European Concentrate Antifreeze/Coolant Pentosin-Pentofrost NF (G11) Silicate – 1.5 Liters (Part No. 8114117)
In This Article...
SERPRESULT
5 Year/150K Mile Protection* Zerex Antifreeze/Coolant G-05 Formula 50/50 PREMIXED 1 Gallon * Part number ZXG05RU1, SKU number 368286 (162)
Blue Concentrate Antifreeze in 5 Liters
Which kind of antifreeze is used in my 2008 BMW 335i?
The 2008 BMW 335i utilizes Blue 50/50 antifreeze. An engine will cause you a lot of problems. It may be necessary to tighten up a loose gasket right away. Oil leaks are possible and must be repaired as quickly as feasible. Engine difficulty could be caused by a spark plug that pops off. The overheating of the engine is a serious issue. This could result in car explosions and fires. There can be excessive oil use, necessitating an immediate oil change. You should replace your air filter every 15,000 to 30,000 miles. Every 60,000 miles the coolant needs to be changed. Unless it’s a copper spark plug, the spark plugs should be replaced every 100,000 miles or so. Approximately every 30,000 miles, a cooper spark plug needs to be replaced.
Nearby 2016 BMW 335i coolant services include other coolant services
What kind of cooling fluid does BMW employ?
No matter what type of car you drive, whether it’s a BMW, Porsche, Mercedes Benz, Audi, Mini, or Volkswagen, your car circulates a solution of water and coolant to dissipate the heat generated within the engine and prevent it from completely melting down (one notable exception are older Porsche models that are air and oil cooled and did not use water or coolant, but instead circulated a large amount of oil to dissipate the heat).
A Spectrum of Colors
Which coolant type is best for your BMW, Porsche, Mercedes Benz, Audi, or Volkswagen out of the many available options? The answer is the kind that was initially installed in your car. Your coolant may be green, pink, blue, yellow, or even clear depending on the manufacturer. All coolants are naturally transparent, and dye is used to give them color. It has no impact on the coolant’s chemical properties that each producer adds their own colour blend. Because the water in Europe is substantially harder than the water in the United States, European manufacturers prefer coolant that is phosphate-free.
Inorganic Acid Technology (IAT), Organic Acid Technology (OAT), and Hybrid Organic Acid Technology (HOAT) are the three most common coolant types available today. A HOAT coolant is used by your BMW, Porsche, Mercedes Benz, Audi, or Volkswagen.
In order to protect aluminum surfaces, silicate is added to OAT coolants to create HOAT coolants. The cylinder heads and radiators, as well as other parts of your BMW, Mercedes Benz, Porsche, Audi, and Volkswagen engine and cooling systems, are constructed of aluminum.
Silicate and phosphate corrosion inhibitors are not used in OAT coolants. These coolants are made to last for 150,000 miles and have a long service life (or 5 years). It should be mentioned, nevertheless, that German Auto Center and the majority of manufacturers advise cleansing or replacing the coolant every two years.
The metal (Iron) components of the engine and cooling system are protected by traditional coolants, which are IAT coolants and use silicate and phosphate corrosion inhibitors. IAT coolants shouldn’t be utilized because the majority of the iron components in your BMW, Mercedes Benz, Porsche, Mini, Audi, and Volkswagen have been replaced with aluminum and other lighter composites.
It’s crucial to keep in mind that modern German performance cars, whether you drive a Porsche, Mercedes Benz, Mini BMW, Volkswagen, or Audi, will last you for many miles and years if you maintain them properly. German Auto Center in Austin is the place to go for German auto repairs. We will be pleased to help you!
Which coolant does the BMW E90 employ?
In your cooling system, BMW’s blue G11 coolant is intended to encourage heat transfer and prevent corrosion. Nitrate and phosphate are not present in genuine BMW coolant. Be aware that before putting BMW coolant to the car, it must be diluted with distilled water to a 50:50 combination.
Do BMWs require special coolant?
In addition to controlling engine temperatures, the quality of your BMW coolant is essential for lubricating the water pump, guarding against corrosion and buildup, providing anti-freeze during the winter, and, in some models, assisting in cooling for engine and gearbox oil coolers. Not just any antifreeze will do; BMWs have special coolant needs (nitrite and phosphate free) to prevent build-up and corrosion of metal components. Along with BMW coolant, we also sell coolant additives like Red Line Water Wetter, which lower combustion chamber temperatures and elevate boiling points in order to prevent detonation and banging.
What color is the coolant in a BMW?
When I went to start my automobile this morning, I saw the notice “coolant low.”
I went to the closest gas station because I didn’t have time to travel to BMW. There was hardly any coolant inside when we opened the coolant tank. A red form of coolant was introduced by the employee who worked there. I was also informed that I could only use red or blue coolant in this automobile, not green. I want to know if it’s okay that I didn’t go to BMW and if using this kind of coolant is safe.
I would use pure water and an OAT-style coolant. By location and anticipated temps, percentage varies. Water Wetter is also a good idea.
I didn’t witness them mix the water, so is it okay that they just poured some sort of crimson coolant?
Dark blue or green is the color of the recommended BMW coolant. Recently, I filled up my expansion tank with coolant because it was running low. No, there was no light on. I did, however, want to add something. I did so with the engine cold. The fact that I had to add 1/2 liter of coolant kind of astonished me! Aside from that, the LOW COOLANT light was off.
Why is the coolant in my BMW low?
You should take your automobile to the automotive service shop as soon as possible for an inspection and maintenance if your coolant is low because it could be an indication of a larger issue. Some of the causes of a possible coolant shortage in your car include the following:
- reservoir leak or overflow tank
- a radiator leak
- radiator hose leak
- water pump leak
- cracked or compromised radiator seal
- defective head gasket
Why is blue coolant used by BMW?
To maintain your cooling system operating at its peak, use only German OEM engine antifreeze, component number 82141467704. (82 14 1 467 704). Because they don’t include nitrites, amines, phosphates, or borates, BMW exclusively suggests specific coolants. BMW cooling systems typically do not work with off-the-shelf coolant from a neighborhood parts store, and mixing various coolant formulas is not advised (in a pinch you should use distilled water).
The well-known blue coolant, which has been in use since the 1990s, is only permitted for vehicles with model years up to 2018. Internally, it is referred to as the G48 formula and is exclusive to BMW/MINI vehicles. In comparison to other forms of coolant, the blue coolant formula is a hybrid that extends coolant service life and is less harmful to the environment. On vehicles manufactured in 2018 and later, BMW replaced it with a new formulation that contains silicate and offers superior immediate corrosion protection. BMW does not advise using the older blue formula for vehicles created after January 2018.
For increased corrosion resistance, anti-freeze defense, and water pump lubrication in street cars, we advise combining distilled water in a 1:1 ratio with the mixture. Reduce the amount of antifreeze in your coolant mixture if you want more cooling properties, but only in warmer climates where freezing is impossible (see chart below). We advise monitoring the freezing point of the coolant mixture if you want to use antifreeze and water ratios other than 1:1.
Red Line Water Wetter can also be added if high temperatures could lead to engine banging or pre-ignition.
- BMW # 82141467704, genuine German OEM antifreeze
- optimum cooling, freeze prevention, lubrication of the water pump, and corrosion resistance
I have a BMW, can I use any blue coolant?
Now they can all work together. Ethylene Glycol serves as the “Active Ingredient” in “BMW” Coolant in addition to distilled water. Also concur with the distilled water
Can BMW use Prestone coolant?
The best formula for every BMW (r), every Mini (r), every Volvo (r), every Mercedes (r) older than 2014, every Volkswagen (r), every Audi (r), every Jaguar (r), and every Porsche (r) older than 1996. This technology controls the temperature of your engine, prevents it from freezing, and shields it from corrosion.
What is the lifespan of BMW coolant?
How frequently should a BMW have its coolant changed? Typically, every 30,000 miles or every two years, you should have a BMW coolant cleanse conducted. Your car may be able to go longer between flushes in specific circumstances.
What is the price of a fill-up of BMW coolant?
A BMW 328i coolant change typically costs between $276 and $315. While materials are priced at $124, labor costs are projected to range from $151 to $191.
Is Prestone coolant authorized by BMW?
OAT coolant, which Prestone all manufactures and is compatible with BMW coolant, will not alter the color of your coolant. It complies with all BMW ASTM standards.
BMW coolant is either blue or green.
To maintain your cooling system operating at its peak, we advise using only German OEM BMW engine antifreeze, part number 83192468442. (83 19 2 468 442). Because they don’t include nitrites, amines, phosphates, or borates, BMW exclusively suggests specific coolants. It is not permitted to use store-bought coolant from a nearby parts retailer.
2018 saw the introduction of this new green coolant, which has replaced the previous blue coolant. Green can be used on automobiles before 2018 and is backwards compatible with blue. BMW advises against using the older blue formula on vehicles created after January 2018.
The silicates in the green coolant provide further protection for the cooling system’s internals, although the coolant needs to be changed every two years.
Original BMW HT12 antifreeze from Germany, part number 83192468442
Can I use water in my BMW instead of coolant?
Your radiator system becomes more contaminated when you use water. Although using water instead of low coolant is significantly better for the engine, you should switch the water out as soon as you can for the proper coolant for your car.
Any remaining coolant in the radiator is diluted when water is added to it. Preventing corrosion, raising the boiling point of water, and reducing the freezing point of water are just a few of the crucial jobs that coolant does. While using water in place of the coolant will allow you to drive the automobile for a brief period of time, your engine won’t be adequately protected.
This means that the radiator needs to be filled with a 50/50 mixture of coolant and water as soon as the issue that led to a low coolant level is resolved.
Do I need to combine water and BMW coolant?
To make the best coolant, they must be mixed. You can purchase antifreeze that is full strength and needs to be diluted with distilled water before being applied to the engine system, or you can purchase ready-made combinations of coolant that already have water added.
Can I use blue and green coolant in my BMW?
It appears that they can coexist, with green being able to mix with blue-filled cars but not the other way around. from getbmwparts copied: G48 coolant (blue) should not be used in vehicles that were first filled with HT-12, although BMW HT-12 can be used in any vehicle that now uses G48.
What occurs if the incorrect antifreeze is used in a BMW?
The performance of the car can be hampered if the wrong coolant is used or if several types are mixed together. Additionally, the radiator’s corrosion may worsen. It’s crucial to remember that color alone cannot accurately identify the type of coolant you should use. The radiator, water pump, radiator hoses, cylinder gasket, and other components can suffer corrosion and other issues as a result of using the incorrect coolant. Having a qualified auto mechanic handle your vehicle’s maintenance is the greatest method to guarantee that you obtain the right coolant.