Your car controls how wide your trunk opens if your tailgate is automated. The trunk may not open as wide as you’d want as a result, making it difficult to load everything into your BMW. If you drive an X Series or Gran Coupe, you might even find that the tailgate opens too widely. This is especially true if your garage is low and the trunk lid might harm your car.
The Power Trunk Retrofit from BimmerTech makes it simple to customize the tailgate on your BMW. Simply physically raise the trunk to the height you choose, then press and hold the trunk release button on the key fob for five seconds. Your settings will be stored, allowing your tailgate to open to the height you requested in the future.
In This Article...
How to Open a BMW’s Trunk Without a Key
One of the most well-known luxury car manufacturers worldwide is BMW. They are renowned for their excellence, effectiveness, and elegance. What transpires, however, if you misplace your key or leave it in the trunk?
Look for the trunk release lever or button on the center dash or next to the driver’s seat to open the trunk of a BMW without a key. To fit inside the trunk, you can also lower the back seats and pull the internal release mechanism.
If the BMW is unlocked, the foot-activated sensor can also be used to open the trunk, or the physical key can be used to manually open the trunk if the fob key or battery dies.
How to Manually Open a BMW Trunk
You might need to know how to manually open the BMW trunk or back hatch for a few different reasons. Some owners might only be interested in finding out whether it’s possible without using their keyfob or interior switch. Or, even if you have the key, the trunk might not open because you have a dead battery. Below, we offer some suggestions.
On both automobiles and SUVs, the manual opening mechanism for the hatch or trunk is often found directly above the license plate if your battery is functioning properly. The switch to open the trunk is not apparent at eye level, but if you reach up into the small piece of bodywork that hangs over the back license plate, you will feel it. You’ll need to have your key on hand if the car is locked.
SARAFIL
What happens if my girlfriend arrives in the car with stuff in the trunk and wants to open it without having to turn the ignition off or get out and use the key? It seems very easy, doesn’t it?
Why all the excitement about a Bimmer when my very first car, a 1981 Datsun hatchback, even featured a trunk release? What’s up with the random distribution of who gets the trunk release button and who doesn’t?
The switch on the back trunk is the topic of discussion everywhere. On the underside of the black trim strip, directly behind the BMW roundel on the rear trunklid, is a release. Unless the trunk lid is sealed shut with the key, pressing it will cause the trunk to open.
QSilver7
The following are steps from the owner’s manual that have been frequently posted on how to unlock the car in the event of an electrical failure:
1. As has already been established, the door and trunk lock cylinders were made to be manually unlocked by inserting the key and turning it COUNTER CLOCKWISE (to the left)…PAST the position that normally electrically unlocks the door or trunk.
2. If the doors are not locked, you can open the trunk using the jump start positions under the hood.
ONLY…if the trunk lock is turned to the UNSECURE horizontal position (–)…then you are stuck because only another MASTER key will be able to unlock the trunk (that is, any of the keys you have that don’t have the GRAY head—that is, the valet/service key that doesn’t unlock the trunk or glovebox). If the trunk is locked, neither the trunk release button nor the central lock/unlock button will release it.
Steps for opening the trunk
Naturally, pressing the trunk release button under the dash is the first step in opening the trunk. then the key in the keyhole of the trunk. Last but not least, the back seats may only be climbed through if they have already been removed from the trunk (a catch 22). A locksmith is the last option (or having BMW or another certified BMW mechanic check it out). I’ve had similar experiences when the key wouldn’t turn because it was too cold. Fortunately, one of the back seats was unlocked, allowing me to take it down and access the trunk to use a screwdriver to manually unlock the mechanism. Then, it started to work. It must have become stuck. Hope this was useful.
If your key won’t open the trunk, you might need to remove the back seats in order to reach the lock mechanism or linkages from within the car and open the trunk.
How do you manually open the trunk of a BMW?
You might want to check out this way to unlock a locked trunk manually from inside if your BMW doesn’t have a key slot: To access the trunk, you simply need to move to the backseats of your car, release and pull down the center piece of your seats. Once there, all you need to do is pull the emergency release handle to start moving. Naturally, your BMW must come equipped with an emergency release handle.
Without power, how do you open the trunk of a BMW?
You must perform the following in order to enter your BMW’s trunk while the battery is dead:
- By depressing the release button on the rear of the fob, you can remove the secret key from your key fob.
- Find the slot where your manual key goes. On select BMW models, the trunk or the lid may have a manual key slot. In that case, open the trunk.
- Find the door’s keyhole. Try the door if you can’t find anywhere to use a key on the trunk. Particularly the driver’s side door is likely to feature a place for a manual key. If so, open the car door.
- eject the concealed key container. If there doesn’t seem to be a key slot on your door, it might be hidden in a hidden compartment under the door handle. The key slot can be seen if you wedge the key into the opening beneath the compartment and pop it off. Lock the vehicle.
- For trunk access, fold down the back seats. Your jumper cables will be available to you at this time. But if you want to access the trunk from this position, a rectangular tab can be found inside the door of the trunk. When the tab is removed, a wire ought to follow. The trunk will open if the wire is pulled.
It could be time to call roadside assistance for assistance if, for any reason, you are unable to enter your car. Jerry should be brought if you don’t have roadside assistance.
For as little as $4.16 a month, Jerry provides roadside assistance that includes jumpstarts, lockouts, key replacement, and towing.
a
How is a BMW trunk opened?
Look over to the driver’s door when seated in the driver’s seat of your BMW. A button depicting a car with the trunk open can be found close to the storage pocket. The trunk of your car can be opened or closed by pressing this button.
When the keys are locked inside the BMW, how can you unlock it?
“Door Open: If you ever lock your keys inside your BMW, call our Response Center toll-free at 1-888-333-6118 and, after providing your name and password, we will send a signal to your driver’s door to unlock it.”
The trunk unlock button cannot be found.
To open the trunk, raise the lever next to the driver’s seat. Using your master key to lock the trunk release lever will keep people from opening the trunk. Give them your valet key if they need to drive your car or lock/unlock the doors.
How is a car trunk lock picked?
Step 1: Enter your vehicle
Get inside your automobile first as it’s unlocked. The flathead screwdriver can be inserted between the car door and car frame if it is locked and you don’t have a key and the vehicle is locked. Push the car door open, then reach inside with a coat hanger for the key to unlock it. Get inside the vehicle when you’ve successfully unlocked it to move on to the next phase.
Step 2: Pull out the backseat after pushing the front seat of the vehicle.
The front seat should be moved forward because you will need room inside the vehicle to move about. The bolt holding the bottom and back of the seat together must then be removed in order to remove the backseat. For this stage, a wrench is needed. You can now remove the backseat after removing the bolt.
Step 3: Enter the trunk and search for the metal bar there.
You must crawl inside the trunk in order to open it from the inside. You might take a different approach or have someone else complete this stage if you are uncomfortable in small surroundings. Since you need to search for the horizontal metal bar, don’t forget to carry a flashlight. Look for the box next to the metal bar once you’ve found it.
Step 4: Use the screwdriver to open the box.
Once you’ve located the box, use the screwdriver to open it clockwise. The trunk will open on its own. Don’t forget to put everything back where it belongs after you exit the vehicle.
If you want to use a screwdriver to open a trunk from the outside, all you have to do is use a flathead screwdriver to pry open the latch. As soon as the screwdriver is in position, move it to the left and the right until the lock is unlocked. Your car’s trunk lock could be damaged by this procedure, though.
Can you use a screwdriver to open a trunk?
How is a car trunk opened from the outside? I accidentally left my car’s keys in the trunk. I’ve heard that a screwdriver can be used to open a car trunk. Is this a fact? What should I do?
In less than two minutes, find out if your auto insurance is being overcharged.
With a screwdriver, pry open the latch and turn it left and right until the trunk is unlocked. This is not advised, though.
If you use a screwdriver to open the trunk of your car, you risk damaging the paint, and replacing paint can cost hundreds of dollars. You also run the chance of damaging the lock. To solve the problem, you might want to contact a locksmith.
With a roadside assistance membership, you can avoid the inconvenience of lockouts and breakdowns. Try Jerry if you want roadside assistance at a great price. For just $6.99 a month, Jerry delivers the best roadside help in the business, including features like towing, lockout service, and a repair hotline. a
When your trunk won’t open, how do you do it?
Try these techniques if your trunk won’t open to see if you can get it to do it on its own and avoid calling a locksmith. Be careful not to damage the locking mechanism while testing things out as this could require expensive repairs.
If your trunk won’t open, one of the first things you can do is give it another go. In this case, the trunk latch may have become caught as a result of dirt and debris getting lodged on it or as a result of the rubber from the trunk adhering to the lid itself. It will take extra force to open this, giving the impression that the lid is stuck. You can attempt to access your trunk from inside your car if opening it with a bit more power the second time doesn’t work.
Try opening the trunk from the inside of the car if you are unable to do so using the external lock. Use the manual release lever, which is often found on the car’s driver side. If it doesn’t work, see if you can remove or fold down the back seats to gain access to the trunk. If this is successful, you will have to squeeze yourself inside the trunk and pull the release lever to open it. It is vital to note that this procedure might not work if the trunk’s lock is damaged, in which case a trip to a service center or locksmith is necessary.
Even though you can try various do-it-yourself tricks to try and open your trunk, it’s vital to remember that some of these may wind up doing more harm to your car. In light of this, you ought to refrain from attempting to open your trunk unless you have easy access to your car. If you don’t and your keys are in the car, we strongly advise getting in touch with your auto insurance company or your automobile’s preferred servicing facility for assistance. If there is a locksmith within driving distance, you can also go to them and ask them to assist you in unlocking your car or trunk. In either case, hiring experts is still your best course of action even though their services can be pricey.