The bolt pattern of a 2011 BMW 328i is 5×4. 72, sometimes known as “5 on 4.72.” This indicates that there are five bolts on each of your BMW’s wheels, each of which has a 4.72-inch diameter circle.
In This Article...
What is the wheel bolt pattern on a 328i BMW?
The wheel bolt pattern for the 2018 BMW 328i is 5 X 120mm, which fits a typical 17-inch rim. The PCD, or pitch circle diameter, is the bolt pattern for a wheel. The fact that every BMW has precisely 5 lug bolts aced in a 120 mm bolt circle might be useful. Additionally, there are exactly the same amount of bolts in an 8 mm circle.
Bolt pattern for the BMW 328i xDrive Sedan Sport Line
The bolt pattern on the 2015 BMW 328i xDrive Sedan Sport Line is 5-120 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 120 mm (4.72 inches).
You should measure from the center of one lug to the outer edge of the lug farthest from it in order to obtain an accurate measurement of your five lug bolt pattern without the use of a bolt pattern tool.
Porsche Cayenne PCD Guide
Early BMW 3 Series cars, such as the E21 and E30, used a 4×100 PCD. Later models, however, moved to a 5×120 PCD, which has now become standard across the whole BMW lineup and is referred to as “BMW fitting.”
Although the 5×120 PCD is common to all current 3 Series vehicles, it is important to keep in mind that alternative wheel bolt sizes may be needed depending on the specific model. While F series cars (F30, F31, F34, and F80) need M14 wheel bolts, E series BMWs (E21, E30, E36, E40, E90, E91, E92, and E93) accept M12 wheel bolts.
There are PCD hub converter kits available that fit over your current wheel hub and enable you to utilize wheels with different PCD patterns on your car if you want to install a modern wheel with a 5×120 PCD on an early 4×100 3 Series model.
How many lugs does a 2008 BMW 328i have?
The bolt pattern on a 2008 BMW 328i is 5×4.72 or “5 on 4.72,” which means that each of its wheels has five bolts placed in a circle with a diameter of 4.72 inches.
A BMW 325i’s bolt pattern is.
What is the BMW 325i’s bolt pattern from 2006? The bolt pattern on a 2006 BMW 325i is 5×4. 72 or 5 on 4.72, which simply means that each wheel will have five bolts placed in a circle with a diameter of 4.72 inches.
What is the 328i’s bolt pattern for 2007?
What is the bolt pattern for a 2007 BMW 328i? A 2007 BMW 328i has a bolt pattern of 5×4.72 with five bolts in a circle with a diameter of 4.72″.
The BMW 3 Series has what kind of studs?
Porsche Cayenne PCD Guide Although the 5×120 PCD is common to all current 3 Series models, it is important to keep in mind that certain models may require different-sized wheel bolts.
A BMW 328i can fit what size wheels?
For instance, the Sedan 4D 4 Cyl. Turbo version of the 2016 BMW 328i features tires measuring P225/50VR17, but the 2013
tread. It is expressed as a percentage. Low profile tires have a lower number, and high profile tires have a higher number.
Do Mercedes and BMW share the same bolt pattern?
The Tire Rack sponsors the Wheels and Tires topic. By purchasing tires from the above link, you can directly support e90post. For each purchase made using the link, e90post receives sponsor funding to maintain the website. Disclaimer
Hey guys, I’m not too knowledgeable with rims. My question was whether the 2009 E63 AMG rims would fit on the 335i coupe because I have no idea how the sizing works.
Simply purchase the M6 Reps, which have the same basic design but look significantly nicer. AMG Eff
Beemercedes. Interesting, huh? I never anticipated hearing that (the Mercedes component on BMWs). However, I’ve seen Toyotas with VTEC insignia. or Fords with Mugen decals. I’ve seen Hondas with Isuzu engines. Maseratis with Ferrari powertrains. I’ve even seen Honda motors in Saturn Vus! Nissan employs the electric motor from Toyota. Did you know that it was possible to practice Scientology and be a Christian at the same time? BUT that’s false dude, I’ve never seen Mercedes wheels on a BMW!
What automobiles have Mercedes’ bolt pattern?
What Vehicles Share Mercedes’ Bolt Pattern? The standard bolt pattern for Mercedes vehicles is 5 x 112. For luxury car brands like Audi, Volkswagen, Maybach, and Chrysler, this is a typical bolt pattern.
What vehicles have a bolt pattern of 5×115?
Many fantastic cars, including Buicks, Cadillacs, Chevrolets, GMs, Chryslers, Dodges, Pontiacs, and more, come with wheels with a 5×115 bolt pattern. 5×115 wheels may enhance the appearance of any vehicle, whether you’re driving a polished ride that exudes high-end elegance or a traditional American muscle car.
What automobiles have a 5×114-3 bolt pattern?
Honda Civic or Mazda Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3 are the most popular vehicles with PCD 5×114,3.
A 5×112 bolt pattern: what is it?
The stud count (5×112) and bolt circle measurement (112), the notional circle determined by the studs’ centers, make up the 5×112 Bolt Pattern or Pitch Circle Diameter (PCD).
Which automobiles have a 5×120 bolt pattern?
Acura, BMW, Buick, Cadillac, Chevrolet, GMC, Honda, Land Rover, Lexus, Pontiac, Tesla, and Volkswagon are examples of common automobiles with a 5×120 bolt pattern.
- Honda MDX (2007-2013)
- Honda TL (2009-2014)
- Honda NSX (2016-2021)
- 1 Series BMW (2014-2020)
- 2 Series BMW (2013-2021)
- 3 Series BMW (1986-2019)
- 4 Series BMW (2013-2021)
- 5 Series BMW (1972-2016)
- (1976–1990) BMW 6 Series (2003-2019)
- 7 Series BMW (1977 – 2015)
- 8 Series BMW (1990-1999)
- BMW M1 (1978-1981) (1978-1981)
- BMW M2 (2015-2021) (2015-2021)
- BMW M3 (1986-2018) (1986-2018)
- BMW M4 (2014-2020) (2014-2020)
- BMW M5 (1985-1995) (1998-2017) (1998-2017)
- BMW M6 (2005-2010) (2012-2018) (2012-2018)
- Acura Allure (2010)
- Cadillac Lacrosse (2009-2016)
- Bugatti Regal (2011-2017)
- Chevrolet CT5 (2019-2021)
- CT6 Cadillac (2016-2021)
- CTS Cadillac (2007-2019)
- Corvette Camaro (2010-2021)
- Corvette by Chevrolet (2020-2021)
- Cadillac Equinox (2010-2017)
- CORVETTE MALIBU (2012-2018)
- Terrain GM (2010-2018)
- Civic Type R Honda (2015-2021)
- Honda Accord (2005-2021)
- Discovery 2 Land Rover (1998-2004)
- Discovery 3 Land Rover (2004-2009)
- Range Rover by Land Rover (1994-2021)
- Toyota LS (2006-2021)
- G8 Pontiac (2008-2009)
- S-model Tesla (2012-2022)
- Ford Model X (2015-2021)
- Renault Touareg (2003-2010)
Can 5×114 3 fit 5×120?
The fact that 5×120 to 5×114.3 wheel adapters can only fit on 5×120 vehicle hubs and convert 5×114.3 wheels is crucial to understand. To avoid wasting time or money, conduct some research before starting the project. Most of the time, you can quickly check the bolt pattern in your owner’s handbook or on Google by entering the model and year. However, there might be some exceptions, particularly if you don’t know the new wheels’ PCD.
It is best to measure the lug pattern size yourself, however. Choose one lug hole on a 5-lug wheel as your starting point, and then use a ruler to measure from the edge of that hole to the center of the hole next to it (skip the one bolt hole). The bolt pattern would be 5×4.5″ or 5×114.3 if the bolt pattern circle diameter is 4.5 inches (114.3mm). Of course, you can get help from your neighborhood auto shop.
Fit 5×120 inside 5×115?
To put 5×115 bolt pattern wheels on hubs with a 5×120 bolt pattern, a wheel adapter set is required. To give you extra room for wider tires and rims, they will space out your wheels by an inch.
A 5×120 can it fit a 5×112?
These 5×120 to 5×112 PCD adapters are made to convert your PCD from 5×120 to 5×112, and they just snap onto the current wheel hub on your car.
These M14x1.5 threaded, 45mm thick PCD hub adapters will reduce the center bore of your car from 72.5mm to 57.1mm.
Please be aware that these 45mm PCD adapters will widen the track by 90mm overall; consider this before buying.
PCD hub adapters are perfect for anyone who wishes to change their vehicle’s PCD pattern and are especially popular with vintage car owners who want to suit their classic automobile with more contemporary wheels.
These PCD adapters are made by H&R in Germany from lightweight, high-strength aluminum for a safe and secure fit. They have also received full TUV approval.
How safe are wheel adapters?
Typically, wheel spacers are used to mount aftermarket wheels or bigger tires on cars. These additions, which are often composed of steel or aluminum, fit over the car’s retaining bracket, pushing the wheel out to give the car a more aggressive posture and greater space between the wheel hub assembly and the wheel.
Adapters enable users to place unique wheels on their vehicles, trucks, and SUVs similarly to how wheel spacers do. To alter the bolt pattern and enable the use of aftermarket wheels, these disks are installed on the wheel hub assembly.
How do ‘wobble bolts’ function?
PCD Variation Bolts is the correct phrase to use. The spinning washer collar on this kind of bolt is distinctive and sits above the threaded stud and below the hex. The 60 degree tapered collar has a 2.3 mm range of motion. The wobble bolt can revolve in its collar seat until the bolt is tightly fastened, for instance, if you have wheels that are BMW 5×120 PCD to put on to a Vauxhall Vivaro 5×118 PCD. The spinning collar is fixed and cannot move after the bolt has completed its final turn.