The newer BMW models contain a feature known as a tire pressure control display that determines whether the tires have the right quantity of air in them. This operates by increasing the measured number of tire revolutions as the radius of the car tire decreases owing to less air.
Since most tires have different designs when compared to one another, the issue arises when switching from winter to summer tires and vice versa and causes the tire pressure control display on the on-board computer to activate. Fortunately, BMW automobiles have a reset button for the tire pressure control display.
You can use the iDrive system to verify the status of your car if the tire-pressure warning symbol displays in the instrument cluster or in alerts.
Select My vehicle from the main menu, then tap Vehicle status, and then check the icon for the Tire Pressure Monitor to turn it on. Your tires’ current pressure is shown on the tire pressure meter. If you got a warning, it advised you to reset the device by selecting Perform reset on the TPMS information screen.
After the reset, if all tires display green, the pressure is accurate. Incorrect pressure is indicated by a red accent on a tire.
In This Article...
Tire Pressure Monitoring System (TPMS) Light Reset by BMW
The TPMS (Tire Pressure Monitoring System) on a BMW is designed to warn you when a tire’s pressure is too low and might result in hazardous driving conditions. If the indicator is on, your tires may not be properly inflated, which might result in premature tire wear and even tire failure. It’s crucial to comprehend the significance of appropriate tire inflation and how TPMS can aid with tire maintenance.
TPMS RESET COMPILATION FOR BMW
1. Fill up all tires to the recommended pressure on the tire placard.
2. With the engine off, set the ignition to the ON/RUN position.
3. Choose Settings or Vehicle Info with the help of the iDrive controller.
4. Choose the Vehicle, Vehicle/Tires, or Vehicle Status option.
5. Choose from Perform Reset, Reset TPM, or TPM.
Start the engine, choose Reset, and then click Yes.
7. Select the media button on the center console.
8. To complete retraining, vehicle must be driven for up to 10 minutes at a speed of 25 MPH or higher.
Learn Again Procedure for Models Without iDrive:
2. Turn the ignition on.
3. Adjust the turn signal toggle switch such that the REST and TPMS indicators are visible.
4. Depress the button at the lever’s tip to activate the turn signal.
5. Hold down the button at the end of the turn signal lever while pressing it until RESETTING or a checkmark appears on the screen.
6. To complete retraining, vehicle must be driven for up to 20 minutes at a speed of 20 MPH or higher.
Models without iDrive must follow the relearn procedure (only some models):
3. When the TPMS light appears on the gauge cluster, press and hold the TPMS Reset button (behind the hazards switch or in front of the gear selector).
4. To complete retraining, vehicle must be driven for up to 20 minutes at a speed of 20 MPH or higher.
After changing your tires, how do you reset the sensor?
Turn the key to the “on” position with the car off, but don’t let it run. When the Toyota tire pressure sensor blinks three times, hold down the TPMS reset button until it stops blinking. Start the car, then let it run for 20 minutes to let the sensor reset. Under the steering wheel is typically where you’ll find the TPMS reset button.
Why, after filling my tires with air, is my tire pressure light still on, BMW?
If you’ve inflated your tires, but the air pressure warning light continues to flash, your tire pressure monitoring system is malfunctioning or you have a gradual leak. A bright TPMS warning light indicates a problem with a tire pressure sensor, assuming there isn’t a leak in your tire. One of them might be damaged, the lithium-ion battery might be dead, or the TPMS itself might have an internal problem. You’ll need to get your Tire Pressure Monitoring System repaired in any of these scenarios.
Quick Tip: Recheck the tire to ensure it is inflated to the correct air pressure if the TPMS warning light illuminates again after you have inflated it. Low tire pressure indicates an air leak, which requires repair or tire replacement.
How can I stop the pressure in my tires?
Don’t start the car; just turn the key to “on.” Till the tire pressure light blinks three times, press and hold the TPMS reset button. Press the button again to start the vehicle. The light ought to turn off in 20 minutes.
How much time does the tire sensors take to reset?
Start the car, then wait for the sensor to refresh for around 20 minutes. Under the steering wheel is normally where you’ll find the reset button for the tire pressure monitor. If you can’t find it, consult your owner’s manual. Tires should be inflated to the recommended pressure, then completely deflated.
How can my BMW 3 Series be reset?
The mechanic will reset the computer in your BMW after the service is complete so it can record your mileage and let you know when the car will need maintenance again in the future. However, the techniques listed below can help you if you maintain your own car but are unclear of how to reset the computer system.
- With the engine off, turn the key to the ON position.
- For TEN seconds, press and HOLD the ODOMETER button. It can be found at the Instrument Cluster’s extreme bottom LEFT corner.
- The dash screen will display FGSTNR along with a number. Your chassis number is this (See image example).
- The LAST FOUR numerals are added. Ex: 3+4+5+6= 18 (taken from the image above). Your UNLOCK CODE is going to be 18.
- Press and hold the ODOMETER button one more until the FGSTNR clearing area appears (you will still see numbers in the top section).
- Press the odometer button until the upper Menu area (entering code menu) reaches 19 after the bottom area has cleared; When you do, the text will appear at the bottom: Press the odometer button to enter your unlock code after turning the lock on (from the example above) This is seen in the bottom portion.
- The screen will appear as in the image above after a little period, at which point the menu will once again appear at the top. To access the number 21 menu, press the odometer button (also theentering code menu).
- On the screen’s bottom, it will say: RESET? To complete the reset, press the odometer button.
Your BMW’s computer has been restarted! The existing settings must now be added again, or new ones must be added.
**NOTE: Slowly repeat the procedures if you are unable to reset the BMW computer on your first attempt. If you’re still having trouble, ask the dealership for help or refer to your car’s owner’s manual.
Why won’t my tire pressure warning light turn on?
If your tires are properly inflated yet the warning light continues to illuminate, you may have a leak or a TPMS issue in one or more of your tires. To determine if a tire has a leak is not difficult. Simply double-check the air pressure in each of your tires with your tire gauge. If all of the tires have the proper air pressure, one or more tire pressure sensors are likely to be at fault, necessitating repair work on your tire pressure monitoring system. You’ll need to replace or repair the tire if you notice that one or more of your tires’ air pressures have fallen.
My tire pressure is fine, so why won’t the light go off?
When the TPMS warning light illuminates, proceed with caution. This indicates that at least one of your tires may be at least 25% under-inflated.
*The simplest way to get the most accurate reading is to check the tire pressure before you drive on it when the tire is “cool.” If your TPMS light is on, first check that you have correctly reset your TPMS by following these instructions.
Will my TPMS light automatically turn off if I fill my tires with air after it illuminates?
Several minutes after reinflating the tires to the prescribed pressure, the TPMS light ought to go out.
What happens if I adjust the tire pressure but the light on my tire pressure gauge still doesn’t go out?
The only place that can fix a computer issue that causes the TPMS warning light to turn ON and flash ON for one second and OFF for three seconds is the dealership service center. When the TPMS warning light illuminates and remains on, one or more tires may have low tire pressure. The light ought to go out once the tire is inflated to the recommended tire pressure listed on the door placard. Always check the pressure in all of your tires because one or more of them may not be at the proper pressure.
When changing tires, do TPMS sensors need to be reprogrammed?
Start with a visual investigation when determining what is causing the TPMS warning light to illuminate. What year was the car made? The tires appear to be low or flat. Is the sidewall, tread, or rim physically damaged?
The problem can be resolved if it is identified. A sensor may be damaged or dead, a tire may need air, repair, or replacement, and a rim may need to be replaced due to damage. You might need to reprogramme the system each time a tire is changed or relocated on the car, when new TPMS sensors are installed, or both.
Manufacturers have established specific procedures to put the vehicle in learn mode and program sensors while replacing or recalibrating the sensors. When tires are rotated, some vehicles’ sensors may automatically relearn them. The majority of TPMS sensors, however, need your intervention to retrain or reprogramme them. A solo or connected TPMS tool can be utilized to quickly reset and relearn sensors, saving time. You can relearn things with the help of some tools. This entails reading each sensor and placing the system in learn mode. Relearning processes are also included in some diagnostic scan instruments.
What is the turnaround time for TPM BMW reset?
When the tire pressure light blinks three times, release pressure on the TPMS reset button. To allow the sensors to reset, start the automobile and let it run for 20 minutes.
Should the TPMS be reset after purchasing new tires?
After changing or rotating your tires, or after adding new sensors, you should always reset your TPMS. Even after you have inflated your tires, some sensor manufacturers advise restarting the device. By teaching the primary TPMS system to identify the sensors in their new locations, resetting the TPMS is frequently referred to as retraining the system. TPMS reset procedures vary from vehicle to vehicle and typically involve a specific sequence of ignition and pedal actions, a configuration change in your dashboard menu, or the use of a TPMS Reset Tool.
How long are the TPMS sensors made by BMW?
The Tire Pressure Monitoring System, which notifies you when a tire is dangerously low on air, typically uses TPMS sensors embedded in the tires to detect low tire pressure. The majority of TPMS sensors use internal batteries that cannot be changed to power them.
The lithium ion batteries in a TPMS sensor have a lifespan of 5 to 10 years. The duration of the TPMS sensor batteries is difficult to predict because it depends on how many radio frequency broadcasts the sensors send out. The amount of driving you perform over time and the conditions you drive in will affect the sensor battery life. The TPMS battery life is less affected by cold conditions than by warmer ones. When compared to continuous pace, stop-and-go traffic has a greater effect on TPMS battery life. This is due to the fact that sensors send out more radio frequency broadcasts as a vehicle changes its speed.
The system will issue a malfunction warning when a TPMS sensor’s battery runs out, which will be visible as a blinking TPMS light on your dashboard. After 60 to 90 seconds, the light may either continue to flash or turn solid. Be a repair appointment as soon as you can if you receive this warning, but also check the tire pressure in each tire right away to make sure you have safe inflation all around.
You can change each individual TPMS sensor separately if one of them malfunctions and needs to be replaced. The other sensors, on the other hand, are probably on the verge of failing as well if the failure was brought on by a dead sensor battery. You might wish to proactively replace all the sensors so you have brand-new sensor batteries all around when you take into account the time and hassle of taking your car off for a sensor replacement.