The high-performance engines in BMW Motorrad were the focus of the development of the ADVANTEC PRO and ULTIMATE engine oils. The name ADVANTEC expresses a promise of quality to the customer and immediately embodies the themes of technology and progress: Original BMW Motorrad Engine Oils are made with special formulae that ensure long-term performance while remaining more affordable than other premium competitors.
The base oils, which make up the majority of engine oil, determine much of its quality. They make up between 75 and 90 percent of motor oil. The new, patented PurePlus Technology TM, which refines base oils from natural gas rather than crude oil, is the foundation for Original BMW Engine Oils. The end product is base oils that are incredibly transparent and almost entirely free of contaminants. A innovation in engine oil formulation, PurePlus Technology TM offers higher viscosity, lower volatility, and reduced friction.
Even under the most difficult riding conditions, BMW Motorrad Advantec Ultimate Best quality completely synthetic four-stroke motorcycle oil is designed to provide the utmost power, performance, and longevity. Advantec Ultimate SAE 5W40 by BMW Motorrad satisfies both BMW’s exacting engine performance testing and the highest levels of industry certification (API SN, JASO MA-2). This premium oil, which is made from Shell PurePlus base oils with Active Cleaning Technology, will keep your engine as clean as new, increase fuel efficiency, and prolong engine life.
In This Article...
RentedMuleGS
Follow the oil weight recommendations provided by the manufacturer. There is a reason why the engineers chose those weights.
Regarding the discrepancy, the first number pertains to the oil’s viscosity while it is cold. As a result, a 0W oil will be thinner than a 10W oil when first opened. The second figure represents the oil’s viscosity at working temperatures, which are normally between 180 and 200F. This shows that the oil would not be any thinner than the oil’s indicated weight at operational temperatures.
For instance, a 10W-40 oil suggests that the oil would not be thinner than a 40 weight oil when used at operating temperatures.
While a lighter (and thinner) oil improves mileage and, in theory, makes the engine rev easier, if the engine is built to run on heavier oil, it may not provide the essential viscosity to preserve engine parts.
Last but not least, Shell uses PurePlus technology to produce BMW Advantec Pro oil. It is an artificial oil.
BMW Advantec Ultimate Oil is produced by whom?
The two new engine oils for BMW Motorrad, ADVANTEC ULTIMATE (this product) and ADVANTEC PRO, were collaboratively developed and exclusively prepared to meet the strict and exact requirements for top performance and long service life for BMW Motorrad high-performance engines by Shell lubricants and BMW.
Needs synthetic oil for BMW?
Natural oils can be used in many car brands, however BMWs need synthetic engine oils, with some models having differing requirements than others. Chemical compounds are used to create synthetic oils in a regulated manner, removing impurities. Natural oils can contain pollutants that survived the refining process as they are processed from crude oils.
Even though they are more expensive than natural alternatives, synthetic oils are made to assist clean your engine and prevent buildup, so you can go longer between oil changes. They also function better at both low and high temperatures.
Who produces the oil for BMW motorcycles?
BMW Group Engine Oil is produced by whom? Recently, the US, Canada, and Mexico selected bp (the maker of the Castrol brand) to resume supply of BMW Group Engine Oil. Since February 2021, Castrol, who served as the supplier for a total of 14 years, has started up again.
Does BMW need particular oil?
Because of this, BMW advises using only synthetic motor oils in all BMW engines. As a result of the advancement in technology, stronger, more durable fluids and lubricants are now required than ever before.
What kind of oil is required for a BMW motorcycle?
Both the 4T Racing 5W-40 and BMW Motorrad High Performance 15W-50 motorcycle engine oils have many advantages for BMW riders. It comes in two sizes: 7 ounces (200 milliliters) for single-fill final drives and 1 quart.
Shell oil: Is it safe for BMW?
For a further three years, to the end of 2022, Shell has been officially reaffirmed as BMW AG’s exclusive preferred supplier of aftermarket engine oils in EMEA for all BMW Group brands, including BMW, BMW I BMW M, MINI, BMW Motorrad, and Rolls-Royce Motor Cars.
The three-year agreement will ensure that consumers can continue to purchase premium BMW engine oils from Shell at BMW’s network of dealers in Europe, the Middle East, and Africa.
Through this partnership, Shell will continue to produce and deliver engine oils under the BMW brand that adhere to the most recent BMW engine requirements. These oils will use Shell’s revolutionary PurePlus Technology, commonly known as gas-to-liquid (GTL) technology, which produces base oil using a patented method that converts natural gas into base oil.
“We consider it a great honor to collaborate with BMW and offer them premium engine oils made with our cutting-edge technology. As we continue to develop our commercial and technical connections, we look forward to further strengthening the collaboration “Patrick Carre, vice president of Shell Global Commercial’s Global Key Accounts, stated.
What kind of oil is ideal for a BMW R1200GS?
All the components required to execute an oil change on your water-cooled R1200 and R1250 are included in this kit. Kit contains:
- Genuine BMW motor oil in 4 quarts Don’t accept inferior oil simply because “it costs less.” The exacting demands of precision BMW motorcycle engines are met by BMW special performance oils. excellent protection against wear, rust, corrosion, and oxidation; maintains grade under severe loads under all operating circumstances. The suggested oil for the new water-cooled R1200 and R1250 models is BMW’s SAE 5W40 Advantec Ultimate Full Synthetic Engine Oil.
- Oil Filter, OEM OR HIGHFLO – Aids in keeping oil clear of dirt and other potential motor-related contaminants. This filter is a genuine BMW component; it is not a knockoff.
- It is advised to replace the OEM crush washer for the oil drain plug each time you change your oil. Failure to do so could cause oil leaks or seepage around the drain plug, or in extreme situations, strip out the motor’s threads, leading to a much worse issue.
Can 5w30 and 5w40 synthetic oil be combined?
Let’s respond to the question by defining their differences now that it has been raised. First off, it’s fortunate that he discovered Castrol Edge 5w40. Because the response is typically affirmative. Several viscosity grades are compatible and mixable, particularly when oil is scarce. Your engine won’t suffer any negative effects from it.
However, use the same motor oil brand whenever possible. Additionally, combining the two will result in a new viscosity that is different from what the manufacturer intended, therefore it is better to switch to the proper viscosity as soon as possible.
How frequently is an oil change advised by BMW?
Even the owner’s manual for your BMW suggests getting your oil changed every 15,000 miles. Additionally, the instrument panel reminder lights on the majority of BMW vehicles are programmed to alert the driver to replace their oil at this time. However, changing your oil more frequently can improve engine performance and longevity.
How entirely synthetic is 5w40?
In cold weather, full synthetic 5W-40 motor oil is designed to flow like 5 Weight oil at a cold start and like 40 Weight oil once the engine reaches normal operating temperature.
A cutting-edge full synthetic 5W-40 motor oil is Castrol EDGE(r). It is our sturdiest liquid and oil, designed to handle the extreme temperatures and pressures of contemporary gas and turbo diesel engines.
In my BMW, can I use Mobil 1?
The BMW manufacturer’s warranty won’t be impacted by using the proper Mobil 1 product during routine maintenance and in accordance with your vehicle’s manual.
Which engine oil, 5w30 or 5w40, is preferable?
Although it may be utilized by various types of cars and in a variety of temperatures, 5w30 is best in colder climates. Higher mileage engines frequently use 5w40, which operates better in hot temperatures.
What distinguishes motor oils rated 5W40 and 10W40?
The fundamental distinction between the two types of oil is which is thinner. At lower temperatures, the 5W40 is thinner than the 10W40. However, when the temperature is higher, both motor oils work as intended in a comparable manner (using the same viscosity).
There is no need to use 5W40 oil if your motorcycle needs 10W40 engine oil. Your motorcycle will simply work nicely with the 10W40.
The engine components of your motorcycle will run smoothly thanks to the 5W40’s thin consistency. When the engine is started, it will also easily lubricate the moving parts.
This demonstrates how crucial it is to consider the oil’s number while selecting the proper engine oil for your motorcycle. The number “40” denotes the maximum oil thickness your engine may use to operate effectively, as was already said.
On the other hand, there are good reasons why 10W40 motor oils are heavier than 5W40 oils. When starting an engine, this sort of oil does a good job of lubricating the moving parts. The primary distinction between these two engine types, however, is that the 5W40 can perform better than the 10W40 in extremely cold climates.
The definition of 5W 40 oil
Winter is indicated by the “W,” which stands for that season. The number before the “W” denotes the oil’s viscosity (or thickness) at low temperatures, hence the “W,” and the number after it denotes viscosity at higher temperatures (150oC on average), when the engine is actually running.
In comparison to, say, 10w40, 5w40 motor oil has a winter viscosity rating of 5, making it less viscous at extremely low temperatures. It has a hot viscosity grade of 40, making it at high temperatures just as viscous as 10w40 but less viscous than oils like 15w50.
What kind of car uses 5w40?
In American diesel pickup trucks and European cars with gasoline engines, the 5W-40 viscosity is frequently advised for performance engines.
Consider Mobil SuperTM Synthetic Euro or Mobil 1TM Formula M if you drive a contemporary European vehicle. Below, compare these two oils. They can be applied to both diesel and gasoline engines.
Choose between Mobil 1TM Turbo Diesel Truck or Mobil Delvac 1TM ESP if your diesel engine needs an oil that complies with CK-4 requirements. Notably, we do not contrast motor lubricants designed for gasoline-powered vehicles with those for diesel engines.
Why are there different numbers in 5W-40? The figures represent the oil’s weight and thickness, or viscosity. When it’s cold, motor oil thickens; when it’s hot, it thins. The first value represents the oil’s viscosity when it is cold, while the second number represents the viscosity when it is operating temperature.
Choose the product that best suits your needs by comparing the many degrees of protection that each one of these offers.
What if I used 10w40 rather than 5w30?
5W-30 oil is not used in your car. According to Kia literature, 10W-40 oil viscosity is advised for your car. You can use 5W-30 oil if the outside temperature is considerably below 32 degrees when you are driving the car, but you can also use 10W-40 if the outside temperature is below freezing. Requesting an engine oil/filter change will have the answering mechanic take care of this for you if you prefer that this maintenance be done by a qualified Mechanic sent directly to your location by YourMechanic. Do not hesitate to get in touch with YourMechanic again if you have any more queries or worries.
The informative nature of the aforementioned claims warrants independent verification. kindly visit our