Acura, BMW, Buick, Cadillac, Chevrolet, GMC, Honda, Land Rover, Lexus, Pontiac, Tesla, and Volkswagon are examples of common automobiles with a 5×120 bolt pattern.
- Honda MDX
- Honda TL
- Honda NSX
- 1 Series BMW
- 2 Series BMW
- 3 Series BMW
- 4 Series BMW
- 5 Series BMW
- (1976–1990) BMW 6 Series
- 7 Series BMW
- 8 Series BMW
- BMW M1 (1978-1981)
- BMW M2 (2015-2021)
- BMW M3 (1986-2018)
- BMW M4 (2014-2020)
- BMW M5 (1985-1995) (1998-2017)
- BMW M6 (2005-2010) (2012-2018)
- Acura Allure
- Cadillac Lacrosse
- Bugatti Regal
- Chevrolet CT5
- CT6 Cadillac
- CTS Cadillac
- Corvette Camaro
- Corvette by Chevrolet
- Cadillac Equinox
- CORVETTE MALIBU
- Terrain GM
- Civic Type R Honda
- Honda Accord
- Discovery 2 Land Rover
- Discovery 3 Land Rover
- Range Rover by Land Rover
- Toyota LS
- G8 Pontiac
- S-model Tesla
- Ford Model X
- Renault Touareg
In This Article...
which aftermarket wheels will fit your
automobiles with those bolt patterns. Find your automobile and quickly see if other vehicles have wheels or rims that
When exchanging, bring the same bolt pattern as you do. Most websites arrange results by MAKE, so it’s simple to discover your
It also makes it quite challenging to find replacement rims for your car. Things are organized on this website.
Please pay attention to the following cautions:
- Some vehicles may appear more than once (particularly if they had two different bolt patterns, such as five and six),
- I could have typed anything incorrectly or picked up inaccurate information, therefore information is NOT GUARANTEED to be correct.
- It’s a terrific initial step, but there’s frequently more to “will it fit my car” than just a matching bolt pattern.
step, but utilizing wheels not intended for your car may present safety risks. Make some inquiries.
When possible, attempt to match the offset, center-bore, and lug nut diameters.
Disclaimer: Nothing on this website should be treated as fact; it all represents the author’s opinion. I declare
all responsibility for anything that occurs to anyone as a result of this page’s existence or any other pages on this
site, or any other businesses, individuals, locations, or webpages discussed, referred to, or connected to. Use
What automobiles have Mercedes’ bolt pattern?
What Vehicles Share Mercedes’ Bolt Pattern? The standard bolt pattern for Mercedes vehicles is 5 x 112. For luxury car brands like Audi, Volkswagen, Maybach, and Chrysler, this is a typical bolt pattern.
What automobiles include a 5×114-3 bolt pattern?
Honda Civic or Mazda Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3 are the most popular vehicles with PCD 5×114,3.
Do BMW and Mercedes use the same lug pattern?
A 5×112 lug pattern is also used by automotive brands including Audi, Volkswagen, and BMW in addition to Mercedes Benz.
Despite having the same lug pattern, Mercedes and Audi wheels typically have different center bores, offsets, and stud sizes. Before attempting to swap out wheels between makes, you should all double-check the precise measurements of each.
Are the five bolt patterns identical?
When it comes to the world of collector vehicles, Coker Tire offers a lot of wheels. If you want to buy new wheels, it’s crucial to know your wheel bolt pattern. If you’re looking for new wheels but are unclear of your bolt pattern, measure it with a tape measure. Learn more by continuing to read.
Starting in the late 1920s, American automakers tended to adopt a five lug bolt design. Even in contemporary automobile production, the five lug layout is still a typical feature for cars and light trucks, albeit each manufacturer takes a different approach. For instance, the 5×4-3/4-inch and 5×5-inch bolt patterns on General Motors wheels were both prevalent. The 5×4-3/4-inch design was used on many GM makes and models, including Camaro, Corvette, Chevelle, and many others. The larger design was used on several full-size cars in the Buick, Oldsmobile, and Pontiac lines as well as light trucks.
There are only two typical five lug bolt types for Ford wheels (including Mercury and Lincoln), 5×4-1/2 and 5×5-1/2, even though Ford did make a small number of passenger cars with the 5×5-inch bolt pattern. Starting in 1949, mid-size and full-size passenger automobiles like the Fairlane, Galaxie, Torino, and others primarily used the small pattern, although light trucks primarily used the bigger 5×5-1/2-inch pattern. Keep in mind that early Fords typically used the 5×5-1/2-inch type from 1928 to 1948, with the exception of “wide 5” hubs, which were only offered from 1936 to 1939. The extraordinarily big five lug bolt pattern—10-1/4 inches to be exact—makes wide 5 wheels very simple to spot. Wide 5 wheels are quite uncommon, and there aren’t any replicas of these wheels available right now.
Mopar, which employed 5×4-1/2-inch bolt patterns for many of its vehicles for a long time, is where this lecture on bolt patterns comes to an end. Only the smaller 5×4-inch bolt pattern—used on smaller cars like the Plymouth Valiant and Dodge Dart—is an exception. Even though the bolt pattern is the same, a typical Mopar wheel’s center hole is often smaller than that of a Ford wheel. It’s also crucial to remember that many Mopar applications from the 1960s and 1970s had lug nuts on both the left and right sides of the vehicle.
Consequently, how can you measure bolt pattern? As a measurement tool, you can use a ruler, yardstick, or measuring tape. Simply take a measurement from the center of one stud to the center of the stud across from it for any even number lug bolt pattern (4, 6, 8, etc.). In the case of five lug patterns, you must measure from the first stud’s center to the one closest to it on the outside edge. For a simpler explanation of this procedure, see our illustration.
All four of the common five-lug bolt types, as well as some six-lug and eight-lug applications, are supported by wheels from Coker Tire. You’ll be happy you did if you go through our entire range of wheels and do your research before placing an order.
Will Mercedes wheels fit BMW’s?
I have a set of 20″ alloy wheels that I have on my M3, and while I plan to sell the car soon, I’d like to keep the wheels so that I can use them on the new car I plan to purchase. I know that there are bolts available that will change the bolt pattern from one manufacturer to another; do you know of any that would change a BMW wheel (HRE P40 20″) to a Mercedes C-class? (C63)
This is not accomplished by the bolt. Because it is a thick spacer, it may simultaneously have the BMW and Mercedes bolt pattern drilled into it.
Thus, after installing the spacer on the vehicle, the wheel is then bolted straight into the spacer using 10 lugs or bolts altogether. I’m not sure if they have BMW to Mercedes adapters, but they would be useless given that they are typically 20 to 25 mm thick. The difference in offsets between your Mercedes and the extra spacer thickness will prevent the wheels from fitting.
With the use of an adaptor, 5-120 bolt pattern wheels can be mounted on 5-112 bolt pattern wheels.
These adapters are 20mm thick, though. The M3 typically has roughly 20+ offset, while the C63 typically has 40+ offset. Therefore, even if the bolt pattern issue was resolved, it would still be extremely difficult to mount the M3 wheels on the C63.
Fits a BMW with 5×112?
As many of you are aware, BMW changed their bolt pattern (PCD) to 5×112 from 5×120, after about 40 years, with the newest cars they’ve launched, including the G01 X3, G30/31 5 series, G32 6 GT, and G11/12 7 series. 5×112 wheel weights, sizes from other models, and tyre options are listed on the BMW 5-Series Forum (G30).
Can a BMW be fitted with aftermarket wheels?
Wheels made by Beyern are specifically made to fit BMW automobiles. Original equipment BMW wheels or knockoffs of OE BMW wheels are not produced by Beyern. We produce the aftermarket BMW wheels that will tempt you to remove your stock BMW wheels.
We are able to produce without cutting corners because we only create wheels for BMW automobiles. All of our wheels fit your individual BMW in all the important aspects and are hub-centric. It’s difficult to produce aftermarket wheels for BMW automobiles. Your BMW vehicle must be compatible with the following factors: size, brake caliper clearance, load rating, offset, center-bore, and load. For many years, Beyern has operated without compromise in this area, which distinguishes us from other manufacturers of custom wheels.
Every significant testing standard in the globe, including the German TUV standard, the Japanese JWL standard, and the American SAE standard, has been met by Beyern aftermarket BMW wheels. We only do one thing at Beyern, and we do it well. BMW vehicle custom wheels.
Can other vehicles be fitted with BMW wheels?
You could decide to upgrade the wheels on your cars at some point. However, you might not be aware of which wheels from other cars will fit your automobile.
Fortunately, any vehicle’s wheel can be used as a replacement. The original wheel should, however, have the same bolt pattern, wheel offset, and size as the replacement.
By looking at the sticker plate on your door, you may determine the appropriate size of the replacement. Measure the wheel or get guidance from an auto retailer for a suitable replacement.
By choosing the incorrect size wheel, you run the risk of harming your car’s suspension, wheels, and brakes. You could even need to stop at the petrol station more frequently for refills.
Do Audi wheels suit Mercedes vehicles?
Offset for Mercedes is 37 mm, and for Audis it’s 45 mm (I believe). E-Class is 5×112 but has a bigger center bore than us. Their rims will sort of fit ours, but ours won’t fit theirs. An E-class has smaller-diameter bolt holes.
A 5×112 bolt pattern: what is it?
The stud count (5×112) and bolt circle measurement (112), the notional circle determined by the studs’ centers, make up the 5×112 Bolt Pattern or Pitch Circle Diameter (PCD).
What kinds of car wheels are interchangeable?
Fortunately, any car has a replaceable rim available. All you need to do is make sure the new wheel’s bolt patterns, size, and offset match those on the old one.
By looking at the sticker label on the inside of the driver’s door or measuring the rim, you may determine the new wheel’s proper size. Take your car to a mechanic if you are not the do-it-yourself kind.
Are the wheels from Kia and Hyundai interchangeable?
I currently have a Hyundai Kona that I am driving on winter tires that I had previously owned on rims from a Hyundai i30/Elantra GT.
The speedometer will deviate too much if your tire diameter doesn’t stay the same.