This fitting is referred to be “hub-centric.” 72.6mm is the standard center bore for BMW wheels. The hubcentric fit of your new wheels to the vehicle is crucial. Either a straight or beveled edge will be present on the center bore’s rear.
In This Article...
Bolt patterns and center bore for BMW:
The diameter of a circle traced from one bolt hole to the next and the quantity of bolt holes make up the bolt pattern. The PCD is another name for it. There are five lug bolts in a 120mm bolt circle on almost all BMWs. All G-chassis employ a 5×112 bolt pattern, which has the same number of lug bolts but is arranged in an 8mm tighter circle, starting with the G01 7-series chassis in 2009. Also using this specification are Audi, VW, and Mercedes. Our wheel experts inform us that the use of uniform bolt designs for German brands is a recent standardization among wheel and hub manufacturers.
The substantial hole in the center of the wheel is known as the Center Bore. This hole will fit snugly with a lip projecting from the hub and brake rotor when the wheel is mounted to the vehicle. Hub-centric fitting refers to how firmly BMW wheels are made to fit on this lip. The wheel will wobble and shake and may even fail catastrophically if it does not fit tightly against this lip.
Guide for BMW 3 Series Wheel Fitment
Early 3 Series cars from the E21 through E36 generations came standard with a choice of 14-inch or 15-inch wheels, whereas later versions starting with the E46 generation increased the size to 16-inch and 17-inch wheels.
Since 2004, larger 20-inch wheels have also been available, depending on the model, while 18-inch wheels have once again become a regular factory-fit option.
Most owners will want to upgrade to even larger 20-inch, 21-inch, or 22-inch wheels depending on their unique requirements and taste, although 19-inch wheels are generally the chosen wheel size for “modern” BMW 3 Series cars from 2004 onwards.
Can a Mercedes be fitted with a BMW wheel?
I have a set of 20″ alloy wheels that I have on my M3, and while I plan to sell the car soon, I’d like to keep the wheels so that I can use them on the new car I plan to purchase. I know that there are bolts available that will change the bolt pattern from one manufacturer to another; do you know of any that would change a BMW wheel (HRE P40 20″) to a Mercedes C-class? (C63)
This is not accomplished by the bolt. Because it is a thick spacer, it may simultaneously have the BMW and Mercedes bolt pattern drilled into it.
Thus, after installing the spacer on the vehicle, the wheel is then bolted straight into the spacer using 10 lugs or bolts altogether. I’m not sure if they have BMW to Mercedes adapters, but they would be useless given that they are typically 20 to 25 mm thick. The difference in offsets between your Mercedes and the extra spacer thickness will prevent the wheels from fitting.
With the use of an adaptor, 5-120 bolt pattern wheels can be mounted on 5-112 bolt pattern wheels.
These adapters are 20mm thick, though. The M3 typically has roughly 20+ offset, while the C63 typically has 40+ offset. Therefore, even if the bolt pattern issue was resolved, it would still be extremely difficult to mount the M3 wheels on the C63.
Can other vehicles be fitted with BMW wheels?
You could decide to upgrade the wheels on your cars at some point. However, you might not be aware of which wheels from other cars will fit your automobile.
Fortunately, any vehicle’s wheel can be used as a replacement. The original wheel should, however, have the same bolt pattern, wheel offset, and size as the replacement.
By looking at the sticker plate on your door, you may determine the appropriate size of the replacement. Measure the wheel or get guidance from an auto retailer for a suitable replacement.
By choosing the incorrect size wheel, you run the risk of harming your car’s suspension, wheels, and brakes. You could even need to stop at the petrol station more frequently for refills.
Fits a BMW with 5×112?
As many of you are aware, BMW changed their bolt pattern (PCD) to 5×112 from 5×120, after about 40 years, with the newest cars they’ve launched, including the G01 X3, G30/31 5 series, G32 6 GT, and G11/12 7 series. 5×112 wheel weights, sizes from other models, and tyre options are listed on the BMW 5-Series Forum (G30).
Do Mercedes and BMW share the same bolt pattern?
Wheels and Tires Forum Sponsored by The Tire Rack Please use the above link when making any purchases from The Tire Rack to directly support e90post. For each purchase made using the link, e90post receives sponsor funding to maintain the website. Disclaimer
Hey guys, I’m not too knowledgeable with rims. I’m not sure how the sizing functions. So I wondered if the 2009 e63 amg rims will fit on the 335i coupe.
Simply purchase the M6 Reps, which have the same basic design but look significantly nicer. AMG Eff
Beemercedes. Interesting, huh? I never anticipated hearing that (the Mercedes component on BMWs). However, I’ve seen Toyotas with VTEC insignia. or Fords with Mugen decals. I’ve seen Hondas with Isuzu engines. Maseratis with Ferrari powertrains. I’ve even seen Honda motors in Saturn Vus! Nissan employs the electric motor from Toyota. Did you know that it was possible to practice Scientology and be a Christian at the same time? BUT that’s false dude, I’ve never seen Mercedes wheels on a BMW!
What automobiles have Mercedes’ bolt pattern?
What Vehicles Share Mercedes’ Bolt Pattern? The standard bolt pattern for Mercedes vehicles is 5 x 112. For luxury car brands like Audi, Volkswagen, Maybach, and Chrysler, this is a typical bolt pattern.
What automobiles include a 5×114-3 bolt pattern?
Honda Civic or Mazda Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3 are the most popular vehicles with PCD 5×114,3.
What’s the offset of my factory wheels?
The distance between the mounting point of your wheel and the wheel’s center is known as your wheel offset. The literal “center” of the width of your wheel is the centerline. The 0 mm offset is another name for this centerline. This is significant to know because the offset of your wheels is always expressed in millimeters.
Any offset measurements you see on your wheels are in millimeters. Always take accurate measurements; failing to do so could have disastrous results.
Simply use a tape measure to measure between the center and the mounting surface once you’ve located the centerline (where the bolts are). A positive offset or a negative offset is anything that is above or below this line, respectively. Both of them have different meanings and affect your automobile and how it drives in various ways.
- It is a positive offset if you are measuring from the center and moving outward (toward the street side) of the car. At this point, the tire and wheel are closer to the car’s exterior.
- This is a negative offset if the measurement begins in the middle and travels inward toward your brakes and suspension. This gives the appearance of being more convex and dipping inward.
But what exactly are positive and negative offsets, and how do they affect your car?
What automobiles have a 5×120 bolt pattern?
Acura, BMW, Buick, Cadillac, Chevrolet, GMC, Honda, Land Rover, Lexus, Pontiac, Tesla, and Volkswagon are examples of common automobiles with a 5×120 bolt pattern.
- Honda MDX (2007-2013)
- Honda TL (2009-2014)
- Honda NSX (2016-2021)
- 1 Series BMW (2014-2020)
- 2 Series BMW (2013-2021)
- 3 Series BMW (1986-2019)
- 4 Series BMW (2013-2021)
- 5 Series BMW (1972-2016)
- (1976–1990) BMW 6 Series (2003-2019)
- 7 Series BMW (1977 – 2015)
- 8 Series BMW (1990-1999)
- BMW M1 (1978-1981) (1978-1981)
- BMW M2 (2015-2021) (2015-2021)
- BMW M3 (1986-2018) (1986-2018)
- BMW M4 (2014-2020) (2014-2020)
- BMW M5 (1985-1995) (1998-2017) (1998-2017)
- BMW M6 (2005-2010) (2012-2018) (2012-2018)
- Acura Allure (2010)
- Cadillac Lacrosse (2009-2016)
- Bugatti Regal (2011-2017)
- Chevrolet CT5 (2019-2021)
- CT6 Cadillac (2016-2021)
- CTS Cadillac (2007-2019)
- Corvette Camaro (2010-2021)
- Corvette by Chevrolet (2020-2021)
- Cadillac Equinox (2010-2017)
- CORVETTE MALIBU (2012-2018)
- Terrain GM (2010-2018)
- Civic Type R Honda (2015-2021)
- Honda Accord (2005-2021)
- Discovery 2 Land Rover (1998-2004)
- Discovery 3 Land Rover (2004-2009)
- Range Rover by Land Rover (1994-2021)
- Toyota LS (2006-2021)
- G8 Pontiac (2008-2009)
- S-model Tesla (2012-2022)
- Ford Model X (2015-2021)
- Renault Touareg (2003-2010)
A 5×112 bolt pattern: what is it?
The stud count (5×112) and bolt circle measurement (112), the notional circle determined by the studs’ centers, make up the 5×112 Bolt Pattern or Pitch Circle Diameter (PCD).
Can a 5×114 3 fit a 5×120?
The fact that 5×120 to 5×114.3 wheel adapters can only fit on 5×120 vehicle hubs and convert 5×114.3 wheels is crucial to understand. To avoid wasting time or money, conduct some research before starting the project. Most of the time, you can quickly check the bolt pattern in your owner’s handbook or on Google by entering the model and year. However, there might be some exceptions, particularly if you don’t know the new wheels’ PCD.
It is best to measure the lug pattern size yourself, however. Choose one lug hole on a 5-lug wheel as your starting point, and then use a ruler to measure from the edge of that hole to the center of the hole next to it (skip the one bolt hole). The bolt pattern would be 5×4.5″ or 5×114.3 if the bolt pattern circle diameter is 4.5 inches (114.3mm). Of course, you can get help from your neighborhood auto shop.
Fit 5×120 inside 5×115?
To put 5×115 bolt pattern wheels on hubs with a 5×120 bolt pattern, a wheel adapter set is required. To give you extra room for wider tires and rims, they will space out your wheels by an inch.
What does a bolt pattern of 5×120 mean?
The bolt circle dimension (120), the notional circle determined by the studs’ centers, and the stud count (5) make up the 5×120 Bolt Pattern or Pitch Circle Diameter (PCD).