All 5X112 factory, suggested, and acceptable wheel sizes are suitable for BMW vehicles.
Despite the fact that this data was obtained from the websites of the automobile manufacturers, our catalog only acts as a guide and makes no claims regarding the accuracy of the suggested sizes for your vehicle.
In This Article...
5×112 bolt pattern What automobiles include a 5×112 bolt pattern?
The stud count (5×112) and bolt circle measurement (112), the notional circle determined by the studs’ centers, make up the 5×112 Bolt Pattern or Pitch Circle Diameter (PCD).
What bolt pattern is employed by BMW?
These 5×120 to 5×112 PCD adapters are made to convert your PCD from 5×120 to 5×112, and they just snap onto the current wheel hub on your car. These M14x1. 5 threaded, 45mm thick PCD hub adapters will reduce the center bore of your car from 72.5mm to 57.1mm.
What BMW 328i has what type of bolt pattern?
Porsche Cayenne PCD Guide Although the 5×120 PCD is common to all current 3 Series models, it is important to keep in mind that certain models may require different-sized wheel bolts.
Has BMW adopted 5×112?
The notional circle for the 5×112 Bolt Pattern or Pitch Circle Diameter (PCD) is determined by the center position of the studs, and it is composed of the number of studs (5) and the bolt circle measurement (112).
What is the 328i’s bolt pattern for 2007?
The bolt pattern on a 2008 BMW 328i is 5×4.72 or “5 on 4.72,” which means that each of its wheels has five bolts placed in a circle with a diameter of 4.72 inches.
What car has a bolt pattern of 5×120?
BMW wheels are actually a 5×120 while Mercedes wheels are actually a 5×112, according to the m6 reps. They will appear much nicer than any MB wheels, and the core design will remain the same.
What size bolts go on BMW wheels?
Acura, BMW, Buick, Cadillac, Chevrolet, GMC, Honda, Land Rover, Lexus, Pontiac, Tesla, and Volkswagon are examples of common automobiles with a 5×120 bolt pattern. This is what? Find a list of automobiles having a 5×120 bolt pattern using the table below.
The BMW 3 Series has what kind of studs?
No OEM VW will fit your BMW, regardless of the eccentric spacers (conversion from 5×112 to 5×120). For this reason, all current VW applications have a center bore of 57.1 mm, but the norm for BMW is 72.56 mm. A 72.56 mm hub cannot accommodate a wheel with a 57.1 mm center bore.
What size wheels come on a BMW 328i?
As many of you are aware, BMW changed their bolt pattern (PCD) to 5×112 from 5×120 with the launch of their newest vehicles, including the G01 X3, G30/31 5 series, G32 6 GT, and G11/12 7 series, after about 40 years.
BMW rims can they be switched out?
The most popular Mercedes-Benz bolt pattern is 5×4. 41 (sometimes spelled 5×112), which designates that each wheel has five lug holes arranged evenly around a circle with a diameter of four-point-four inches.
Do Audi wheels suit Mercedes vehicles?
Fortunately, any car has a replaceable rim available. All you need to do is make sure the new wheel’s bolt patterns, size, and offset match those on the old one. By looking at the sticker label on the inside of the driver’s door or measuring the rim, you may determine the new wheel’s proper size.
Which wheels from different cars will suit your car?
On a Mercedes, how do I install BMW wheels (HRE)? This is not accomplished by the bolt. Because it is a thick spacer, it may simultaneously have the BMW and Mercedes bolt pattern drilled into it. Thus, after attaching the spacer to the vehicle (10 total lugs and bolts), the wheel is next bolted into the spacer.