At the front of the center console, push and hold the red arrow-depicted reset tire pressure button. Holding down the button causes the TPM light to turn on and off.
In This Article...
How To Reset The FTM Tire Pressure Monitor Light For A BMW X3 (E83 F25 G01)
Resetting the FTM Tire Pressure Monitor Light on a BMW X3 (E83 F25 G01) The smaller X model from the German automaker BMW is called the X3. It is a 5-door SUV, or “sports utility vehicle,” similar to the slightly roomier BMW X5.
In January 2004, work on the first-generation X3, E83, began. Two diesel engines (a 2.0d with 150 horsepower and a 3.0d with 204 hp) and three petrol engines (a 2.0i with 150 hp, a 2.5i with 192 hp, and a 3.0i with 231 hp) were offered.
On a BMW x3 2021, how do you reset the tire pressure light?
Click car, vehicle status, tire settings, and tire pressure monitor from the home menu. Select to do a reset when the automobile is stopped and the engine is running. For the reset to be completed, you will need to take a little drive.
What tire pressure is recommended for a 2022 BMW X3?
Although 32 PSI (pounds per square inch) is the recommended tire pressure for the majority of BMW tires, you should always double-check by looking at the sticker on the inner edge of the driver’s door.
What pressure should my BMW tires be at?
To ensure a safe ride, you should check the tire pressure on your BMW. Although 32 PSI (pounds per square inch) is the recommended tire pressure for most BMW models, you should always double-check by examining the sticker on the inside edge of the driver’s door.
How can my BMW 3 Series be reset?
The mechanic will reset the computer in your BMW after the service is complete so it can record your mileage and let you know when the car will need maintenance again in the future. However, the techniques listed below can help you if you maintain your own car but are unclear of how to reset the computer system.
- With the engine off, turn the key to the ON position.
- For TEN seconds, press and HOLD the ODOMETER button. It can be found at the Instrument Cluster’s extreme bottom LEFT corner.
- The dash screen will display FGSTNR along with a number. Your chassis number is this (See image example).
- The LAST FOUR numerals are added. Ex: 3+4+5+6= 18 (taken from the image above). Your UNLOCK CODE is going to be 18.
- Press and hold the ODOMETER button one more until the FGSTNR clearing area appears (you will still see numbers in the top section).
- Press the odometer button until the upper Menu area (entering code menu) reaches 19 after the bottom area has cleared; When you do, the text will appear at the bottom: Press the odometer button to enter your unlock code after turning the lock on (from the example above) This is seen in the bottom portion.
- The screen will appear as in the image above after a little period, at which point the menu will once again appear at the top. To access the number 21 menu, press the odometer button (also theentering code menu).
- On the screen’s bottom, it will say: RESET? To complete the reset, press the odometer button.
Your BMW’s computer has been restarted! The existing settings must now be added again, or new ones must be added.
**NOTE: Slowly repeat the procedures if you are unable to reset the BMW computer on your first attempt. If you’re still having trouble, ask the dealership for help or refer to your car’s owner’s manual.
My tire pressure warning light won’t go out.
When the tire pressure light blinks three times, release pressure on the TPMS reset button. Start the car and let it run for 20 minutes to let the sensor reset. Under the steering wheel is normally where you’ll find the reset button for the tire pressure monitor. If you can’t find it, consult the owner’s manual for your vehicle.
How big are the tires on a BMW X3?
BMW X3 Tire Size 2021 The P245/50HR19, P225/60HR18, P245/45ZR20, and P265/45ZR20 tire widths are available for the 2021 BMW X3. Wheel (rim) sizes for the 2021 BMW X3 are 19 x 7.5, 18 x 7, 20 x 9, and 20 x 10.
Why does my BMW always report low tires?
What it means: Your vehicle’s tire pressure will be too low and the BMW tire pressure monitoring system (TPMS) will notify you. When air pressure is 25% below the usual suggested pressure for your BMW model, the warning light turns on. Low tire pressure could put your BMW at danger for tire failure, excessive tire wear and tear, handling issues, and decreased fuel efficiency.
What to do if it comes on: Turn off your car and check the pressure in each tire if the TPMS light comes on when you start it. Ensure that the tires are inflated to the optimum pressure. The recommended tire pressure is printed in your owner’s handbook or on a placard inside the driver-side door of your car.
Find a gas station with air pumps, check the tire pressure, and add air as necessary if the TPMS indicator illuminates while you are driving. The TPMS light will also come on if your tire suddenly flattens as a result of damage. Pull over right away and inspect your tires if you see this light and experience a difference in how your car handles. Many BMW automobiles come with run-flat tires already mounted from the manufacturer with no spare tire. If so, move cautiously to a BMW service center in the area. You will need to hire a tow truck if you have fitted aftermarket tires that are not run flats.
It often denotes a TPMS malfunction if the indicator glows and flashes. The first step is to check the pressure in each of your tires once more and add air if needed. Your best option is to take it to a qualified BMW mechanic for diagnosis if the TPMS light is still on after adding air.
Note: Extreme weather changes can have an impact on tires, particularly in the colder winter months. It’s a good idea to inspect your tires each month.
What actions are required to turn off the light: If your tire pressure is too low, you should fill them up with air and then reset your TPMS (see the directions in your owner’s manual to do this). If this doesn’t work, you’ll need to visit your local BMW repair shop for an accurate diagnosis.
Why won’t my tire pressure warning light turn on?
When the TPMS warning light illuminates, proceed with caution. This indicates that at least one of your tires may be at least 25% under-inflated.
*The simplest way to get the most accurate reading is to check the tire pressure before you drive on it when the tire is “cool.” If your TPMS light is on, first check that you have correctly reset your TPMS by following these instructions.
Will my TPMS light automatically turn off if I fill my tires with air after it illuminates?
Several minutes after reinflating the tires to the prescribed pressure, the TPMS light ought to go out.
What happens if I adjust the tire pressure but the light on my tire pressure gauge still doesn’t go out?
The only place that can fix a computer issue that causes the TPMS warning light to turn ON and flash ON for one second and OFF for three seconds is the dealership service center. When the TPMS warning light illuminates and remains on, one or more tires may have low tire pressure. The light ought to go out once the tire is inflated to the recommended tire pressure listed on the door placard. Always check the pressure in all of your tires because one or more of them may not be at the proper pressure.
Why, after filling the tires, is the tire pressure light still on?
If you’ve inflated your tires, but the air pressure warning light continues to flash, your tire pressure monitoring system is malfunctioning or you have a gradual leak. A bright TPMS warning light indicates a problem with a tire pressure sensor, assuming there isn’t a leak in your tire. One of them might be damaged, the lithium-ion battery might be dead, or the TPMS itself might have an internal problem. You’ll need to get your Tire Pressure Monitoring System repaired in any of these scenarios.
Quick Tip: Recheck the tire to ensure it is inflated to the correct air pressure if the TPMS warning light illuminates again after you have inflated it. Low tire pressure indicates an air leak, which requires repair or tire replacement.
Can the tire pressure monitoring system be turned off?
Yes, it is possible to disable your tire pressure monitoring device using a smart, non-intrusive approach. You only need to use an emulator created to get around the TPMS. The TPMS bypass emulator is a tiny box-shaped gadget containing technology that allows you to “switch off” your tire pressure monitoring system.
I have a tire pressure warning light on. Can I drive?
Yes, you can keep driving with the warning light on unless you have a completely flat tire. However, don’t wait too long to carry out the checking process. Tyres that are underinflated should never be driven on.
Of course, you can always visit a nearby major dealer garage like Brayleys if you have any questions concerning the tires on your car or would like expert advise on the proper tyre pressure.
We constantly have a wide range of tire specials, and our prices are unbeatable. Find out about our servicing offers if you’re also curious.
The state of your tires is an important aspect of routine car maintenance. The ideal time to check your tires’ condition and pressure is once every week. And even if the TPMS system is designed to protect you, that doesn’t mean you should disregard the value of routine auto maintenance.
Why are my tires in good condition but my tire pressure sign is on?
It’s likely that one or more of your tires have low air pressure if you see the tire pressure indicator turn on. However, even if your tires are in good condition, there are a number of things that could cause the sensors to go off, so you shouldn’t rely only on the data from the tire pressure monitoring system of your car.
Will the tire pressure light automatically turn off?
Tire pressure can be impacted by overnight temperature variations or by cold winter days. The low-pressure indicator may then display as a result of this. The pressure in your tires can change by up to 10 PSI when there are significant temperature changes between day and night.
After about 20 minutes of driving, the light may turn off on its own when the right inflation level stabilizes and the air in your tires warms and expands.
In any case, you ought to have your air checked immediately. Your tires are at least 25% underinflated, according to the TPMS light. This poses a risk to your safety, especially if the load is close to your vehicle’s maximum load capacity. There is a higher possibility of tire failure, degraded handling, and increased tire wear and tear. Your fuel economy may also suffer.
Should the TPMS be reset after purchasing new tires?
After changing or rotating your tires, or after adding new sensors, you should always reset your TPMS. Even after you have inflated your tires, some sensor manufacturers advise restarting the device. By teaching the primary TPMS system to identify the sensors in their new locations, resetting the TPMS is frequently referred to as retraining the system. TPMS reset procedures vary from vehicle to vehicle and typically involve a specific sequence of ignition and pedal actions, a configuration change in your dashboard menu, or the use of a TPMS Reset Tool.