Recently, the US, Canada, and Mexico selected bp (the maker of the Castrol brand) to resume supply of BMW Group Engine Oil. As of February 2021, Castrol, who served as the supplier for a total of 14 years, has started up again.
In This Article...
Who produces the oil for BMW?
BMW Group Engine Oil is produced by whom? Recently, the US, Canada, and Mexico selected bp (the maker of the Castrol brand) to resume supply of BMW Group Engine Oil. Since February 2021, Castrol, who served as the supplier for a total of 14 years, has started up again.
How did BMW come to use 0W30?
BMW 0W30 is API SN and ACEA A5/B5 rated for exceptional fuel efficiency and holds the LL-01 FE approval. BMW switched from 5W30 to 0W30 in the fall of 2016 in an effort to cut pollutants during cold starts and boost fuel efficiency. For all vehicles that formerly asked for an LL-01 5W30, BMW now suggests 0W30.
According to BimmerWorld, you should only use this 0W30 formulation in contemporary BMWs with turbochargers. Why not for models without turbos? This oil was developed especially for BMW turbo engines starting in 2007. According to BMW, this reduced viscosity satisfies the requirements for BMW’s extended oil change intervals while also reducing pollutants and improving fuel efficiency. However, we believe the lower viscosity does not provide significant protection for non-turbo models, notably the older and higher mileage normally aspirated BMWs, especially at peak oil temperatures. We advise using the Red Line 5W30 or Euro 5W30 (higher ZDDP) premium oils on these non-turbo applications that previously utilized the BMW 5W30 oil. We advise Red Line 10W40 or 15W50 high performance oil for automobiles exposed to greater temperatures, driving schools, and track time for the greatest protection and reduced oil usage on engines with increased mileage.
Is 0w30 oil uniform throughout?
Because 0W-30 oil is multigrade, it responds to heat and cold as two different viscosity grade lubricants. A single-grade oil known as SAE 30 maintains a higher viscosity that is more suited to warmer conditions.
The majority of contemporary engines, including diesel and gasoline engine models, as well as passenger automobiles and light trucks, run on 0W-30 oil. Smaller air-cooled engines, such as those in lawnmowers and light tractors, need SAE 30 oil.
Which type of oil do BMW dealers use?
The original BMW Twin Power Turbo engine oil, also known as BMW Advantec synthetic oil or Genuine BMW Engine, is often used by BMW Dealers. BMW switched to Shell Oil in 2015 from Castrol Oil (British Petroleum) to produce its proprietary synthetic motor oil.
Pennzoil, a division of Shell Oil, is a sponsor of BMW Motorsports. For an oil change, some BMW shops might also provide Pennzoil products.
Which oil is ideal for BMWs?
Oil for the majority of BMW passenger and SAV vehicles: 0W-40 Mobil 1 SAE. SynPower SAE 5W-30 by Valvoline. SAE 0W-30 Castrol Syntec European Formula. BMW will start advising Shell/Pennzoil PurePlus Oils as their aftermarket oil in 2015.
Which oil filter manufacturer does BMW use?
The filter, two cap o-rings, and a drain plug crush seal are all included in the Mann oil filter kit for the E82, F22, E9X, F30, F32, E60, F10, X1, X3, X4, X5, X6, and Z4. For our clients, we need OEM, or Original BMW filters. For this and other filters found in your BMW, Mann is an OE supplier to BMW. As an original provider, Mann’s filter products satisfy or go above BMW specifications. They are designed to fit properly and to meet the filtration requirements of the six-cylinder N51, N52, N54, and N55 engines.
Also fits N20/N26 turbo 4-cylinder engines with aluminum oil filter housing in the F22/F30/F32 iX xDrive variants. Check your housing for N20/N26 models because it might be made of plastic or metal. Take note that BMW might have replaced some plastic housings with aluminum as part of a warranty.
Can I use 5w30 with 0w30 BMW?
My 2006 BMW 330i alerted me to add an additional quart of engine oil, so I went to the store to purchase them. However, the parts clerk gave me 0W-30 rather than the standard 5W-30. Is it acceptable to combine/fill where 5w-30 was used?
You can find specific instructions for use in the manual. The values 0w30, 5w30, 0w40, and 5w40 are all good. At working temperature, the viscosity of 0w30 and 5w30 are same.
Castrol is ambiguous in that the 0W30 oil provides both the protection of -30 and the flow benefit of 0W when it is cold. Which IMV is another way to say what was just said.
Does BMW need particular oil?
Because of this, BMW advises using only synthetic motor oils in all BMW engines. As a result of the advancement in technology, stronger, more durable fluids and lubricants are now required than ever before.
Shell produces BMW oil, right?
For a further three years, to the end of 2022, Shell has been officially reaffirmed as BMW AG’s exclusive preferred supplier of aftermarket engine oils in EMEA for all BMW Group brands, including BMW, BMW I BMW M, MINI, BMW Motorrad, and Rolls-Royce Motor Cars.
The three-year agreement will ensure that consumers can continue to purchase premium BMW engine oils from Shell at BMW’s network of dealers in Europe, the Middle East, and Africa.
Through this partnership, Shell will continue to produce and deliver engine oils under the BMW brand that adhere to the most recent BMW engine requirements. These oils will use Shell’s revolutionary PurePlus Technology, commonly known as gas-to-liquid (GTL) technology, which produces base oil using a patented method that converts natural gas into base oil.
“We consider it a great honor to collaborate with BMW and offer them premium engine oils made with our cutting-edge technology. As we continue to develop our commercial and technical connections, we look forward to further strengthening the collaboration “Patrick Carre, vice president of Shell Global Commercial’s Global Key Accounts, stated.
Is BMW authorized to use Mobil 1?
Warranty. Use the proper oil in your automobile to comply with the requirements set forth by the BMW manufacturer. The BMW manufacturer’s warranty won’t be impacted by using the proper Mobil 1 product during routine maintenance and in accordance with your vehicle’s manual.
Can Castrol be used on a BMW?
Since BMW began supporting Castrol in the early 1990s, I can honestly tell that utilizing Castrol has never failed to deliver. I believe it to be a fantastic oil, and BMWs appear to respond well to it. You can buy it pretty much anywhere for a fair price. Stick with it if you like it and use it.
Which is preferable, 5w30 or 0w30?
The operating temperature range for 0w30 is between -35 and +30 degrees Celsius, or -31 and +86 degrees Fahrenheit, whereas for 5w30 it is between -25 and +30 degrees Celsius, or -13 and +86 degrees Fahrenheit. Because of this, 0w30 is a preferable choice during the winter.
The freezing point of oils of the same specification may vary by 6-7 degrees. The disparity can be attributed to the large viscosity range used to determine a 0W standard. Furthermore, the calculated results do not suggest that starting the engine at a lower temperature is impossible. Even at -35 degrees Celsius or -31 degrees Fahrenheit, the engine should start satisfactorily while using 5W oil, but the friction pairs in the motor, starter, pump, and other components will be heavily loaded.
Compared to 0w30 engine oil, 5w30 offers higher wear prevention due to its additional additive package. This prevents the moving elements of the engine from wearing out too quickly and generating noise while you’re driving because less mechanical power is required to overcome friction in them.
Compared to 0w30, 5w30 offers a little advantage in terms of fuel usage, although as I mentioned before, this advantage is not very noticeable.
In every season, both oils guarantee proper engine operation. Just that the range of 0w30 is a little bit wider.
If the automobile manufacturer specifies it in the handbook, a thinner oil, such as 0w30, can be used when the engine is relatively fresh, but as the engine accumulates miles due to prolonged operation, the gaps between the mechanisms widen. As a result, the oil is no longer able to offer the required level of defense against following wear, tear, and overheating.
Utilizing motor oil with a higher viscosity is the answer in this situation. Therefore, it would be wise to use the 0w30 formulation for the first 6000–70000 miles. If the indicator is surpassed, it is advised to switch to a more viscous version, such as 5w30. If this advice does not conflict with the manufacturer’s specifications, it may be used.
At first appearance, you may assume that the two types of oil are fairly similar and that you could simply swap one for the other. However, this is a mistake that I frequently observe drivers making, and the results can be dangerous.
Applying the manufacturer’s instructions requires great caution; staying away from its prohibitions is also advised. When the car handbook specifies that only 0w30 is appropriate, 5w30 cannot be used in its place. The performance of the engine might be negatively impacted by excessive viscosity. Extreme effort is required to turn the crankshaft, which increases the strain on the engine, causes overheating, and raises fuel consumption.
The area of application is another distinction between 0w30 oil and 5w30 oil. The first kind is most frequently employed in diesel vehicles equipped with particle filters. The second applies to all motor types.
What about Liqui Moly for BMW?
The motor oil is brand-new as of November 2019, but the engines it is utilized in are not nearly as new. For older BMW gasoline vehicles from model year 2002 without particle filters, LIQUI MOLY, a German oil and additive specialist, has created Special Tec B FE 5W-30.
BMW has given their official approval for the use of LIQUI MOLY Special Tec B FE 5W-30 for the Longlife-01 FE standard. Lowering the High-Temperature-High Shear viscosity is how fuel economy, or “FE,” is achieved (HTHS viscosity). Because of this, Sebastian Zelger, Director of LIQUI MOLY USA, believes that this new oil is a perfect complement to their Special Tec LL BMW oil. Although it lacks “FE,” it complies with the Longlife-01 standard.
BMW has implemented new engine testing and is gradually phaseing out the older oil approvals, necessitating the manufacture of a new oil specifically for older models. By the way, Europe has no problems with this oil. Oil that corresponds with the more recent and commonly used BMW Longlife-04 FE specification can be used in these cars. Only certain types of fuel can allow this type of oil to perform to its maximum potential. BMW only permits the use of these Longlife-04 lubricants in Europe because of this. An oil that conforms with the Longlife-01-FE-specification is necessary in North America as well as other regions of the world, such as the brand-new LIQUI MOLY Special Tec B FE.
Does BMW advise using shell?
Since 2015, BMW has advised using Shell V-Power(r) NiTRO+ Premium Gasoline in all BMW M vehicles, including the eagerly awaited M4 GTS.
America hasn’t had access to the greatest BMW M3 for 26 years, claims Road and Track. With the M4 GTS and a sizable allocation—300 out of the 700 vehicles planned—the US is now getting a piece of the action.
Is Castrol EDGE ll safe to use in my BMW?
Application Castrol EDGE 5W30 M LL-04 For use in BMW automobiles that require a BMW Longlife04 specification, Castrol EDGE 5W30 M LL-04 is permitted. lubricant 5W-30