The Supplemental Restraint System (SRS) Warning Light will illuminate if the system fails to function as intended or does so improperly, according to the onboard computer of the vehicle. When the computer determines the automobile has been in an accident, this system is intended to deploy air bags and tighten seat belts. To reduce the risk of fire, the battery is usually removed and the gasoline pump is usually turned off in newer makes and models. Every time the automobile is turned on, the computer immediately checks the system’s status due to its significance.
In This Article...
Drive while the SRS light is on?
One should not ignore the airbag light or the SRS warning when they appear. It doesn’t necessary imply that the vehicle is unsafe to operate, but doing so is risky and akin to playing with fire. When this light is on, it indicates that your safety system isn’t functioning properly and, in some situations, that your airbags aren’t functional and won’t deploy in a collision.
Can I drive safely with my SRS light on? The answer is negative, as there is a significant risk if an accident were to occur, even if it is possible that the airbags may still deploy with the light on. We advise having a specialist examine it and identify the problem so that it may be corrected right away.
What could turn on the SRS light?
The SRS light might illuminate for a variety of reasons. Utilizing a diagnostic scan tool is the simplest way to identify any SRS or airbag system issues.
The SRS light’s most frequent reasons are listed below:
Seat Belt Latch Failure
Sensors in the SRS keep track of when the seat belts are buckled. The connection may be hampered if anything has gotten within the buckle.
Remove any foreign things from the seat belt buckle to solve the issue. Spray some compressed air into the buckle if you don’t see anything.
Defective Passenger Seat Occupancy Sensor
There is a sensor that warns the SRS system if someone is seated in the front seat. It reads weight in addition to alerting the sensor when someone is nearby.
The passenger airbag will be ready to protect the occupant if there is an adult in the seat. However, if the sensor is malfunctioning, the SRS light may turn on.
Corrosion
Corrosion within your vehicle due to water damage can develop quickly. This might be disastrous if it happens among the SRS parts. It may not only result in the warning light turning on, but it may also have an impact on how well the system works.
Corrosion must be extensively inspected in all of the components if this issue is to be resolved. Everything that has been impacted must be replaced.
Bad Clockspring
The steering wheel contains this electrical connector. Its major job is to keep the SRS computer and the wheel connected when the wheel is rotating.
However, a lot of hate is frequently directed towards this section. The driver’s side airbag might not inflate in an accident if it stops operating. The SRS light will also give you a warning to let you know what is going on.
Dead SRS Computer Battery Backup
In order to store the data it receives, the SRS computer needs a backup battery. When the engine is off, the battery still functions.
The SRS light may turn on if the battery is running low or dead. The installation of a new battery is the sole solution to this problem.
Previous Accident
After an accident, if the airbags did not deploy, your SRS light can turn on. The system was most likely activated during a collision by the crash sensors.
But if something went wrong and your airbags failed, a fault signal would be transmitted to the computer. As a result, the computer needs to be reset, as indicated by the SRS light.
Faulty SRS Computer
All electrical parts degrade with time. The SRS computer is susceptible to failure just like any other computer. Its demise may be caused by heat, severe vibration, aging, and water damage.
The only fix for a dead computer that causes the SRS light to illuminate is a replacement.
Describe Honda SRS.
In my shop, I had to deal with this only last week. The supplemental restraint system’s SRS light serves as a warning light (airbags). A system issue is indicated by the presence of an SRS light. The fuse for the SRS unit is the first item I would check. This can only be verified with some form of scan instrument. A Solus Pro was mine. The first portion of the numerical error code is displayed by the scanner’s slow flash, and the second portion is displayed by the scanner’s quick flash. You should examine the code and go from there, in my opinion. It will probably display a “non-functional” code; this is a regular issue. In the 2000 Accord EX that I worked on last week, I had to completely replace the SRS unit.
How can I make my SRS light turn on?
The airbag light connects the seat belt system and the airbag system as part of the Supplement Restraint System (SRS) in automobiles (and vice-versa). When you turn on your automobile, the airbag light comes on for around seven seconds before going out, signifying that the internal system check was successful and finished. When the airbag light either never turns on or stays on while blinking, an issue exists. The airbag light needs to be reset at this stage.
Examining seat belt components, fixing bad clock springs, and replacing faulty sensors are a few techniques for turning off an airbag light. New bulbs or a fully charged battery are other options. While most repairs can be done without a professional, others may.
The following 10 steps will reset your airbag light:
- Turn on and off your ignition.
- Test drive your car when it has been restarted.
- Check the airbag switch for the passenger.
- Check to see if the seat belts are in place and functioning properly.
- Check to see if the passenger seat sensor is off.
- Use a scanner with the ability to reset the SRS or airbag light.
- Fix the broken airbag sensors.
- Replace or repair a broken clock spring.
- Check to see if the airbag is working properly.
- seek for a specialist’s help.
Although not exhaustive, the list above includes tried-and-true methods for tackling the problem. Some of them might not apply to your vehicle because compatibility is always based on the year, make, and model. It is recommended that you have your service manual on hand when carrying out any of these fixes. Always follow the manufacturer’s recommendations, too. Let’s get started on resetting your airbag light right away.
What does it cost to repair the airbag light?
The type of defect that needs to be fixed will determine how much it will cost. You might shell out between $1,100 and $1,500 to repair the airbag in the steering wheel, mostly for the labor. But if you can fix the clock spring yourself, it should only cost $250 to $350 to replace it.
Between $350 and $450 is the typical cost to repair an airbag sensor, with the parts typically costing approximately $300. If you don’t have a sophisticated code scanner, it’s advisable to have a mechanic handle the repair because the codes will need to be reset.
How much does a Honda Civic SRS light repair cost?
Cost estimation for the replacement of the occupant sensor in a Honda Civic. A replacement air bag occupant sensor for a Honda Civic costs, on average, between $974 and $999. While parts are priced at $878, labor costs are predicted to range between $96 and $121.
SRS malfunction: what is it?
Have you ever seen a “SRS” light flash on your dashboard? Few Mercedes owners are aware of what this light signifies. Actually, its full name is Supplement Restraint System. This applies to things like airbags and your safety belts. Your airbags might not deploy in an accident if your SRS is malfunctioning. You can see why; it’s crucial to make sure these things are in good operating order!
- car on loan with extensive repairs
- a three-year, 36,000-mile warranty
- the most recent diagnostic technology
- master certified technicians for Mercedes-Benz
Our staff members are genuine Mercedes enthusiasts, and they will handle your car as if it were their own. Come and enjoy European auto repair with a personal touch, we cordially invite you.
Where are the airbag sensors?
Two airbag sensors are often found at the front of your car, just behind the bumper. Inside of your car’s doors are frequently installed airbag sensors.
Since there are typically multiple distinct airbag sensors installed in a car, you must choose which one you are looking for in order to locate it precisely.
The service handbook supplied by your manufacturer is the best resource for locating the airbag sensor’s placement in your car.
Why is my Honda Accord’s SRS light on?
Your SRS, or Secondary Restraint System, is a crucial safety element because it’s made to control the airbags. Have a mechanic inspect your car and ask them if there are any recalls on it to make sure there are no current problems before you reset the SRS light yourself.
Here’s how to turn off the SRS light on a 2002 Honda Accord if you’ve made sure there aren’t any other issues:
- Fuse box is located underneath the steering wheel. To access the fuse box, remove the panel.
- After removing the panel, several wires and connectors ought to be visible. Find the Memory Erase Signal (MES) connector, which is often a two-hole hold plug in green or yellow. Take out the plug.
- Untwist a metal paper clip to create a U shape. Fill the two-hole plug with the paper clip. This will cause the MES connector to short circuit.
- Put your car keys in the ignition to start the engine while keeping the paper clip in the two-hole plug. Never start the vehicle. The SRS light will flash briefly before going out. The two-hole plug and paper clip should be unplugged.
- The SRS light will turn on once more after the paper clip is taken out. To turn off the SRS light, re-insert the paper clip into the two-hole plug. Take remove the paper clip after turning off the light.
The SRS light will blink twice, indicating that the SRS system and light have been successfully reset. However, if your light returns after the system has been reset, you should get in touch with a professional right once.
Consider reviewing your auto policy to ensure you are paying the lowest prices possible for your coverage while you are taking the time to fix your SRS light. Jerry is a free insurance comparison software that checks around for the best deals with more than 50 different insurance providers. You may make adjustments at any time, receive prices instantly, and text an agent with any queries you may have.