Yes, the bike is used. I mistakenly believed the BMW V was just a 660 with a new paint job, but the only benefit of the BMW V 5 was that it could be controlled from a multi-control wheel!
So, may I say clearly that the redesigned dashboard on this bike includes a built-in SatNav holder?
If so, the Nav 5 is what I would choose because it interfaces with the thumb wheel to read back part of the bike data.
I would choose the Garmin Zumo 590LM if the model didn’t have a higher dashboard. The 590LM is the Nav 5’s more equivalent model, as Gerhard notes. The unit would be a solitary one, albeit a very good one, as it lacks the software to accept the data from the bike.
In This Article...
How can my BMW Motorrad Navigator V be updated?
- Activate Garmin Express.
- Decide which gadget needs an update.
- Then select Map Details. If your device does not have a map update subscription, skip this step.
- Navigate to Map Options.
- Install to Computer by clicking. NOTE: The PC will be setup with complete maps.
- Select “Continue”
How does BMW use GPS?
Only found in BMW vehicles, the infotainment system known as iDrive offers built-in GPS to drivers. Driving is easier because to iDrive’s various features and advantages. The BMW navigation system is among the best for a number of reasons, which are listed below.
How can my BMW Motorrad Navigator IV be updated?
If you still don’t have it, you can fill out the form on this page to acquire it right away.
- Files should be extracted from the SpeedcamUpdates zip archive. You can move on to the following stage of these installation instructions if the file you downloaded is not a ZIP file, which indicates that the file has already been decompressed.
You must utilize the POI loading application in order to transfer the speedcam database data to your BMW Motorrad Navigator IV device. Download it by clicking the next link. Software for POI Loader
- Utilize a USB cable to connect your BMW Motorrad Navigator IV gadget to your computer. Run POI Loader now. Choose the folder from which you previously extracted the files. Express Mode should be used to complete your installation. You’ll receive the data on your BMW Motorrad Navigator IV device.
- Select the target folder on your hard drive that includes the unzipped files for our database, as previously stated. You can now pick between Manual mode and Express mode.
- All parameters in this mode are provided by POI Loader. The Next button will deploy all speed cameras.
Keep in mind that you can freely customize your download. Gain access to the customer control panel and use the customization tool to get a speed camera database that is tailored to your requirements. If the size of the new update is too large for your device, you will use this utility. To your current set-up, you can add and remove data from various countries’ speedcams.
The BMW Navigator VI: Is it pricey?
In conclusion, the BMW Navigator VI can be the right choice for you if you own a BMW motorcycle and want a dependable GPS solution. It comes with a ton of fantastic features that no other BMW navigator for sale offers. Without a doubt, the BMW Motorrad Navigator portfolio is continually improving, and we are quite interested to see what the Navigator’s future brings.
Is BMW GPS reliable?
The market’s most user-friendly infotainment system is called iDrive. A wheel, a group of buttons, quick keys, and a touchpad are used to control it. Fast keys can be configured to perform the tasks you perform most frequently, such as dialing home, navigating to a certain location, or just saving your favorite radio stations. Time is saved, and driving is less distracted as a result. There is no waiting for screens to load, as we discovered that it functioned quite swiftly.
Even though you are familiar with the route, it is recommended to trust the BMW’s sat-nav system when you are traveling rather than your own judgment. Its outstanding traffic awareness will steer you clear of any jams.
Does the BMW mount fit the Garmin Zumo XT?
Since the ZUMO XT is equipped with the old BMW preparation after switching from the Navigator VI, you may install it on the BMW in just five minutes!
The adapter appears to be really well crafted, 3D printed, and robust. It changes the NAV VI’s previous 18 (or several) pins to the ZUMO’s current 2 pins. gives the ZUMO power and enables you to avoid purchasing a second NAV VI if you so choose!
Excellent, and while though some people may not think losing the whizz wheel is a good thing, I questioned how much I truly used the wheel. Very, very rarely, and I haven’t missed it at all, was the response.
A fantastic piece of equipment that is superbly constructed throughout, and if you have experienced NAV VI issues but were unable to replace your sat nav due to the BMW preparation kit, you may now!
My Garmin Navigator V has to be reset.
- Start by turning off and unplugging the appliance.
- Touch and hold the touchscreen’s lower-right corner to make a selection.
- Start the appliance.
- It will take about 30 seconds for the word “System” to show on the screen.
How can I get Google Maps to appear on my BMW?
Visit Google Maps in any web browser, log in using your Google userid, and then search for and select the “gear” icon. You may register your BMW with Google there by entering your BMW Assist user name and password.
Is Google Maps compatible with my BMW?
In your BMW, Android Auto access to smartphone applications (like Spotify, your calendar, and Google Maps) in your BMW that is safe and practical
What version of BMW iDrive do I have, and how do I know?
The iDrive system’s navigation is a crucial component that makes getting from A to B simple. But since roads and sites of interest constantly change, it’s critical to maintain your BMW’s GPS maps updated if you want to get the most out of your iDrive.
Many of the most recent BMW models include over-the-air (OTA) map updates, which use the vehicle’s integrated SIM card to automatically download the most recent map data. The procedure in these automobiles is comparable to updating your smartphone to the most recent iOS or Android version; all you have to do is restart your car after your iDrive has downloaded the data.
For vehicles that do not allow OTA updates, a manual upgrade is necessary. Previously, updating BMW navigation maps required changing a DVD holding the map data. More newer vehicles include built-in hard drives that hold the data, allowing you to update your map by overwriting the hard drive’s contents. You can accomplish this with BMW by connecting a USB stick with the updated map data to the USB port in your vehicle.
It’s a good idea to determine which map version you need, which relies on your iDrive system, before purchasing a new BMW map. Use the settings menu when your iDrive navigation is open to navigate to “Navigation system version,” where you can see the region, version, and year of your current GPS data.
A GPX file needs to be imported into my BMW Navigator 6.
Open the “Trip” menu, pick the tab “Planned Routes,” and then import the selected route as a GPX file into your BMW Motorrad Connected app. The “Route import” button can be found here.
Which GPS will fit in a BMW K1600GT?
Yes. The Navigator IV and Navigator V are completely compatible with the holder of the navigation preparation on the K 1600 GT / GTL.
The instrument cover on the K 1600 GT / GTL motorcycles manufactured before 2014 (part number: 46 63 8 546 302) needs to be replaced because the Navigator V has a larger display than the Navigator IV.
The Navigator V’s complete screen doesn’t become viewable until after that. The following component number can be used to get the matching cover for the navigation compartment: 46 63 8 546 367.
How can I get free map updates for my BMW navigation system?
Several times a year, changes to the maps are released. They are offered in the BMW Shop as a one- or two-year subscription. If you have a current subscription, you can use the BMW Update Manager to obtain the most recent refresh from the BMW Connected Drive portal and update your map data. You’ll need a 64GB FAT-32 formatted USB drive and the methods below to accomplish this.
- First, use the icon in the site top to connect into your My BMW Account. Go to “My Vehicles” by navigating.
- Choose the vehicle for which a map update is desired.
- Go to the “Map update” section. If a new map version is available, a notification will appear.
How can I update my Garmin GPS device?
Make sure your Garmin GPS gadget is connected to a computer before starting the update. To do this, take the gadget out of your car, truck, or motorcycle and turn it on. Connect the GPS to your laptop with a micro USB cable, then watch as the progress bar scrolls. If you’ve previously connected the device, prompts should start popping up right away. You might need to manually check in to your Garmin account before beginning if it’s your first time.
What features does the Garmin Zumo XT have?
Since it has been a while, Garmin has dominated the GPS market, and its Zumo series of products has been a fixture on motorcycle handlebars. The majority of Garmin’s motorbike line has been focused on the street, but the zumo XT, their most recent navi, includes a few new capabilities that make it more useful for adventure/DS riders off the paved roads.
The directions, a rubberized ball-mount system (compatible with RAM), an electrical power cable, and a mini-USB cable are all included with the Zumo XT in the box. Given the strong trend toward USB-C, this form of USB connection was unexpected, but I wouldn’t need it frequently because the navi can be hardwired into the bike’s electrical system thanks to a mount that comes with it. Given its military-spec drop rating and IPX7 water resistance, the zumo XT can also handle life on the handlebars.
The zumo XT is as simple to set up and attach as one could ever hope. The device also directs you through connecting to Wi-Fi, updating the maps and software, and downloading the Garmin Drive mobile app on your smartphone (needed for traffic and weather information). The most challenging aspect of placing the device was properly routing the power cord. Installing the Garmin’s mount arm and pairing Bluetooth with two different brands of helmet communicators were two tasks that I found to be simpler than I had anticipated. After opening the package, the majority of users should be prepared to bike within 30 to 60 minutes.
Garmin GPX files: What are they?
GPX files can originate from many different places and include information like routes, tracks, waypoints, and geocaches. These files can be imported into our BaseCamp software for computer evaluation before being sent to a compatible handheld Garmin device.
Is there a fee for software updates at BMW?
It costs nothing to update the software on your BMW through BMW ConnectedDrive. The iDrive software update from BimmerTech starts at $249.
There are three ways to update the software on your BMW iDrive:
- With the iDrive software upgrade from BimmerTech
- through the webpage for BMW ConnectedDrive
- by means of the BMW ConnectedDrive App
By 2022, BMW will have updated its software to version 21-07. The most recent BMW software updates will always appear on your BMW control panel and My BMW App if you wish to stay informed.