Why Won’t My BMW Connect To Bluetooth?

BMW / By

For me, the solution was taking the phone out of iDrive, selecting “forget” in the Bluetooth menu, then renaming the phone in the about menu. Afterward, connect it. Changing names

Steps in Troubleshooting That Have Failed (for Me)

The troubleshooting steps that your BMW dealer or Apple Genius might suggest are shown below. Although none of them have been successful for me, it doesn’t harm to try the ones you think might be useful:

  • Turn on pairing mode to re-pair the devices after erasing all previously-paired Bluetooth devices (BMW) and the Bluetooth accessories (vehicle) in iOS.
  • iOS software update (this often makes the situation worse)
  • The iPhone was factory reset (a huge waste of time)
  • Reset the network settings on your phone (iOS)
  • turn on and off airplane mode
  • changing the head unit (BMW)
  • Bluetooth should be turned off, then back on.

Most frequent BMW Bluetooth issues

Call dropouts, music that won’t play despite a decent connection, phones that won’t pair with the car, and poor voice quality at high speeds are just a few of the Bluetooth problems BMW drivers may experience.

Although the symptoms can differ, software is almost always the primary culprit. Or, if you prefer, the software bug. Likewise in your BMW and phone.

I’ve swapped out a lot of control units and antennae when troubleshooting Bluetooth issues, only to find that the largest offender is actually the flaw in smartphone software.

For those of you having trouble pairing your phone with your vehicle, please enable the bluetooth capability on your phone and wait for it to locate your vehicle. It will complete the task without difficulty. Sometimes it won’t connect to your automobile if you try to do that (in my case, most of the time it wont do it the first time). So give that a try if you’re having trouble connecting your phone to your automobile. Mine now consistently functions.

correct, provided you have the “authorized” phones as per BMW. My Samsung Bluetooth phone connects to the car without any issues, however it doesn’t function. My friend uses his razor with no issues.

Upgraded software A remedy for the sporadic bluetooth connection with the phone is included in CIP 20. Since my Treo 650 is unlocked and not on the list of permitted devices, I can only occasionally connect it to the bluetooth on my 325i. Following the CIP 20 upgrade, it operates flawlessly. Remember that my phone is not on the carrier’s approved list. Although not certified for t-mobile, it still performs excellently on sprint. No issues any more. One caveat: You must inform your SA that your bluetooth is giving you trouble in order to receive the upgrade.

For two months, I dealt with the BT issue. The issue appeared to be a timing and pairing software bug. In January, the dealer installed CIP 20 per service recommendation. BT has performed admirably ever since.

Although I don’t believe it is the same issue you all are experiencing, my car is now receiving an upgrade. I would have the bluetooth and assist disappear from the selections (I’d receive a — beneath both). They claimed that because the TSU was also recalled, they would likely need to obtain a replacement after the update.

How do I make my BMW’s Bluetooth function?

You must first begin the Bluetooth connection process on your car’s radio in order to connect your Android device to your BMW vehicle. You will then be prompted by the system to finish the device configuration. Go to the Settings section of your Android phone and choose Wireless & Networks.

Why won’t my BMW and iPhone connect?

Try these actions if the problem still exists after the update: Make sure Bluetooth Sync Contacts is turned on in Settings > Bluetooth. Go to Settings > Bluetooth, turn Bluetooth off, and then turn it back on. Restarting your iPhone after turning it off

What is the BMW iDrive’s Bluetooth setup procedure?

  • Make sure your mobile device has Bluetooth turned on.
  • Press COM > Mobile Devices > New Device on the iDrive 7 screen’s left side to add a new device.
  • Choose your BMW from the Bluetooth menu on your smartphone.

Why is my Bluetooth no longer able to connect to my car?

  • If your Bluetooth devices aren’t connecting, they probably aren’t in pairing mode or are out of range.
  • Try rebooting your devices or letting your phone or tablet “forget” the connection if you’re experiencing persistent Bluetooth connection issues.

When your computer won’t connect to a printer and you’re in a rush, it can be mildly annoying when your headphones won’t pair with your phone. It can also be really inconvenient.

Why does my iPhone no longer connect over Bluetooth to my car?

Try these steps to see if they help you couple a Bluetooth accessory, like as a wireless keyboard, to your iOS or iPadOS device:

  • Ensure that your iOS or iPadOS device and Bluetooth accessories are in close proximity to one another.
  • Restart your Bluetooth device after turning it off.
  • Make sure your Bluetooth accessory is turned on, fully charged, and plugged in. Check to check if your attachment needs new batteries if it does.
  • Make sure Bluetooth is enabled for any apps you use with the Bluetooth accessory by going to Settings > Privacy > Bluetooth on your iOS or iPadOS device.

How do I reset the Bluetooth module in my BMW?

I don’t have iDrive; I have a bmw professional system. and the Bluetooth worked flawless until the phone icon on the screen suddenly changed to two dashes.

Now, nothing happens when you touch the BT button in the menu! And my phone won’t pair because it can’t locate the BMW BT! I can’t access the menu to turn it on either. lol

According to an auto electrician, removing the battery would reset everything EXCEPT the airbags, and all warning lights would illuminate until I took the vehicle to a BMW dealership for a reset. Ist das so?

I’m not sure if that happened on the 320, but it did on my 330. The bluetooth returned after I unplugged the negative battery cable. Nothing, not even airbag lights… It’s much the same as changing a battery, which is something that is frequently done without a reset.

My experience was the same. My entire iDrive ceased functioning a few days after the BlueTooth quit functioning. You might be going through the first step of iDrive failure, so I hope you don’t experience the same issue I experienced.

Yes, I might experience a similar issue. I thought I noticed the Bluetooth icon when the salesman told me I had Bluetooth, but it’s gone now. Can I check to see if my car has Bluetooth?

If a bluetooth module is present under the boot floor—not the typical lift-up part, but the area closer to the back seats—you have Bluetooth. In my case, the issue was that I hadn’t reconnected the CD changer at that point after installing an amplifier. The BT connects to the head unit via a fiber optic link, which loops through other devices; if you unplug one of them, the BT is lost. Therefore, if a reset doesn’t work, I would advise the original poster to verify all the fiber connections.

The TCU can be seen if you take the trunk carpet out (telematics control unit). If you unplug the big connector and the fiber optic connector, then wait an hour before plugging them back in, Bluetooth should come back!

How can I connect my BMW gadget?

1 Open the iDrive and select the “COM” option. Select the device you want to use to start the Android Auto connection under the “Mobile Devices” section. 2 From the device menu, choose “Start Android Auto.” 3 If this is your first time partnering with Android Auto, choose “Confirm Note” from the pop-up that appears.

What is the BMW-iPhone pairing procedure?

On your iPhone, go to “Settings” > “General” > “Siri” and “Settings” > “WiFi” to accomplish this. You may now use Bluetooth to link your iPhone and automobile together. To do this, go to your iPhone’s settings and choose “Bluetooth.” Then select “Manage mobile devices” from the menu under “Media” on the BMW control display.

How can I get my BMW ConnectedDrive back online?

  • Type your VIN’s final seven characters here.
  • Choose whether you are the primary or backup driver of the car.
  • On the infotainment screen on your car, look for the security code. It may be accessed by going to Main Menu > ConnectedDrive > Messages. Your phone’s ConnectedDrive app will ask for the same code.

How do I reset the Bluetooth in my car?

The best approach to accomplish this is to turn off Bluetooth on both your smartphone and your car. Remove your smartphone from the infotainment system in your car, along with any history of connected devices. After that, turn off the car, turn on your smartphone, and restart it.

My BMW Connected app has to be refreshed.

Connected Drive by BMW. Select “CAR menu” > “Settings” > “General settings” > “Reset vehicle data” in your BMW with Operating System 7 to reset your personal data and settings.

How can I activate the car pairing mode on my iPhone?

CarPlay, a smarter and safer way to use your iPhone in your car, is a feature that is available in some vehicles. When you use CarPlay, the functions of your iPhone that you want to use while driving are shown right on the dashboard of your vehicle.

To begin with, confirm that your country or area and your car both support CarPlay.

Connect your iPhone to the USB port on your car’s audio if it supports CarPlay utilizing the USB port. A smartphone symbol or a CarPlay icon may be used to identify the USB port.

Press and hold the voice command button on your steering wheel to set up CarPlay if your vehicle supports wireless CarPlay. Alternatively, check sure your car is in Bluetooth or wireless pairing mode. Next, select your vehicle on your iPhone by going to Settings > General > CarPlay > Available Cars. For more details, consult the owner’s manual that came with your vehicle.

How can I make a Bluetooth device link by force?

  • From the top of the screen, swipe downward.
  • Touch Bluetooth and hold it.
  • To pair a new device, tap. If Pair new device isn’t there, go under “Available devices” or hit More. Refresh.
  • Select the Bluetooth device you want to associate with your device by tapping its name.
  • Observe any guidelines shown on the screen.

How can I update my BMW Connected application?

In the car, perform the following steps to update apps and services: – In the idrive menu, go to the “installed apps” menu item, press the idrive option button (takes 10 seconds or so). – Go to installed services in the linked drive services and update those (with the option key as well)