You will need a spigot ring to make them fit, however I’m not sure whether they will; someone else would have to confirm.
As far as I’m aware, 5 series wheels cannot be produced to suit 3 series vehicles.
Depending on the 5 series generation. Almost all BMWs have hub sizes of 72.54, with the exception of the e39 5 Series, which has a peculiar 74.1mm hub.
Therefore, aside from the e39, 3 series wheels will physically fit directly on all (standard 5×120 PCD) 5 series. However, you must still make sure the offsets are accurate.
You may already know the solution, but you typed it backwards. For a 3series 72.56mm wheel to fit an e39, the wheel would need to be bored out to 74.1mm.
With spigot rings to make for the difference in bore size, E39 5 series wheels measuring 74.1mm could be mounted on a 3 series (from wheel to car).
My lovely set of BMW Style 5 e31 wide spec wheels would need to be bored out in order to fit on our e39.
I’m unsure since a customer wanted aftermarket wheels installed on an E60 5er, but they were accidentally ordered for a 3er. The entire kerfufel was sorted out by a set of spigot rings!
In This Article...
Wheel fitment chart for BMW
The information in our guide is based on factory options from BMW and reliable tuning firms; these are the wheel and tire sizes that might have been ordered for your car at the time of manufacturing or that have been tried out by organizations like Alpina, Hartge, and AC Schnitzer. Using these sizes allows you to adapt larger/smaller or different-style wheels while still guaranteeing proper fit and safety, which is crucial. Instead of reproductions or copies, we only offer to our customers authentic BMW wheels created by or for BMW.
When purchasing new BMW wheels, you can use this fitment guide to determine the range of wheel sizes that will fit your vehicle as well as the requirements for proper installation. Although our web configurator offers an automatic way to find the right wheels for your BMW, you should still refer to this chart if you’re looking through our product selection by hand. This table not only aids in determining wheel sizes but also shows tyre sizes for each wheel; this information is helpful when buying a set of replacement tires or adding tyres to an order for new wheels.
The BMW car type (e.g., 1 series, 3 series, 5 series, etc.) and model designation number are listed in this fitment chart; the model designation number is a development code (also known as the Entwicklungscode) that BMW assigns to each vehicle model. The most recent BMWs have been given the letter “F” and a number instead of the traditional “E” and “number” development codes.
For instance, BMW 3 Series vehicles produced between 2006 and 2011 appear on our fitment chart as BMW 3 Series (E90), and BMW 3 Series vehicles produced after 2012 appear as BMW 3 Series (F30).
If you are unclear of your vehicle’s development code, please consult your owner’s manual. You may also find more information by taking a look at our list of BMW models and codenames.
The dimensions and offsets for BMW wheels and tires are provided in our fitment guide below. For your information, our primary fitment guide includes a page with an explanation of each of these measures.
Can 5 Series wheels be used on a 1 Series?
Has anyone ever swapped a 1 series’ wheels with 5 series’? I was looking at a 17-inch TV and unsure whether this was feasible. Would centering rings be necessary?
Wheels from the 5 series cannot be put on a 1 series. The 5 series’ offset is too low, and unless you’re talking about 15-inch wheels or something, the wheels will never be narrower than 8 inches.
Due to this, the only way they could fit was if you stretched the car’s ultra-narrow tires. It might not even turn properly in the front and wouldn’t even look like a good euro stretch configuration.
You likely like the wheel you’re looking at because it has a lot of lip, a concave face, or something similar. However, the 1 series cannot accommodate wheels with features like those.
The M3 sunflowers fit on E36 3 series wheels. Though the standard e46 wheels should be fine (e90 may depend on the width/size chosen), the later M3 (e46/e90) don’t since the rears have a too low an offset.
Most 3 series front OEM wheels will fit the front and back of the 1 series. It’s only that unless that car is also running a square layout, you won’t be able to use their back wheels.
My dealer informed me that I could add square tires to my 2010 135i for no additional cost. (The non-square 2009 17″ $0 option is 7.0″ front, 7.5″ rear.) On a 2010, [wheel: star spoke style 262, four 17″x7.5″ 225/45 tires], I’m very confident that I can order a square set of 17″ x 7.5″ all-season RTFs.
Would 17″ x 8″ tires and wheels fit on the front of the 135 without any modifications, spacers, or other devices of the sort? What about the back? They offer both 7.5″ and 8.5″ as normal options on the rear, so I assume they’d be okay there.
Who knows? Could I use the matching 3-series wheels, like styles 284, 161, or 286?
I’m sorry if this information has already been addressed in another thread on the forum. I read the other thread that was mentioned, but I’ll be honest—there were so many changes, adjustments, and so on—that it was difficult for me to grasp what they were doing.
What size tires are on a BMW 5 Series?
The four available BMW 5 series models are the 520i Sportline, 530d M Sport, 520d Sportline, and 520d Luxury Line. The 520i, the petrol version of the BMW 5 Series, rides on 10-spoke diamond-cut alloy wheels and 245/45 R 18 radial tubeless tires. The remaining three versions also provide tires in the same size.
Three variations of the BMW 5 Series were offered for sale in the Indian subcontinent between 2013 and 2017: 520d Luxury Line, 520d M Sport, and 530d M Sport. The 520d Luxury Line and 520d M Sport models had 245/45 R 18 tires installed, whereas the 530d M Sport model had 245/45 R 18 and 275/40 R 18 tires mounted on the front and rear wheels, respectively.
Additionally, the 5 Series models sold from 2010 to 2013 came with 225/55 R 17 tires. All 5 Series models have had run-flat rubber-wrapped alloy wheels since their introduction to the Indian car market.
The BMW 5 Series entered its seventh generation with modifications like improved front and rear ends and updated engines built into the new models, making it the pinnacle of performance vehicles. The sedans that the BMW 5 Series competes against in this segment include the Mercedes Benz E Class, Jaguar XF, Audi A6, and Volvo S90.
The BMW 5 series has a significant usage of chrome accents throughout the appearance, including the fog lamp encasings, a massive grille, and a sculpted bonnet. The matte finished dual exhaust pipes are the visual focal point at the back. The interior of the BMW 5 series is one of the most user-friendly ever seen in a luxury vehicle. A redesigned instrument cluster has dials for both analog and digital readings. The analog dial demonstrates another level of care that BMW put into the new 5 Series. BMW’s iDrive system, which is now equipped with an 18.5 cm touchscreen and a sizable controller in the center tunnel, is also available for the 5 Series. In order to provide on-the-go entertainment for the back passengers, LCD screens have also been fitted into the back of the driver’s and passenger’s headrests. Additional top-of-the-line amenities include the Harman Kardon audio system, BMW display key, remote control parking, parking assistant, BMW head-up display, rear seat entertainment system, and others.
The 2.0 L, 4-cylinder turbocharged MPFi engine included in the 5 series petrol variant produces 350 Nm of maximum torque at 1450–4800 rpm and 250 PS of maximum power at 5200 rpm. The 2.0 L, 4-cylinder CRDi engine that powers the base diesel model has a maximum output of 190 PS at 4000 rpm and a maximum torque of 400 Nm at 1650–2500 rpm. The same engine, which generates comparable power and torque output ratings, is also available in the premium variant. The top-of-the-line BMW 5 Series 530d M Sport diesel model is equipped with a 3.0 L engine that produces 620 Nm of peak torque between 2000 and 25000 rpm and a maximum power output of 265 PS at 4000 rpm. Standard on all models is an 8-speed automatic transmission.
What is the BMW 3 Series’ bolt pattern?
Early BMW 3 Series cars, such as the E21 and E30, used a 4×100 PCD. Later models, however, moved to a 5×120 PCD, which has now become standard across the whole BMW lineup and is referred to as “BMW fitting.”
Although the 5×120 PCD is common to all current 3 Series vehicles, it is important to keep in mind that alternative wheel bolt sizes may be needed depending on the specific model. While F series cars (F30, F31, F34, and F80) need M14 wheel bolts, E series BMWs (E21, E30, E36, E40, E90, E91, E92, and E93) accept M12 wheel bolts.
There are PCD hub converter kits available that fit over your current wheel hub and enable you to utilize wheels with different PCD patterns on your car if you want to install a modern wheel with a 5×120 PCD on an early 4×100 3 Series model.
What is an equivalent to the BMW 5 Series?
The 2022 Mercedes-Benz E-Class premium executive vehicle is last but not least. The E-Class sedan, a 2022 Editors’ Choice selection by Car and Driver, comes with a choice of two engines: a 362-horsepower twin-turbo V-6 engine with a 48-volt hybrid system and standard all-wheel drive, or a 255-horsepower turbocharged four-cylinder engine. A
Heated front seats, a 12.3-inch digital instrument cluster, and ambient interior lighting that can be adjusted as standard are all features of the E-Class vehicles. For an additional fee, features like a head-up display, ventilated front seats, a panoramic sunroof, and massaging front seats can be installed. Mercedes’s MBUX infotainment system, which integrates Apple CarPlay and Android Auto, and an optional Burmester sound system are both included in the ESa 12.3-inch infotainment touchscreen system. A
Are there variations in BMW lug patterns?
Most BMWs have a lug pattern of either 5×4.41 or 5×4.72; nevertheless, in order to change the rims or replace the wheels, you must be aware of the precise dimension.
Can a 5×114 3 fit a 5×120?
The fact that 5×120 to 5×114.3 wheel adapters can only fit on 5×120 vehicle hubs and convert 5×114.3 wheels is crucial to understand. To avoid wasting time or money, conduct some research before starting the project. Most of the time, you can quickly check the bolt pattern in your owner’s handbook or on Google by entering the model and year. However, there might be some exceptions, particularly if you don’t know the new wheels’ PCD.
It is best to measure the lug pattern size yourself, however. Choose one lug hole on a 5-lug wheel as your starting point, and then use a ruler to measure from the edge of that hole to the center of the hole next to it (skip the one bolt hole). The bolt pattern would be 5×4.5″ or 5×114.3 if the bolt pattern circle diameter is 4.5 inches (114.3mm). Of course, you can get help from your neighborhood auto shop.