplest way to identify any SRS or airbag system issues.
The SRS light’s most frequent reasons are listed below:
Seat Belt Latch Failure
Sensors in the SRS keep track of when the seat belts are buckled. The connection may be hampered if anything has gotten within the buckle.
Remove any foreign things from the seat belt buckle to solve the issue. Spray some compressed air into the buckle if you don’t see anything.
Defective Passenger Seat Occupancy Sensor
There is a sensor that warns the SRS system if someone is seated in the front seat. It reads weight in addition to alerting the sensor when someone is nearby.
The passenger airbag will be ready to protect the occupant if there is an adult in the seat. However, if the sensor is malfunctioning, the SRS light may turn on.
Corrosion
Corrosion within your vehicle due to water damage can develop quickly. This might be disastrous if it happens among the SRS parts. It may not only result in the warning light turning on, but it may also have an impact on how well the system works.
Corrosion must be extensively inspected in all of the components if this issue is to be resolved. Everything that has been impacted must be replaced.
Bad Clockspring
The steering wheel contains this electrical connector. Its major job is to keep the SRS computer and the wheel connected when the wheel is rotating.
However, a lot of hate is frequently directed towards this section. The driver’s side airbag might not inflate in an accident if it stops operating. The SRS light will also give you a warning to let you know what is going on.
Dead SRS Computer Battery Backup
In order to store the data it receives, the SRS computer needs a backup battery. When the engine is off, the battery still functions.
The SRS light may turn on if the battery is running low or dead. The installation of a new battery is the sole solution to this problem.
Previous Accident
After an accident, if the airbags did not deploy, your SRS light can turn on. The system was most likely activated during a collision by the crash sensors.
But if something went wrong and your airbags failed, a fault signal would be transmitted to the computer. As a result, the computer needs to be reset, as indicated by the SRS light.
Faulty SRS Computer
All electrical parts degrade with time. The SRS computer is susceptible to failure just like any other computer. Its demise may be caused by heat, severe vibration, aging, and water damage.
The only fix for a dead computer that causes the SRS light to illuminate is a replacement.
SRS malfunction: what is it?
Have you ever seen a “SRS” light flash on your dashboard? Few Mercedes owners are aware of what this light signifies. Actually, its full name is Supplement Restraint System. This applies to things like airbags and your safety belts. Your airbags might not deploy in an accident if your SRS is malfunctioning. You can see why; it’s crucial to make sure these things are in good operating order!
- car on loan with extensive repairs
- the most recent diagnostic technology
- a three-year, 36,000-mile warranty
- master certified technicians for Mercedes-Benz
Our staff members are genuine Mercedes enthusiasts, and they will handle your car as if it were their own. Come and enjoy European auto repair with a personal touch, we cordially invite you.
Can the airbag light be reset without a tool?
Without a scanner, most automobile models make it difficult to reset the airbag light. This is a safety warning since, when the airbag light appeared, you should always fix the problem. Fortunately, if you fix the issue, the airbag light will typically also turn off by itself in many automobile models.
However, in some older vehicles, the airbag light can be reset without a scanner by disconnecting the battery wires.
Make that there are no loose wires or rust in the connector plugs in the wiring system under the driver’s or passenger’s seat. Restart your car after spraying an electronic cleaner on the connecting plugs.
If you can’t detect any issues there, you should really invest in an OBD2 scanner or have a shop interpret the codes because otherwise you’ll have to guess what the issue is.