2. To make the service indicator light appear, press and hold the Set/Reset button for 10 seconds. Scroll the service menu by repeatedly pressing the Set/Reset button.
3. If the service item is past due, the message “Reset executable” will appear. By holding down the Set/Reset button for 3 seconds, the reset will begin.
4. You’ll see the message “Execute reset?” Press the Set/Reset button one more for three seconds to confirm the reset. ‘Reset running’ will be indicated on a progress bar.
5. The message “Reset successful” is displayed to validate the reset.
6. Switch off the ignition. To make sure the indicator has been reset, start the engine.
In This Article...
The oil reset maintenance light system for BMW 3 Series 2013, 2014, and 2015 models can also be reset as follows:
- One time press the start/stop button (do not start the engine)
- Hold down the Set/Reset button down until the service indication light turns on. Scroll the service menu by repeatedly pressing the Set/Reset button.
- Hold down the Set/Reset button while holding the highlighted Oil Change Interval button down. Release the Set/Reset button when Reset appears, then press and hold it once more.
- When everything is OK and the new distance displays, the reset is finished.
- Switch off the ignition. To make sure the indicator has been reset, start the engine.
What do the service lights on my BMW mean?
The intensity of the problem will typically be indicated by the color of the illuminated sign. Red denotes a problem that needs to be fixed right now. Orange denotes a less urgent problem, such as a need for car maintenance. You can learn about lights and indications from the colors blue and green.
How can I remove a BMW service alert?
- Start the electrical systems of the car, but do not start the engine.
- Till the service notice shows, press and hold the tiny odometer button in the instrument panel’s lower left corner.
- When the message says “Reset,” let go of the button and press and hold it once more.
How can my BMW 3 Series be reset?
The mechanic will reset the computer in your BMW after the service is complete so it can record your mileage and let you know when the car will need maintenance again in the future. However, the techniques listed below can help you if you maintain your own car but are unclear of how to reset the computer system.
- With the engine off, turn the key to the ON position.
- For TEN seconds, press and HOLD the ODOMETER button. It can be found at the Instrument Cluster’s extreme bottom LEFT corner.
- The dash screen will display FGSTNR along with a number. Your chassis number is this (See image example).
- The LAST FOUR numerals are added. Ex: 3+4+5+6= 18 (taken from the image above). Your UNLOCK CODE is going to be 18.
- Press and hold the ODOMETER button one more until the FGSTNR clearing area appears (you will still see numbers in the top section).
- Press the odometer button until the upper Menu area (entering code menu) reaches 19 after the bottom area has cleared; When you do, the text will appear at the bottom: Press the odometer button to enter your unlock code after turning the lock on (from the example above) This is seen in the bottom portion.
- The screen will appear as in the image above after a little period, at which point the menu will once again appear at the top. To access the number 21 menu, press the odometer button (also theentering code menu).
- On the screen’s bottom, it will say: RESET? To complete the reset, press the odometer button.
Your BMW’s computer has been restarted! The existing settings must now be added again, or new ones must be added.
**NOTE: Slowly repeat the procedures if you are unable to reset the BMW computer on your first attempt. If you’re still having trouble, ask the dealership for help or refer to your car’s owner’s manual.
How can I view the service record for a BMW 3 Series?
If your car has iDrive, you may retrieve the service history by going to Vehicle Information -> Vehicle Status -> Service Requirements -> Service History. You may see illustrations that outline each step on the left side of the page. You will also be able to see the dates of the most recent maintenance and the work that was done if your automobile was built after March 2009.
Additional methods for gaining access to your car’s history are as follows:
- You should check the warranty details, as a good reminder. This will inform you of any remaining coverage or associated benefits. as well as looking over the vehicle health report. This will give you a general idea of the situation and any problems that can arise.
Can I operate a BMW with the check engine light on?
A constant glow normally denotes something less serious, but a check engine light that flashes suggests your car’s engine is seriously damaged and needs quick repair. We strongly advise not operating your BMW while the check engine light is flashing and setting up BMW servicing right away.
A service light’s meaning:
Many people still don’t get the ten-year-old question of “what does it signify when the service light comes on.” It’s crucial to first address the frequently asked question, “Is service engine soon the same as check engine,” before delving further into the service vehicle soon indicator.
An alert that specifically says there is a problem or malfunction with the vehicle’s engine is called “service engine soon.” In order to prevent operating the damaged engine and further harming it, it is crucial to have it assessed by a qualified mechanic as soon as this sign illuminates.
normally indicates the failure with an indicator light. It also suggests that your vehicle might be past due
What does “service due” mean on my BMW?
Service Vehicle: Your BMW needs service if this light is red. When it’s yellow, your BMW needs maintenance soon. It’s best to book a servicing appointment as soon as you can in either situation.
How can my BMW be factory reset?
Select “CAR menu” > Settings > General settings > “Reset vehicle data” on your BMW with Operating System 7 to reset your personal data and settings. Select “Menu” > “System settings” > “System settings” in your BMW with Operating System 8. Reset the car’s data
After an oil change, how do I reset the BMW computer?
My uncle, a retired technician, recently changed the oil in my BMW. The maintenance light is still on, so I suppose he forgot to turn it off. How can I turn off the BMW’s oil-change light?
In less than two minutes, find out if your auto insurance is being overcharged.
- Don’t start the engine after turning the ignition on. You should hit the start button instead of depressing the brake pedal if your car has a push-to-start system.
- The service menu will show if you continue to depress the trip reset or odometer button on the instrument cluster. The reset button is normally located to the left of the speedometer, and pressing it for around 10 seconds should bring up the service menu.
- To discover the oil change notice, use the reset button to scroll through the settings. Press the reset button after that.
- Depending on the model, you might have to scroll through the options using the controls on the turn signal lever until you come across a prompt asking you if you’d like to reset the warning. Then, to reset the turn signal, press the BC button at the lever’s end.
- When prompted, press and hold the reset or BC button until the display indicates that the device is resetting.
You can save money on automobile expenses by having friends or relatives work on your vehicle, but employing Jerry can help you save money on extra expenses like auto insurance. The typical user of Jerry saves $887 annually on auto insurance.
Don’t be afraid to alter insurance or payment plans because you’re concerned about the extra labor. Jerry takes care of all the paperwork and even assists with canceling your previous insurance! Additionally, you can text one of our agents using the app if you have any questions along the route. They’ll be there for you whenever you need them.
Why does my car seem to need maintenance?
Automakers put a service required light on the dashboard of cars as a safety measure for drivers. The computer keeps track of how many miles you travel and will remind you to maintain the engine at predetermined times. Your car’s engine will remain healthy and functional for a very long time if you carefully maintain it.
Although it might be used for other fluids or parts, the service required light is primarily used to alert drivers when it’s time to change the oil and filter. In the past, this light was comparable to the check engine light and might indicate that the system has discovered a defect. Now, the check engine light will indicate if a malfunction has been found, while this light is mostly meant to encourage the driver to change their fluids.