One of the vehicles with a higher reputation for dependability is the Honda Civic. As long as you perform routine maintenance, it continues to work hard for you. Sometimes, the car may alert you and let you know what maintenance it needs by giving you codes like the A12.
These maintenance codes typically appear on your dash when the car decides it needs repairs. Any code should indicate that you need to service the vehicle. The A12 code denotes the possibility of an oil change, engine air filter replacement, or tire rotation being required.
There is a lot to learn about the Honda Civic’s maintenance regulations. You can easily take better care of your car once you understand what they signify and how to fix them. Here, we’ll go over some of the requirements for doing this. Visit Vehicle History to find out more about your Honda Civic’s upkeep requirements based on the model year.
In This Article...
Meaning of Honda Service Code A1
A1 denotes the need for an oil change, a tire rotation, a tire pressure check, or tire replacement for your car. These are all pretty typical basic maintenance tasks that are typically completed along with your regular oil changes.
What does the Honda Accord’s b12 code mean?
The Honda B12 service is essentially just a routine inspection carried out by a Honda mechanic. The cost of the parts is roughly $80, and the labor cost is about $120 per hour. An experienced Honda mechanic can complete this task in 20 minutes, or maximum 30 minutes. A dealer will bill an hourly rate.
This service includes:
- Change the oil and oil filters.
- tire turning
- visual inspections of the brake pads and axle boots
- air filter replacement
- replace the cabin air filter
- visual fluid refills and checks (brake, tranny, windshield washer)
Within 30 minutes, the owner can easily complete the first three tasks. The air filter can be easily accessible and replaced if necessary (they don’t always need to be changed), and the cabin filter is located under the glove box. Although it takes a little longer to replace the oil, it can be done in 10 minutes.
Simply inspecting the wheels from below the car constitutes the axle boot examination. Rubber axle boots are often located where the rim is. They must be changed if they are torn. You definitely need a Honda mechanic at this point!
My Honda B12 needs to be cleared.
Every time one of the necessary maintenance tasks is finished, such as an oil change, tire rotation, air filter replacement, etc., your Honda Maintenance Minder light needs to be reset. Your maintenance reminder light shouldn’t need to be reset if you have your Honda serviced at a dealership. It should be done for you by the expert who completed your services. However, if you are performing your own maintenance on your Honda or if the technician neglected to reset the light for you, follow these easy steps to do it yourself.
Resting Honda Maintenance Minder Light
Depending on the vehicle, the light resets differently. Depending on the type of car you have, I’ll outline a few possible approaches.
st Method
The trip button is still present on several Honda vehicles, like the civic. This stalk protrudes from your dashboard and is typically used to select the information you wish to appear there or to reset your journeys. The only thing you need to utilize with this technique to turn off the maintenance reminder light is…
Release the trip button after it begins to flash, then press it once more. I’m done now. Now, the oil life ought to read 100%.
nd Method
On the lower right-hand side of the steering wheel of some Honda vehicles, there are up and down arrows with a reset button situated between them. These buttons are located on the steering wheel of some Honda SUVs, such as the Pilot. These are the only three buttons you will need to press when using this method.
In order to see the oil life percentage shown on the dash, press the down arrow button.
Hold down the reset button while waiting for the cancel or reset options to appear on the dash.
Press the up arrow to choose reset. Likewise, choose this option and press the reset button; the oil life should now read 100%.
rd Method
Any Honda trim model that has a touch screen and a home screen should be compatible with this technique.
You’ll be prompted with a screen that asks if you’re sure you want to reset it or not. Resetting should fix the issue. The oil life should read 100% and your maintenance minders should no longer be present.
Follow the link below for a list of maintenance minders and what they signify if you have a maintenance minder light on but are unsure of what it means.
What transpires when oil life is bad?
Negative mileage indicates that the maintenance interval for your car has past. Have your dealer do the suggested maintenance right away. The engine oil life indicator will blink when there is no more engine oil life left.
What does the letter A1 on engine oil mean?
For instance, the code “A1” indicates that you should rotate your tires, check your tire pressure, or get your tires replaced in addition to replacing the oil in your car. By displaying the percentage of your vehicle’s oil life, Honda Maintenance Minder also notifies you when maintenance is about to be necessary.
What does Honda’s A3 servicing entail?
Say the code “A3” and an orange-lit wrench are displayed on your Honda Maintenance Minder Message.
A is a Main Item that alerts you of the need to change your engine oil.
The Sub Item 3 tells you when to change the transmission fluid and transfer fluid in your car (if equipped).
How can I remove the b12 code?
To turn the switch to ON, insert your key and turn the knob or click the Start button. Never start the car.
Using the Sel/Reset button, go through the vehicle information pages until you find the Oil Life page in the center of your instrument panel. Till the code flashes, hold down the Reset button. When the oil life gauge reads 100% and the alphanumeric code disappears, release your grip and press and hold the Reset button once again.
What does the Honda Accord’s 13b code mean?
If the Honda Civic displays the B13 code, it’s time to change the gearbox fluid and engine oil.
This number indicates that it’s time to replenish the transmission fluid and engine oil.
We can help if you’re looking for a solution to the problem that’s causing your Civic to display code B13. Here, we’ll discuss the value of transmission fluid as well as how to fix your car’s B13 error code. Finally, we’ll cover what other Civic owners have to say about their problems with this code and how you can find out more if you’re considering buying a Civic.
How can I reset the dashboard on my Honda?
It’s encouraging to hear that you maintain your vehicle by having it serviced. Although resetting your dashboard is a simple procedure, think about having a mechanic inspect your automobile once more. Even while the majority of automobiles need to be manually reset after repair, numerous lights flashing simultaneously could indicate a more significant problem.
Having said that, if you are certain your 2019 Honda Civic is in perfect working order, follow these instructions to reset the dashboard:
- Don’t touch the brake; instead, push the Engine Start button twice. You intend to switch into accessory mode.
- Press Home, followed by Settings, on the infotainment screen’s upper left corner.
- Press the car. Select Maintenance Info after that.
- From this point, click Select Reset Items to choose which dashboard lights you want to reset.
- Choose All Due Items if you want to start from scratch. There will be a Reset option in a pop-up window.
- When you choose, a notification informing that your maintenance information has been reset appears at the bottom of the screen. All of your dashboard lights ought to be free after that.
While you are taking the time to understand how to reset your dashboard, talk to Jerry about cheap auto insurance.
Jerry is a free insurance comparison software that checks around for the best deals with more than 50 different insurance providers. You may make adjustments at any time, receive prices instantly, and text an agent with any queries you may have. The typical Jerry client saves $879 annually on auto insurance.
How can I reset the code on my Honda?
These easy steps can help you find the radio’s serial number in your Honda. To record the serial number of your radio, make sure you have a pen and paper nearby. Alternatively, you can use the Notes app on your smartphone.
- The ignition should be turned on (ON or AUX), but the engine shouldn’t be started.
- Turn off the radio to ensure that CODE or ERR are not displayed on the screen.
- Press and hold the one (1) and six (6) buttons on your radio with one hand at the same time.
- Turn on the radio with your free hand while pressing the one and six radio buttons.
- An eight-digit serial number or two smaller serial numbers, which on older models might be separated by a dash, should be visible.
- Release the radio buttons, then write down or type the serial number into your mobile device or piece of paper.
The Honda Maintenance Minder 4 is what?
Five-speed manual – recommended maintenance:
- Examine the exhaust system.
- Check the brakes in the front and back.
- Verify the parking brake setting.
- Replace the brake fluid every three years, regardless of the information display’s maintenance alerts.
- #: Page 184 of your owner’s manual has information on maintenance and the emissions warranty.
- Examine gasoline connections and lines#
- Verify the driveshaft boots.
- Only if the valves are noisy during services A, B, 1, 2, or 3 should you adjust them.
- Examine the brake cables and hoses (including ABS)
- every 160,000 miles, check the idling speed (256,000 km).
- Examine all fluid levels and conditions.
- Engine oil and oil filter replacement
- Examine the suspension parts
- Examine the boots, steering gearbox, and tie rod ends.