Look for your BMW color code label under the driver’s door jam or under the hood of your vehicle. The areas that are most likely are:
- Under the hood on the driver’s side
- close to the strut towers
- The edge of the fenders
- in the driver’s door jam on the vehicle identification number (VIN) sticker
In This Article...
How can I locate my car’s paint code?
You’ll need to look in a few different areas to identify the color code on your BMW. The most frequent locations are shown below, although they may differ depending on whether you have an X5, 3 Series, or 5 Series, so make sure to check on:
- the right-hand side of the hood’s underside
- The tower with the right-hand strut
- Lastly, inspect the fender’s edge.
On a 2012 BMW, where is the paint code?
Select the Color of Your BMW (Step One) The color code can be found on the firewall, the passenger side wheel housing, or underneath the bonnet near the front strut tower.
Where is the paint code on the BMW VIN?
The vehicle identification number (VIN) label on the driver’s side door jamb is the most popular place to find your paint code. Check beneath the hood close to the strut tower if you can’t find anything there. A
The code is often a three-digit number, although it can also be four or five digits or alphanumeric. The paint color will frequently be written in either German or English on the sticker’s label. A
You can also use a number of online tools, like this list, to decipher your paint code.
The BMW 5 Series paint code is where?
BMW codes are tucked away on the vehicle, and discovering them might be challenging. Why did BMW make it so difficult? BMW color codes can be found on the radiator support, the firewall,
that plate. So the secret is patience. The year, make, and model of your car are
Where the BMW Paint Code is located on a Color ID Tag:
The color code for the aforementioned color ID tag is 300. BMW typically uses a three-number color code, like 300. Typically, a forward slash is followed by additional digits that are not part of your color code.
The color code 300 in the aforementioned example stands for:
For instance, we refer to 300 above as Alpine White III Clearcoat. It may also be known as
Which paint manufacturer does BMW employ in its factories?
In 44 of the markets where BMW conducts business, Glasurit(r), BASF’s premium refinish brand, continues to be a suggested supplier of paint solutions. In 2020, all BMW authorized dealers and body shop networks will be able to refinish paint repairs on BMW and Mini vehicles using Glasurit.
The agreement covers the innovative bodyshop management systems and the dynamic paint, training, and digital color solutions portfolio of the Glasurit brand. According to Uwe Bauschulte, Global Key Account Management BMW Group, BASF Automotive Refinish Coatings Solutions, “This new arrangement with BMW shows proof of Glasurit’s overall strength and reputation as a trusted business partner.” “We are convinced that the high standards of BMW’s devoted automobile buyers will be met by our complete paint and color knowledge.”
In the same time frame, BASF is authorized to supply BMW’s ColorSystem refinish paint system in specific Asian Pacific regions, including China and Japan.
Glasurit waterborne solutions provide great hiding power, simple application, and ideal process times for any vehicle and every color. The Glasurit 90 Line series is a top option among automotive coatings for solid, metallic, and special-effect colors, and it always provides the best refinishing solution.
Glasurit will train the spray painters and owners of BMW’s body shops in the use of its cutting-edge “Glasurit Know-how” online learning platform in order to maximize the brand’s color excellence and make sure that BMW body shops can provide their clients with the greatest refinish results. In Glasurit Know-how, you may find production details, technical data sheets, e-books, and more than 100 training videos that address typical body shop inquiries. No matter what the process entails—spraying pressure, temperature, proximity to the object, or paint system—Glasurit professionals thoroughly explain each step and break it down into manageable steps. “Every BMW body shop painter worldwide has access to world-class and reliable training thanks to the premium learning platform Glasurit Know-how. As the agreement spans 44 markets worldwide, it is crucial that our customers can reach us whenever they need to, from anywhere in the world, regardless of the job or color they are working on “the head of global marketing for Automotive Refinish Coatings Solutions, Fabien Boschetti, stated.
Glasurit provides a variety of digital color management technologies, including the integrated Color Profi System, as part of its comprehensive offer to BMW. With Glasurit’s RATIO Scan 12/6 next-generation handheld spectrophotometer, which accurately measures and adjusts the color on the car fast and effortlessly, millions of color formulations may be recreated quickly, conveniently, and practically.
BMW advises Glasurit automotive refinish paints in the following markets and areas in Asia Pacific:
Under the Glasurit brand, BASF sells a wide selection of automobile refinishing paint solutions with a focus on high-solids and eco-friendly waterborne basecoats. The products fulfill the same quality criteria as solvent-borne paints in terms of look and durability when employing these systems, and all regulatory solvent-reduction requirements can be met globally. The business provides a wide range of services in this field to help its clients. Most of the world’s top automakers have chosen Glasurit Automotive Refinish Paints for their aftermarket repair needs due to its competence in color.
How many paint layers does a BMW have?
Every vehicle receives two protective corrosion coatings, sealant, primer, basecoat, and clear coat at the BMW paint facility, which is around 700,000 square feet in size.
Is the paint on BMW soft or hard?
My e90 M3 AW has some noticeable swirl marks all over it. I have Meg’s swirl remover and Griot’s Machine Polish 3. Only twice have I washed and fast sprayed it down. Soon, I’ll be performing a complete iron-x, clay, swirl removal, shine, and wax.
I’ll start by using the GG machine polish 3 with a Griots Orbital, an orange pad, and a verify the results because I know it’s largely trial and error. If I don’t achieve the desired results, should I try again with the same products or switch to a stronger remover? Is Griots 3 stronger than Meg’s swirl remover?
BMW’s paint is regarded as being soft, although it is not single-stage paint soft. Even with the most vigorous pad and compound, it still required many passes when I recently corrected some paint. If you’re attempting a one stage correction, you can also combine chemicals.
I would go up if it appeared unmolested after one pass. However, if it gets better, I’d make another 1-2 passes.
Definitely +1. I use and adore several of Griot’s goods. However, I’ve switched to Rupes “Bigfoot” for paint correction from the Griot’s orbital (which is just branded in any case). It is a superb tool. It is offered by several Forum merchants.
I’ve never used either of those polishes before. However, in my opinion, Meg’s Swirl Remover is more of a cleaner/filler and has virtually any cut, whereas Griots Machine Polish 3 is very light.
Of course, everything depends on how much adjustment you require. I would increase the type of polish if you are using an orange pad with proper technique and pressure and still aren’t obtaining the desired results.
I recently polished my AW e90 and upgraded to Menzernas fg400 compound after some trial and error. The less abrasive polishes, I discovered, weren’t providing the correction I desired. In addition, I planned to cut back on my working hours…
My AW E93 paint is hard in comparison to my F350, my grey and black Nissan Titans, and my white Armada. I regularly fix swirls and spider scratches on my other vehicles using a Porter Cable DA with an orange pad and medium cut compound (Maguires D300 or Maguires cut compound), but I was unable to get the desired cutting motion. About half of the minor spider scratches were repaired, but none of the deeper ones. I had to switch to the old rotary (which I don’t use very frequently because it’s a Makita tank and I’m old) to remove the deeper damage. To get a flawless surface before applying sealant and wax, I next used the DA with a lighter pad and polish.
It’s difficult, in my opinion and based on my experience, but I suppose it all depends on the individual. Probably could have obtained that with an additional two or three DA passes.
What is the price of painting a scratch on a BMW?
For every one of the aforementioned types of automotive paint damage, there are probably mobile technicians available close to you. The least expensive choice will be a mobile technician, and they will travel to you!
You’ll pay between $150 and $250 for all of the minor paint chip, scratch, and scrape repair they can do for your car. For little, superficial chips and scratches, touch-up works great. Each panel will cost roughly $75 to repair dents.
Although touch-up repairs won’t necessarily make your automobile appear brand new, they will cost lot less and look much better than body shop work. They should endure for as long as you own the automobile and will prevent the damage from getting worse. Find a painter who uses the Dr. Colorchip technique if you need your paint repaired! (To see why we only use Dr. Colorchip paint, see our blog post here.)
On a VIN number, where is the paint code located?
The VIN on your automobile can tell you a lot about it, but it can’t tell you what color it is. Where can one find car paint color, then?
Most cars include a list of color codes in the driver’s door jamb. There is usually a tag there that contains details about the car, including the color of the paint. These placards list two paint codes: an interior paint code and an external paint code, which are occasionally referred to as “trim” and “paint,” respectively.
The paint codes can occasionally be more challenging to locate. Check your owner’s manual if you can’t find any information on the paint code in the door jamb. The location of the color code signs is typically indicated, eliminating the need for guesswork.
What are the BMW’s three colors?
Designer Seehaus, who was a member of the team in charge of it, was the one to develop the blue, violet, and red BMW M colors. “Blue represents BMW, red represents motorsport, and violet represents the special union of the two.”
What color BMW models are most popular?
One of the most popular colors for BMW cars is blue, yet blue is never just “blue.” Instead, you’ll find, to mention a few, Mystic Blue, LeMans Blue, and Interlagos Blue.