I haven’t examined a modern 5-series, but typically a BMW battery is located underneath the plastic tray on the right side of the trunk. If you can’t find it there, it might have been relocated from the 1980s 5-series to the area behind the back seat.
I believe the new 5-series follows the same methodology as Mercedes has for a while. In other words, they communicate the end-points to the windows, sunroof, seats, mirrors, etc. via electronic memory rather than mechanical stops. This means that if the battery is disconnected, it will be difficult to reset the stops on anything. It is best to prevent that issue by connecting an additional battery to the jumper cable connectors under the hood to keep the vehicle powered while you are changing your battery.
I believe that in order to service the air bags, you must shut down the entire system, therefore you will need the owner’s manual for instructions on how to reset everything with a memory.
In This Article...
SERPRESULT
99, H7 DIN Group Size, Top Left Front Negative Terminal, 150min Reserve Capacity, 85Ah Amp Hour Capacity at 20 Hours
In BMW E60 vehicles, the battery is concealed under a trim panel on the right side of the trunk.
Where can I find BMW batteries?
The majority of brand-new BMW vehicles are constructed with their batteries in the trunk, unlike practically all other vehicles. Now that we’ve cleared things out, learning how to remove a car battery won’t take much time: Under the upholstery that covers your trunk, the battery is often found on the right side of your car.
How is the flat battery on a BMW 5 Series opened?
Open the ski hatch, and then using a stick or something similar, push on one of the seat releases in the trunk through the hatch to fold down the back seats. Fold the seats down after they have been freed, then reach or squat into the trunk to pull the emergency release cord that is attached to the lid of the trunk. It functioned for me.
Is the 2008 BMW 528i subject to a recall?
Vehicles from the 2008, 2009, and 2010 model years of the 528i, 535i, 550i, and M5 have been voluntarily recalled by BMW. A bulletin published by the National Highway Traffic Safety Administration states that 134,100 vehicles produced between March 1, 2007, and December 31, 2009, are subject to the recall.
The electrical system that powers the lights at the back of the car, including the tail, brake, turn-signal, and reverse lights, is the area of concern for the recall. Over time, the ground terminal and housing connected to that system may sustain damage, which means the lights could occasionally malfunction. And as you might expect, accidents may happen quickly when a crucial component, like the brake light, breaks down.
The problem can be fixed by BMW by changing the rear lamp bulb carriers. The manufacturer is already getting ready for the fixes and anticipates notifying owners of the recall in October.
Owners of the impacted vehicles are invited to get in touch with BMW customer service at 800-525-7417 or [email protected] in the interim. You can also contact NHTSA by phone at 888-327-4236 and inquire about recall campaign #13V407000.
A BMW 528i can be jumpstarted, right?
How to jump start a BMW 528i is as follows: To jump start your dead car, first locate a functional vehicle or a car battery. Open the hoods of both automobiles after turning them off. The positive battery connector on your BMW should receive the red positive cable.
How can you tell whether your BMW requires a new battery?
- lowering the headlights.
- a greater demand for jump starts or engine revving.
- When you turn the key or press the button, the engine starts more slowly.
- abnormal power variations
Which issues does the BMW 528i have?
Drivers of the 5 Series are guaranteed to discover oddities and flaws that need to be repaired after more than 40 years on the road. The most frequent BMW 528i repairs in Austin, based on what we’ve seen customers bring in to our shop, are:
- worn tension struts that allow the front suspension to be loose
- leaks of coolant in the water pump
- leaks in the radiator’s coolant
- engine overheating brought on by a broken thermostat
- incorrect hydraulic valve lifters
- leaky valve cover gasket
- blower final stage fan resistor failure
- The power steering hose is leaking fluid.
Why is the battery in the trunk according to BMW?
Instead of the more conventional engine-bay-mounted battery, the majority of BMW vehicles use a trunk-mounted battery. Because of the constrained engine bay space (a powerful engine must fit into a tiny space) and the need to maintain a weight distribution that is as close to 50/50 as possible.
Are there two batteries in a BMW?
Each of them has two batteries. Given that you don’t seem to own an E31, it’s kind of ironic that you titled your piece “You Own,” emphasizing the word.
Can I change the battery in my BMW myself?
Do you not adore your BMW? And you intend to continue using it for as long as possible, right? Change your oil, replace your air filters, and do other routine maintenance on your BMW as needed to ensure its longevity. Maintaining the battery in your BMW, however, is the one item that contributes the most to flawless operation of your vehicle.
However, a lot of individuals ponder whether BMW battery replacement and registration are straightforward do-it-yourself tasks or require the services of a qualified specialist. We affirm that you can manage the replacement on your own. However, if you lack computer literacy, let us handle the registration process on your behalf.
Here, we’ll go over how to install a battery in a car, examine BMW battery registration in further detail, and provide additional information on the BMW battery reset process.
What occurs if the battery in a BMW dies?
After you turn off your BMW, your battery continues to run for a while. After you leave, it will continue to run your radio, lights, clock, and even the security alarm for the car. Electrical issues with your BMW could cause some components to turn off while others, like your lights, remain on, draining your battery. When you leave your BMW, make sure all electric components are turned off.
Can a BMW battery be used to jump start it?
Following the positioning of both vehicles, here is how to jumpstart a BMW: Determine the positive and negative terminals on each battery by removing the covers. Connect the first red clamp to the red (positive/+) connector on your BMW car. Connect the second red clamp to the functional battery’s positive terminal.
A dead BMW battery can it be recharged?
BMW advises using the jump start connectors under the hood to charge the battery. Connect your charger at this time, with the red clamp in front, and start slowly charging the battery. It can take up to 24 hours for a dead battery to fully recharge. While the battery is charged, do not leave the key in the ignition.
Disconnecting the battery from the vehicle and bringing it to a charging station (also known as a battery charger) in your garage or home to wait for a complete charge is an additional charging option. A full charge indicator would typically be seen on the battery charger.
Can you use the trunk to charge a BMW battery?
My installation is in the trunk. It’s usually preferable to have the charger as close to the battery as feasible when it comes to charging. The negative lead should be linked to the chassis, not the battery, and the positive lead should be attached to the battery terminal.
On a BMW, where do the jumper cables go?
It’s crucial to connect the jumper cables in the proper sequence: Connect one of the red clamps to the deceased vehicle’s positive (POS / +) terminal. The positive terminal on the operating vehicle should receive the other red clamp. Connect one of the black clamps to the working vehicle’s negative (NEG / -) connector.
After a jump start, how do I reset my BMW?
Here are the instructions so that you can see how crucial the BMW computer reset is after reading the preceding explanation.
- Once the lights and radio are turned on, first switch the ignition key of the BMW automobile to the accessory position. This must be completed prior to starting the car. Then, hold down the “Trip” button on the instrument panel for a few seconds until the red light appears.
- Once more, press and hold the “Trip” button until Reset appears.
- Press the same button a third time after that. The BMW computer will quickly reset now.
BMW automobile battery replacement and computer reset are both inexpensive procedures. The sooner you complete this, the easier it will be for you to operate your BMW vehicle. Despite all of these facts, this surgery should not be taken lightly. There are auto repair shops with qualified experts who adhere to the manufacturer’s warranty guidelines. To receive a safe and secure service, consult these businesses.
How can you jump start a BMW?
- Connect one of the red clamps to the positive (red) terminal on your own BMW vehicle.
- Connect the other red clamp to the helping vehicle’s positive (red) terminal.
- Connect the negative (black) terminal of the assistance vehicle to the black clamp.
Is jumping a BMW safe?
DO NOT let any roadside assistance agency install a new battery in your BMW, and DO NOT jump start the vehicle. It might cost more than any other battery or jump start you’ve ever purchased.