Could you please explain how to turn off the airbag light on my BMW X5? Every time I turn on my car, it has been coming on, and I have no idea how to turn it off. I’m hopeful that resetting the light will solve the problem.
In less than two minutes, find out if your auto insurance is being overcharged.
Unquestionably, resetting your airbag light is a solid first move. Observe these steps to reset the airbag light on your BMW X5:
- Upon starting your automobile, check to see if the airbag light is on.
- Then, after seven seconds, restart your vehicle.
- Two more times, repeat this procedure. Your airbag light ought to disappear.
It is advisable to have someone check over your car for you if the airbag light starts to illuminate once more. Given that sensors are frequently the subject of auto recalls, there may be an issue with the sensor or the airbag itself. The airbag will protect you and any passengers in the event of an accident.
The Jerry app makes sure you are prepared for the aftermath while airbag maintenance makes sure you are prepared for an accident.
The Jerry app, a registered broker that provides end-to-end support, compiles reasonable rates, assists you in switching plans, and even assists you in terminating your old policy.
In This Article...
Procedure
- Under the dash, you may find the OBD-2 port. Scanners can be connected to OBD2 ports. A 20 pin OBD2 adaptor is required if your BMW was manufactured in 2001 or earlier.
- Start the engine. Avoid starting the car.
- Scanner will start up. On the scanner, choose your BMW chassis/model. We are using a Foxwell NT510 from the BMW scanner in this instance.
- Choose BMW – Body – Safety System control units. You may read Airbag Fault Codes by navigating to the Safety System/SRS control unit.
- Clear the airbag control unit’s codes. revisit the first menu. To access Clear Fault Codes, scroll below. On the following screen, click YES.
How Can the Airbag Light Be Reset? (5 Steps) Whether Scanner Is Used
Your life may one day be saved by an airbag if an accident occurs. It’s time to turn the airbag light back on if you repaired the airbag system. Here’s how to go about it.
Do you want to know how to reset your airbag light after it appeared on your dashboard?
When certain dashboard lights come on, like the engine or airbag lights, you should pay close attention—the airbag light in particular is crucial for your safety.
When the light is on, the airbag will not deploy as it is intended to do whenever there is a collision.
Turn on and off your ignition.
When you experience the same problem, you should start by following this technique, which is identical to resetting the airbag light on a Toyota Camry. It needs timing the airbag light and has four straightforward stages that are simple to complete.
First, activate the ignition. Wait for the airbag light to turn on next; it typically illuminates for seven seconds before automatically turning off. After waiting three seconds, immediately flip the ignition switch off. Before starting the engine, go through the basic procedures a couple of times. Your car’s airbag light should illuminate for seven seconds before turning off permanently if everything is done correctly.
Two Causes of the Airbag Light Remaining On in Your BMW
Nothing is more aggravating than a dashboard warning light that remains on inexplicably. It could be tempting to disregard your airbag warning light if it suddenly started flashing one day and won’t go away. However, it’s crucial to look into and fix the issue since if you get into an accident, your airbags might not deploy. Here are two potential causes of this issue, along with solutions.
It’s possible that something interfering with the seatbelt/person sensor is the most frequent cause of the airbag light remaining on. You are informed that the SRS (supplemental restraint system) is off by the airbag light. The car detects a person sitting in the seat and/or fastening their seatbelt, and when it activates the SRS to protect the occupant, it turns off the airbag light.
Even though there is plainly someone seated in the seat, if the airbag light continues to illuminate, there may be an issue with the seatbelt or seat sensor. Simple obstructions like a penny or other small object getting stuck in the seatbelt buckle and interfering with the sensor could be the cause of this. So, the first thing you need do is make sure the buckles are clear of any foreign objects.
However, faulty seat wiring that cannot transmit data to the vehicle’s monitoring system may potentially be the root of the problem. While you can use a flashlight to visually inspect the area behind the seats to see if there is a problem, you’ll probably need to take the car to the mechanic to have this specific issue identified.
The possibility that the BST sensor may have been activated is another issue specific to BMWs. If you ever experience an accident, the Battery Safety Terminal is a safety device created to cut off the positive cable to the battery. Although this can prevent an explosion or other battery-related risk from making a bad situation worse, the BST has a horrible habit of getting activated by little impacts, such as running over a really awful pothole.
The BST can stop the car from starting when it is activated. It may also result in the airbag light turning on and staying on, which would prevent the airbag from deploying in the event of an actual collision.
To address this specific issue, you’ll need to take your car to the mechanic. However, as it can be seen as a maker’s defect, the repair might be covered by warranty. For details, it’s best to get in touch with the business.
Contact a BMW service center for help with repairing any additional problems that might be interfering with your airbag sensor.
Why does my BMW have an airbag light?
What it appears to be: A passenger seated in a chair with a seatbelt fastened holding a circle in their lap. The “SRS” symbol is illuminated in the dash of some cars.
What it means is When a problem is identified by your BMW’s computers within the airbag control unit, the airbag system, or supplemental restraint system (SRS) light will illuminate. If the SRS warning light is on, the system has been turned off, and the airbags won’t inflate in the case of a collision.
What to do if it comes on: When a car starts up, this light will briefly illuminate in the dash before going off, signaling that everything is working as it should and making it safe to drive.
Check to see if anything is obstructing the seatbelt click switch or if anything is piled up behind the seat, which could harm the wires, if the SRS light remains illuminated after starting the car or while it is in motion. If nothing is discovered, visit a local independent BMW repair facility as soon as possible to have a professional inspect and identify the issue. This is not something to be taken lightly, and it is safer to get this issue looked at by a certified BMW mechanic than to jeopardize your safety and the safety of your passengers by driving while it is still active.
How to turn the light off: After you bring your BMW to your neighborhood BMW shop, your mechanic will examine the component and the wiring, run code checks, and perform any necessary repairs.
An illuminated SRS light may indicate a sensor issue, the need to reset your airbags (for instance, if you were recently in a collision and the sensors were activated but the airbags did not deploy), or an issue with the seatbelts. Checking car bulletins is a good idea because there may be other instances when your airbags need to be recalled.
My airbag light won’t go off; why?
A problem with the seatbelts or airbags is indicated by the airbag light. Therefore, it’s usually not a good idea to drive when the airbag light is on. We advise having it towed to the dealership rather than driving it yourself if it remains illuminated in your car.
What is the cost of turning off the airbag light?
Depending on what is generating the airbag light, resetting it might cost anywhere from $0 to $1000. Resetting the codes, which is possible for free, might be sufficient if the issue was only momentary. It can also be brought on by a costly component that is malfunctioning and costing you over $1000, such as the steering angle sensor.
Why does the airbag light turn on?
The airbag light will be on if your airbag has been deployed and has not been correctly reset. The light will turn on if the airbag hasn’t been deployed when the system detects that it can’t activate the airbag; this indicates that your car’s airbag system is having some sort of issue.
Do I need to deactivate my passenger airbag?
Only the following situations are advised by the NHTSA for disabling airbags: If it is determined that an adult passenger would be safer with the airbag turned off because of a medical condition
When the airbag light is on, can I drive?
No, driving while the airbag light is on is not safe. When the airbag light comes on, the vehicle’s airbag system is malfunctioning. Due to this flaw, the airbag is unlikely to deploy after an accident. Therefore, it is not advised that you use the vehicle until the system has been fixed.
Never disregard the important caution. There’s no need to gamble with the car, even though it doesn’t make it unsafe to drive.
The light does, however, show that the SRS parts are not functioning properly. This may potentially indicate that the airbags won’t activate in the event of a collision. You shouldn’t wait until you are involved in an accident to determine whether the airbags will keep you safe.
Why does a passenger airbag deactivate?
The mechanism may automatically switch off if the bag is heavy enough to activate it but not safe enough for the airbag to deploy. Potential issues There may be a problem with the system if an adult is seated in the front seat with the passenger airbag light remaining lit up “OFF.”
Can you reset an airbag warning light?
You can reset your airbag light in your garage at home. In the event that everything else fails, take your car to a mechanic or dealership to have the light reset and to have any issues looked at. Initially, try this: Put your key in the ignition and turn it to the “on” position.
Where is the switch for the passenger airbag?
If the vehicle has a switch called the Passenger Airbag Cut Off Switch, it can be used to deactivate the passenger airbag (PACOS).
When the passenger door is open, you may access the switch for the passenger airbag on the passenger side of the instrument panel.
ALL FRONT-FACING PASSENGERS (CHILDREN AND ADULTS) CAN SIT SAFELY ON THE PASSENGER SEAT WHEN THE AIRBAG IS ACTIVATED.
Rear-facing child seats are safe for use on the passenger seat when the airbag is switched to OFF.
Is the airbag fuse removable?
The airbag cannot be turned off by removing a fuse; even if it had one, which it does not, doing so would not turn it off. Cutting or twisting the wires or changing the impedence won’t make it work either; after all, the equipment is fail-safe.
Can an airbag light be caused by a low battery?
The backup battery is dead. It is the most frequent cause of an airbag light that won’t go off. It might take place if your car’s battery is running low or has been depleted for any other cause. When the battery is fully recharged, the issue will be resolved.