Why Is My BMW Sat Nav Not Working?

BMW / By

Allow the iDrive to restart by holding down the power button for 20 seconds. Possibly fix it Allow the iDrive to restart by holding down the power button for 20 seconds. Possibly fix it

When the BMW GPS stops working, a technical issue

GPS navigational tools from BMW are not responsive. The street navigation toolkit can be defunct as a result of aging or other technological issues. In a rare instances, it has been determined that the CCC, also known as the car communication computer, is at fault for the unexpected stall in iDrive’s performance. Because of this, it provides inaccurate information on the location of the car and the state of the roads. For the street navigation systems’ operations to be optimized, the CCC needs to be repaired. A driver will pay about $1000 for it. Many BMW owners engage qualified mechanics to improve their street navigation systems, swapping out CCC with CIC. CIC has been tested and shown to be superior to CCC. However, it is not completely secure because CIC may lead to issues along the road. The processor chip issue is one of the causes of technical failure in BMW navigation systems. It is related to CCC and it may bother sometimes. The technician frequently upgrades the CCC for simple restoration using a heat gun. Long-term, nevertheless, it might not succeed. Depending on the state of the CCC.

How frequently are new maps for BMW released?

BMW suggests conducting a map update every six months, or at the very least once a year, and typically releases up to three new versions of its products each year.

The head unit and the nation have a significant impact on how frequently new releases occur. For instance, more recent iDrives like the NBT Evo ID5/ID6 can receive two or three updates a year, whereas ENTRYNAV may have to wait up to a year for a new BMW navigation update. Even the more recent navigation systems might have to wait in some areas where new map updates aren’t even issued annually.

By entering your VIN on the BMW map update page, you can quickly verify the most recent update for your BMW sat nav. You will then get a list of regions that are compatible with your iDrive, along with years and numbers that represent the quarter in which the update was released.

How can I verify the version of my BMW map? Navigate to the navigation view on your iDrive, select Settings, and then scroll down to Navigation system version. The region, version, and year of your current map are displayed. If it’s more than a year old, it’s time to update.

Traveler6221

I advise restarting your BMW’s iDrive system in light of what you’ve described. When the car is parked and turned on, press down on the volume knob for about 70 seconds to restart the iDrive. At this point, nothing will appear on the screen.

Why did the sat nav stop functioning?

Not received email:

Please make sure your email is in your inbox and check your spam folder. Don’t forget to mark our email address as a safe sender.

Users of Gmail: Our email can be found under the promotions tab. The simplest ways to move an email is to left-click and hold on the email and drag it from the Promotional tab over to the Primary tab. The email will drop into the main tab when the mouse is released. Gmail will prompt you to make the adjustment permanent after you’ve dropped it.

Check out the guide below if your GPS or sat nav stopped working or if you cannot receive a GPS signal.

  • Install the most recent firmware for your device. Installing your Sat Nav’s software on your PC or Mac and connecting your Sat Nav to your computer make this simple to accomplish. If it doesn’t update automatically, look for a button that says “Update”. Note: There is a GPS “rollover” event that occurs every 20 years, which means your device can stop operating until you update it once more. The most recent rollover occurred on April 6, 2019.
  • Ensure you have a reliable GPS signal. Ensuring you are outside is the greatest option for receiving a solid signal on your Sat Nav or GPS device. If you are behind trees, adjacent to buildings/in the city or even in a deep valley you may have signal troubles. Your signal may also be affected by the weather.
  • Restore factory default settings. You can reset certain devices via the menus, while you can reset others by USB-connecting them to your computer. On the back or bottom of some gadgets, there may be a tiny hole that needs to be pressed with a pin.
  • Has your GPS recently gotten wet? Some hand-held GPS gadgets are intended to work in light showers or the rain. However, most automotive sat navs are not waterproof, and even a small amount of moisture coming in via the window could cause corrosion.
  • If you’re still having trouble receiving a signal, there may be a hardware problem, such as a malfunctioning logic board or antenna, or, as in the case mentioned above, corrosion from rain. If your GPS or Sat Nav device is older than five years, it’s generally best to replace it.

Bring your malfunctioning GPS device into any iFixTech location if you’re unsure how to fix it or would need a qualified technician to look it over, update the software and maps, and otherwise service the device.

Does the BMW sat nav automatically update?

You are prepared to get inside the car once you have downloaded the map update or purchased the dealer’s USB disc with the update. Put the USB disk containing the most recent map data into your car’s USB port. The navigation update mode is automatically switched on by the Control Display. Choose “OK” to launch the update. The entire upgrade process could take anything from 30 to 90 minutes. You are not required to wait for the update to be finished. During the upgrade procedure, you can continue use your car and navigation system. Go to your map and press OPTION on the iDrive controller to restart the updating process. Next, choose “Navigation data update.” Please keep the USB disk in place until the update is complete. The navigation system will restart itself after the update has been installed successfully. This ends the updating process. To verify the currently installed map version, please go to ‘Navigation’, select ‘Settings’, ‘Position and version’ and pick ‘Version information’.

Why isn’t my car’s navigation working?

Depending on the device, CoPilot might be able to get a GPS fix more rapidly thanks to the GPS feeds provided by Google’s location services. Google’s location-based services might be more device-specific.

Additionally, consider the following advice:

  • The device needs a clear, direct view of the sky in order to receive GPS signals.
  • You might need to purchase an external GPS receiver if the device doesn’t come with one.
  • You might need to purchase an external GPS receiver if the device is unable to locate a GPS fix.
  • It is recommended to utilize a mounting support of some kind to cradle the device while driving.
  • Make sure your device’s GPS receiver and/or location-based services are turned on.
  • Verify that Airplane Mode is not active on the device.
  • Make sure your mobile data is sufficient. CoPilot does not require the usage of data, but in order to first obtain a GPS fix, your phone or tablet may need to be connected to the mobile network. After getting a GPS fix, turn off data roaming.
  • Make sure the device’s battery has enough power.
  • The GPS receiver might not be functioning properly if you can’t get a GPS fix within 10 minutes; restart the device and try again.

How do I make my BMW’s navigation work?

A very advanced navigation system that is fully integrated and installed in your BMW offers a variety of methods for entering data and can be customized to meet your needs. First, you can use the BMW ConnectedDrive portal or BMW Connected App to submit an address or location to your BMW in advance of your trip. When you’re driving, you can access it through your notifications. Select “Navigation” from the main menu or click the “NAV” button on the iDrive controller to manually enter a destination while inside the car. On the map screen, tilt the iDrive controller to the left and scroll up to select ‘Route Guidance’. Depending on how much information you want to provide, you may enter anything from a postcode or just the name of the town or city to a full address that includes the street name and house number. You have a variety of options for entering the information within each section. You can use the iDrive to turn and choose each character, use the touchpad on top of the iDrive to actually type each letter, speak the information using the voice assistant, or utilize the digital keyboard on the touchscreen. After entering the necessary amount of information, simply scroll down and choose “Start Guidance.” As an alternative, you can conduct a points-of-interest search using your BMW’s connectivity, and the online feature will return current results from the Google database. Previously visited addresses are displayed in the recent destination menu and can be quickly accessed again. From here, frequently visited locations can be saved as favorite buttons. Simply use the iDrive to mark the location, then press and hold the corresponding favorite button. When you arrive at your desired location, the navigational assistance immediately terminates. By selecting “Route Guidance” from the left map menu once more, followed by “Stop Guidance,” the guidance can be be manually halted at any moment. Alternatively, simply ask for the guidance to be switched off by pressing the voice assistant button on the steering wheel and say ‘Stop Guidance’. The BMW Professional Navigation System has a ton of additional useful features. Please see the integrated owner’s manual in the vehicle for more details, or get in touch with your local BMW Center.

Why isn’t my navigation working?

A better Wi-Fi signal, recalibrating the app, updating Google Maps, or checking your location services could be required. If the Google Maps app isn’t working, you can reinstall it or just restart your iPhone or Android device.

How can I turn on my car’s navigation system?

  • Launch the Google Maps app from the home screen of your car.
  • There could be up to two suggested locations. To find or navigate to your location, tap on these.
  • Start or stop your navigation: On the map, alternate routes will be displayed as gray lines. To change your route choice, touch the gray lines.

How do I update my BMW’s GPS?

The most recent BMWs, in contrast, save the map data on an internal hard drive, which can be updated either by downloading the newest BMW maps and manually uploading the information to the iDrive, or (in some vehicles) automatically by BMW.

When your navigation system needs to be manually updated, there is no special software or programming needed from BMW. The map information is downloaded to a USB stick that can be inserted into your BMW’s armrest or glove compartment (in older models with the CIC iDrive system) (in newer vehicles). When a new map becomes available for installation on the iDrive, the system will immediately detect it. To start the installation, your iDrive controller will ask you to provide a BMW FSC activation code. You won’t need to use any BMW iDrive coding software because everything is done over the USB connector.

You’ll be all set to go after the procedure is complete. How long does it take to upload the BMW map update? Again, It depends on your head unit and the last time you made a BMW navigator update download. It will take longer if your map version is more dated.

For BMWs equipped with the ENAVEVO, CIC, NBT, NBT Evo, and other head units, BimmerTech provides navigation map upgrades. Available for North America, Europe, Australia / New Zealand and other regions, for vehicles running the Premium, Motion, Next, Move or other navigation versions.