You can learn how to set up your BMW’s garage door opener by reading this comprehensive tutorial. The HomeLink system in your new BMW is incredibly easy to set up and use. No more than a few minutes should pass. The most recent BMW models include the HomeLink platform. By using this feature, you can easily access your garage or gate without using a garage door remote.
What you’ll need:
- Obtain the remote for your garage door opener. Relocate your BMW from the garage.
- Be close to the garage or gate but out of the way when it opens or closes.
- Open the garage door opener control panel, get a ladder, and look for the LEARN button.
- Enter your BMW and turn on the accessories, but do not turn on the engine. The start/stop button should be pressed without your foot being on the brake.
- Press and hold the Homelink buttons 1 and 3 simultaneously on your rearview mirror for approximately ten seconds. The light will initially be solid yellow before rapidly flashing green takes place. – All previous code settings have been erased.
- Press button 1 until a slow yellow light appears.
- Holding your garage door opener three inches from the mirror, press the button your BMW should duplicate.
- Release your hold on your remote button and press the button to be programmed once when the tiny light on the mirror flashes green quickly.
- Now, ascend to the garage door opener’s control panel and select the LEARN button.
- Approximately 30 seconds remain for you to descend the ladder and activate Homelink button 1 on your mirror.
- Press Homelink button 2 until a slow-blinking yellow light shows if you have another door to preset. Re-do steps 7-9.
Chuck Vossler, one of our own, went on camera to demonstrate the full procedure and provide very thorough instructions. View the video below, and don’t forget to follow our YouTube channel.
In This Article...
Owners of BMW, Start Here
Trying to set up your BMW’s HomeLink? The steps you must take to quickly and easily train your HomeLink are explained in the video on the right side of the page. The most frequently required video will start playing immediately, however we have added manufacturer-specific movies below the main player for some garage door openers.
Not a fan of video? By selecting your vehicle’s model name from the list below, you may also get comprehensive instructions tailored to your particular model.
Choose your training films from the list beneath the main video if you are a BMW owner who uses a Genie, Sommer, or an older model of HomeLink (model years 2008 and prior).
How can I set up the garage door opener on my 2011 BMW?
For someone as smart as you, setting up and carrying out the programming for the BMW garage door opener using the BMW HomeLink setup is a really simple operation! It wouldn’t take more than a couple of your valuable minutes. The HomeLink user handbook has the most precise training instructions, so you might wish to read it. We have you covered if you don’t want to read the lengthy manual or can’t find it, though!
Rearview mirror for a BMW The buttons on the rearview mirror can be used to effortlessly program HomeLink. Any remote-controlled door can be set to respond to these buttons. How to configure a BMW garage door opener is as follows:
- Once inside, lock all of the doors.
- Press the HomeLink button you want to program, then let go of it.
- Wait until the orange flashing indication light appears.
- Hold up your garage or gate remote device between your BMW HomeLink system and a distance of 1-2 inches.
- Next, use your remote to push and hold the “Open” button.
- Hold the remote button down until the HomeLink indicator light on your device turns a strong, solid green.
- You should now let go of both buttons.
- To confirm, press the HomeLink button once.
You should now use the remote to program the BMW garage door opener. You must make sure that the HomeLink configuration is finished and turned on. You may now effortlessly open and close your garage door both with and without the remote by doing this. Here’s how to go about it:
- Find the location of your BMW garage door opener by going into the garage.
- Once you’ve found it, click the “Smart” or “Learn” button on the device’s back. Depending on the design, one or both may be present.
- Within 30 seconds, go back to your car and then push and hold the HomeLink button for two seconds.
- Press this button three times more.
Now that your garage door is associated, you can open and close it with either the remote control or the HomeLink system.
Tips and safety measures for programming BMW HomeLink:
- Make sure your space is clear of any big objects or people before you begin programming a BMW garage remote.
- Ensure that your vehicle is not left too far from the garage area.
- To maintain accurate programming, it’s a good idea to always get a new battery for your garage door remote.
- Keep a stepladder nearby if your garage door opener utilizes a rolling code since you might need it to access the “Smart” and “Learn” buttons during the HomeLink garage door setup.
How can I set up the garage door opener on my BMW x3 2022?
Select the HomeLink button you want to program, then press and release it. There will be an orange flash in the indicator light. Hold the open button on your garage or gate remote while bringing it within 1-2 inches of your BMW HomeLink system. Press the HomeLink button once to confirm after releasing both buttons.
Without a remote, can a BMW garage door opener be programmed?
Without a remote control, it is impossible to program a garage door opener. But the buttons on your car’s garage door opener can be reset using your remote transmitter. Alternatively, you can operate the door without a remote by using an electronic keypad.
- Press the program and arrow buttons at the same time on keypads. Before choosing your own, restore the brand’s default code.
- Press the two “end buttons” on control boxes to erase prior settings. Then sync your car’s buttons using the remote control.
How can I configure my BMW key for 2021?
While keeping the unlock button depressed, press the BMW logo three times on your BMW key fob. After pressing the BMW logo three times, release the unlock button. Once the ignition is turned on, your new key should be associated with your BMW.
Without a remote, how do I program my HomeLink garage?
In conjunction with the transmit button, press and hold the chosen HomeLink button. Hold these two buttons down simultaneously until you notice the HomeLink LED begin to flash significantly more quickly.
How can I link my iPhone to my old BMW?
On your iPhone, go to “Settings” > “General” > “Siri” and “Settings” > “WiFi” to accomplish this. You may now use Bluetooth to link your iPhone and automobile together. To do this, go to your iPhone’s settings and choose “Bluetooth.” Then select “Manage mobile devices” from the menu under “Media” on the BMW control display.
Can any garage door opener be paired?
You can program universal garage door remote controls to work with the majority of brands of contemporary garage door openers. To program the remote and make sure it works with your garage door, you still need to know the name of the manufacturer. Universal garage door openers can be set up to open one or two garage doors. A universal remote can also turn on your home’s lights or the garage light if you have a light control switch. A universal remote should work if you have a more recent garage door opener but are unclear of the precise model.
How is a BMW x3 programmed?
How to Set Up a New BMW Key Fob Press the BMW logo three times while holding down the unlock button, and then let go. Within 30 seconds after the initial key programming, repeat step three if you still have more keys you’d like to program. To finish the procedure, start the engine.
How do I turn on BMW iDrive?
Make sure Bluetooth is turned on in both the automobile and the mobile device before proceeding. Choose Communication > Manage mobile devices > Connect new device* on the iDrive. The Bluetooth name for your BMW is then displayed* after you have selected the necessary features for the device. Simply locate and choose the BMW Bluetooth name from the phone’s Bluetooth menu, then adhere to the directions on the phone’s display and the vehicle’s display. You will be required to verify that the distinct code displayed in the car display matches the code on the majority of cellphones. Pressing OK causes the features to work. The phone appears in the device list after being linked with the vehicle. Only pairing a phone while the car is still is permitted for your protection.
Only applies to automobiles equipped with a professional navigation system. Use the iDrive to select “Add new device” for vehicles equipped with business navigation.
I want to add some apps to my BMW.
Your vehicle will instantly appear whenever you log into the My BMW App if you’ve previously used the BMW Connected App, the ConnectedDrive website, or the My BMW Website.
To link your vehicle if you’re a new user, go into the My BMW App, press “Add Vehicle,” and then follow the on-screen directions. Throughout this process, you will require access to your BMW.
Why won’t my iPhone and BMW pair?
For a safer way to use your iPhone while driving, newer car models offer CarPlay. Verify that this feature is supported by your car. If not, you cannot utilize it. Once you’ve established that your automobile is compatible with CarPlay, check to make sure the feature is configured correctly. What you should do next is as follows:
- Put your iPhone X in your car’s USB port if it supports CarPlay over a wired method. Simply seek for the USB port that has a CarPlay or smartphone icon labeled on it.
- Press the Voice Control buttons and hold the on the steering wheel to set up CarPlay if your vehicle supports wireless CarPlay. Ensure that Bluetooth pairing or wireless mode is active in your vehicle.
- Go to Settings > General > CarPlay > Available Cars on your iPhone X, then pick your vehicle.
- In order for your iPhone to recognize your car, it must be operating.
Consult your car’s manual for more detailed instructions on how to utilize CarPlay on your vehicle.
How can I activate pairing mode on my car?
- Start paring on the stereo in your car. On the stereo in your car, begin the Bluetooth pairing procedure.
- Step 2: Navigate to the setup menu on your phone.
- Step 3: Choose the submenu for Bluetooth Settings.
- Choose your stereo in step four.
- 5. Enter your PIN.
- Enjoy your music in step six.