Hello, I recently purchased a 2017 CPO M240i, and it has a rather dark tint. I want it taken away. “70%” is written in the rear window letters. But it appears considerably darker. I have personally removed window tint from other vehicles, but this window tint is, in my opinion, practically too good to be an aftermarket installation. It is precisely shaped to fit the border of the opaque window. There is only a reference to a “S823A Hot-Climate Version” on the build sheet. Could the factory colour it for you?
Factory tint is not a choice that I am aware of. Most likely, the previous owner had a high-quality installation. Your automobile looks exactly like mine in the photo. On the four side windows, I have 50% 3M Ceramic tint.
I advise you to have someone to gauge the darkness before making a choice.
Those windows have the exact same shade of the normal hue that is included into the glass, straight from the manufacturer. The only choice is to sledge hammer those a-holes. Posting the film on YouTube might bring in some money, but probably not enough to cover the costs.
Going to a glass guy is the only way to find out. However, the fact that the front windows and the quarter windows have such distinct tints makes me skeptical. Although I am unaware of any aftermarket vendors who would make the automobile that way, that is how it leaves the factory.
Not OEM, that. It appears that the quarter glass is 20% and the entrance window is 35%.
That has the same proportions as my automobile, which has a 20% back and a 35% front. I also went to a top-notch shop, so the fit and finish are excellent; it’s difficult to tell if they were original options or aftermarket.
In most circumstances, if you visit a tint store and it has been applied, they could remove it for you.
It’s not like you can ask the previous owner because I’m assuming you purchased it used from a dealership.
You could always ask at a BMW dealership. The build spec may then be looked up using the VIN.
All BMW sedans and coupes (i.e., non-SUVs) are factory-installed with a 70% “tint,” which permits 70% light transmission. The glass is actually tinted to filter 30% of light; it’s not a film. No darker options are available when ordering a car. There is aftermarket tint on the car in the image.
In This Article...
Alpine300ZHP
Probably a foolish question, but I couldn’t find a definitive response when I searched online. For the first time in years, my new car is all-black, and I was considering adding some tint, primarily for heat reflection. Although I’ve heard wonderful things about ceramic tint, I don’t want to break any state regulations because, in my opinion, it’s not worth it. The store I spoke to has 70% film, which, IF there isn’t tint coming from the factory, would be legal in New York. I looked online and some sources claim that all factory automobiles have between 75 and 80%. (amount of light passing through). If so, the cumulative tint would be somewhere around 50%. Could someone verify it in either direction?
Tint cannot be installed on a BMW at the factory. How do I know this? A few years ago, my 435 coupe was stopped by the police. The vehicle had 30% tint (the maximum permitted in Florida is 28%). When the trooper used the tint meter to check the window, it showed that I was above the 28% threshold, therefore he released me. I’ve been informed that the SUVs have a 35% tint on the rear windows (behind the driver’s seat), which is permitted in all 50 states.
What is the price of tinting a BMW window?
Always, there are two essential ideas. the tint film you select, first. The second is the installation hub. Consider window tinting as an investment, is our recommendation. an investment in the security of you, your family, and your vehicle.
Glasstint offers high-end movies and services. Because of this, some individuals may believe that the service is costly. However, after using our service, a customer always returns to tint their next vehicle. They also consistently refer us. There must be a justification.
What is the BMW’s standard tint?
Factory rear window tint is 20%. My component rears were 18.5. Surprisingly, the fronts were 75. To balance the light coming through the windshield, I believe I moved 15 ahead; it matches nicely.
What color is privacy glass manufactured with?
Both factory-installed and aftermarket window tints appear identical at first glance, but there are a few ways to distinguish between these two types of tinting a car window.
Whether you want car window tinting or already have tinted windows on your vehicle, the decision is yours.
By using an electrical technique called deep dipping, which entails coloring the inside of the glass with dark pigment, the window is darkened to around 20% VLT (visual light transmission) 80% tint.
There are no shade options; you either have them or you don’t. The pigment has no UV filtering, antiglare, or heat reducing qualities, and it cannot be reversed or removed. They provide only cosmetic functions.
How a car window is aftermarket tinted:
The actual film is composed of a printed sheet of a particular color dye that comes in these various percentage shades of black or carbon, 5% 20% 35% 50% 70%
The film is then laminated with an anti-scratch coat on the front for protection, an adhesive layer on the back for attaching to the glass using soapy solution, and a rubber squeegee to ensure a finish free of bubbles.
To provide a smooth finish and prevent any edges from catching the rubber seals surrounding the automobile window, it is then filled along the edge of the side drop windows.
So how do the costs of window tint film and privacy glass compare?
For instance, a saloon car’s factory-installed rear windows would cost about PS600.
Compared to the saloon’s cost of PS165 for a rear aftermarket tint film.
Other comparison points:
Not to mention the anti-glare qualities of the automobile tints, window tint film has the advantages of reducing heat by 40% and UV by an astounding 99%. This is not a feature of factory-made privacy glass.
Additionally, there are options for the film’s color and its VLT characteristics:
for complete discretion in the backseat. – 20% – Also known as midnight film or dark smoke. It is without a doubt the most widely used window tinting color. To put it simply, it looks the greatest, which is why the factory-installed windows are dyed to this color. As with the 5%, you wouldn’t be able to notice a laptop or bag left on a seat if you went past the car on the street from a security standpoint. Smoke, sometimes known as 35%, is a nice-looking light colour. Despite the fact that you can see the objects on the back seat,
would keep the glass together, preventing thieves from breaking it to steal the valuables. 50% – Only barely perceptible shade. 70% – extremely slight, hardly perceptible
Can a BMW lease be tinted?
It will be my first time renting a car, therefore I’m wondering if I tint the windows by someone else BMW, will there be a problem at the conclusion of the lease and whether I’ll have to take the tint out. I am aware that I can have it done at BMW, which would be fine, but the cost might be exorbitant.
Window tinting has never been a problem for me when I’ve been leasing a car, and I’ve never had a dealer install it. Most people want tinted windows so the car’s value won’t be diminished when you trade it in.
Technically, I think you’re supposed to bring the car back without anything in it. My friend had to remove the tint from his rented E60 M5 before returning it. Dealers may, however, differ slightly.
I believe it is technically true, but in FL, the majority of people tint their windows, and CPO vehicles are available with tint, thus it is much less likely to be a problem than in some other regions of the nation. If you tint the glass more than is permitted, there might be an exemption, but even so, it seems dubious in this case.
I’ve now leased six vehicles, at least. Each has been tinted. Although I didn’t end up returning every one of them at the conclusion of the lease (some were sold, changed out of, etc.), I haven’t encountered any problems.
On my previous vehicle (a 2011 335 ix coupe), I was assessed a $250 fee for extra wear and tear. The car had tints, black kidney grills (I had lost the factory ones), and curb rash on one tire when I turned it in.
As long as the tint complies with the requirements of your state’s automobile code, you won’t encounter any problems. Stick with 30–35% tint and you’ll be OK because Florida is 28%.
If the tint was not applied by BMW, the dealer would often request that you remove it during a lease return.
Cars are not tinted by BMW. No matter who installs the tint on your car—the dealer, a third party, or you—it is still tint. The only issue with turning in a car with tint is that if the tint is too dark or fails an inspection, the dealer might not be able to sell the car.
Can the factory tint be taken off?
A automobile window’s factory tint cannot be removed since the glass has been combined with the dyes and pigments. Aftermarket tinting film can be peeled off of the glass with the help of tools, and solvents can be used to dissolve the adhesive coating.
BMW privacy glass – what is it?
PRIVACY GLASS: WHAT IS IT? Privacy glass is a unique sort of glass that has been darkened at the factory by the car maker and is frequently referred to as “factory tint.” The glass is colored instead of utilizing a window film, and it often has low heat rejection capabilities.
Most factory tint is what percentage?
Describe factory tint. As the name suggests, it is the factory-installed original coloration on a car’s windows. However, more and more cars now feature darker side windows. It is typically used on the back window.
More so than protecting the interior of the car from ultraviolet (UV) radiation, this form of tint aids in privacy. Although the precise amount varies, very little window tint is typically used by automakers.
On most cars, the factory window tint percentage typically runs between 15% and 20%. This indicates that the windows (which are typically the rare ones) only let in approximately 15-20% of visible light and reflect 85-85% of it.
The original tint on the side windows was significantly lighter, anywhere between 70 and 80%, as you’ll observe. As a result, large windows also allow in more heat and light.
You can add aftermarket film over the factory tint to make the windows of your car darker. Measuring the factory window tint percentage of your car is crucial at this point. Ensure that the increased darkness on your automobile windows complies with any applicable local or state driving laws.
Is it possible to darken factory tint?
best outcomes
- Follow the legal restrictions on darkness. The laws of Western Australia permit 35%
- Consult a specialist: It requires a number of computations.
You’re better off consulting a specialist because film tint interact with light differently.
- Only darkness is an option. Because a cannot be removed
- Never apply tint on top of aftermarket tint. Adding to an already-existing aftermarket