Putting gas in caused it to turn on. I checked the gas cap, and it was on. I went through my entire service menu and everything was current, including the coolant, brake fluid, and safety stickers.
I’m hoping I can avoid taking it to the dealer because they’ll try to upsell me on other things. I appreciate your time.
Oh, I see, it’s a service interval light. It has no value. For different intervals of your car, they used to have Service I, Service II, and Service III where they would check specific things. Even the dealership no longer operates that way; instead, they will direct you to come in whenever the vehicle indicates a problem.
You don’t have iDrive, I take it. But to start over, do this:
1) Start the engine
2) Press and hold the trip odometer button for 5 seconds until the CBS icons appear.
3) Use the stalk to cycle through them (I believe the BC button is the one you push; don’t hold unless you want to reset that feature).
4) Press and HOLD the BC button when you reach the one you wish to reset. While it resets, you’ll momentarily see a clock icon.
Thanks for your assistance, guys. It was finally reset by me. My fault, I didn’t keep the odo button depressed for long enough for the CBS to remain lit. I was then able to do what Bluewater suggested. Thanks a lot, and Happy New Year!
In This Article...
How to Modify the BMW X3’s Interval Service Reset
The specialists will take care of this part for you if the service is performed at an authorized auto repair facility.
The steps to altering the service interval are as follows:
- Locate the S/R button on the left while seated.
- While inserting and turning your key without starting the vehicle, keep pressing the S/R button.
- Keep pressing the button until the word “RESET” displays.
- Press and hold the S/R button until the “RESET” starts to flash, then release the button briefly.
- Once more, press and release the S/R button. The remaining distance before your next service will be shown.
A malfunction or problem has been detected when the warning lights on a BMW X3 illuminate.
You need to pay attention to every alert in order to keep from damaging your car’s engine even further by continuing to drive it.
If the message is unclear to you, think about getting a certified mechanic to reset.
Even though the service light can signify planned maintenance, it could also be a sign of an urgent problem.
Some of these can be taken care of by the owner of the vehicle without the assistance of a qualified mechanic.
You will still need to reset the service light and set it for the subsequent maintenance cycle even if this occurs.
To assist you in determining the root of the problem, the system will display the engine’s health on the dashboard screen.
How is the check reset on a 2017 BMW x5?
On my 2017 X5, how do I reset (turn off) the service indication message? The navigation screen displays it. We recently had our oil changed, but we declined the service for the cabin air filter. They were altered by me. After replacing the oil, the dealer did not reset the indication.
Do you have any programs or apps similar to BimmerlinK? Or do you have nothing to work with, no tools, etc.?
If the latter is true (nothing), you can use the instrument cluster button to reset the service indicators. YouTube is filled with tutorials that will show you how to do this basic task. Simply search for the manual for any BMW F chassis that features the basic, 6WA, or 6WB cluster. Useless instructions exist for BMWs with E chassis.
Do keep in mind that the instrument cluster test procedure’s commencement is fairly similar, so if you find yourself repeatedly seeing the TEST display rather than the SERVICE reset displays, you’re probably doing something somewhat incorrectly. Return to the videos to see what you might be missing.
By pressing the START button, you essentially turn the automobile on, but you DO NOT start the engine. Once the service you wish to reset appears, press and hold the odometer reset button. Press the odometer reset button and then adhere to the instructions.
The first five screens of my service are displayed here. When these pictures were taken, the service interval for my brake fluid had already passed (it’s orange) from when it was scheduled for the first week of June at the dealer. Their screens are green because I changed the oil and the filters myself because they were due in June 2021. After I finished the work, the dealership reset the brake fluid. I also reset the oil and vehicle inspection.
Even if you didn’t have them perform the vehicle check, you could still take the car back and have them reset the service display for the work they did. However, if you read the instructions and experiment with the reset process, you’ll notice how simple/easy it is to do.
Another piece of advice is that the oil service is made to block numerous short periods, so once it’s reset, you can’t reset it again until you’ve driven a certain number of miles.
The service interval was reset because I did the oil and filter changes myself.
then have them reset the interval so you can view the final two pictures below:
Can a BMW check engine light be reset?
Yesterday when I took my automobile to the mechanic, his new employee handled the most of the work. He did an excellent job, but neglected to turn off my service light. How can I turn off the BMW’s service engine warning?
In less than two minutes, find out if your auto insurance is being overcharged.
Our cars’ service lights frequently stay on because the mechanic forgot to reset them. But occasionally, it can be necessary to address a root problem. Make sure your automobile is in good shape before you reset a BMW service engine light (just to be safe).
By following these procedures, you can turn off the service engine light on your BMW if you’re satisfied it doesn’t require any other repairs:
- Start the ignition, but do not drive. Press the START button if your BMW has one without depressing the brake pedal.
- Hold down the tiny odometer button until a maintenance warning light comes on.
- Press it once more until a reset prompt appears.
- Once more, press and hold it until the message appears. Reset effective.
- To confirm that it was successful, start the car again and again.
You may drive more at ease knowing that your automobile is in top shape now that the service engine light has been reset. Your auto insurance, meanwhile, can be a different matter. There is no warning light that will let you know if you are significantly overpaying or underinsured. To find out for sure and to save hundreds, check out the Jerry app.
Even once Jerry finds you fantastic insurance at a low cost, the discounts keep coming. You will receive fresh, competitive quotations prior to each policy renewal period, ensuring that you always have the finest coverage at the lowest cost. It’s okay if you wish to change policies! Jerry can assist in terminating your old coverage.
What does the BMW car check mean?
A vehicle check is what? A scheduled service called a “BMW vehicle check” makes sure that your BMW vehicle is indeed in excellent shape. We review a wide range of components in this thorough inspection to evaluate the vehicle’s overall performance, roadworthiness, and safety. Inspection Information: examining all safety mechanisms
After an oil change, how do I reset the BMW computer?
My uncle, a retired technician, recently changed the oil in my BMW. The maintenance light is still on, so I suppose he forgot to turn it off. How can I turn off the BMW’s oil-change light?
- Don’t start the engine after turning the ignition on. You should hit the start button instead of depressing the brake pedal if your car has a push-to-start system.
- The service menu will show if you continue to depress the trip reset or odometer button on the instrument cluster. The reset button is normally located to the left of the speedometer, and pressing it for around 10 seconds should bring up the service menu.
- To discover the oil change notice, use the reset button to scroll through the settings. Press the reset button after that.
- Depending on the model, you might have to scroll through the options using the controls on the turn signal lever until you come across a prompt asking you if you’d like to reset the warning. Then, to reset the turn signal, press the BC button at the lever’s end.
- When prompted, press and hold the reset or BC button until the display indicates that the device is resetting.
You can save money on automobile expenses by having friends or relatives work on your vehicle, but employing Jerry can help you save money on extra expenses like auto insurance. The typical user of Jerry saves $887 annually on auto insurance.
Don’t be afraid to alter insurance or payment plans because you’re concerned about the extra labor. Jerry takes care of all the paperwork and even assists with canceling your previous insurance! Additionally, you can text one of our agents using the app if you have any questions along the route. They’ll be there for you whenever you need them.
Can I manually reset the check engine light?
You might have requested for assistance with a computer problem if you’ve ever worked in an office setting with an IT department.
Probably the first thing your IT wizard asked was, “Have you tried resetting your computer?”
The analogous repair for a car’s check engine light is the on-off technique. It compels the computer to reboot and restore its previously saved state.
Simply switch the ignition on for 1-2 seconds, then off for 1-2 seconds, using your key. Three or four times through, repeat this step.
If the check engine light is still on after the reset, your car might still be having issues. Think about using the OBD2 scanner to check for the error code or taking your car to a qualified repair.
Can I operate a BMW with the check engine light on?
A constant glow normally denotes something less serious, but a check engine light that flashes suggests your car’s engine is seriously damaged and needs quick repair. We strongly advise not operating your BMW while the check engine light is flashing and setting up BMW servicing right away.
What is the time required for a BMW computer to reset?
My automobile won’t turn over. After some web study, it appears that the ECU is most likely the problem. How can the factory settings be restored on a BMW computer?
Amazing investigative abilities! Unplugging the negative battery cable for 10 to 15 minutes will reset a BMW ECU. For most BMW models, this ought to be sufficient to reset the ECU.
You can also try jumpstarting your car to reset it if this doesn’t work. If a low battery is the problem, this will also be helpful!
However, if you still have trouble starting your car after jumping the battery, you should speak with a mechanic to find out more about what’s going on.
Save money on your car insurance with the Jerryaan insurance comparison app, which searches for inexpensive prices with more than 50 different insurance companies for free. This will help offset the cost of expert repairs.
You may make adjustments at any time, receive prices instantly, and text an agent with any queries you may have. Each year, $887 is saved by the typical Jerry user.