How To Reset Service On BMW E90?

I’m going to use a short YouTube video I previously made to demonstrate how to reset your service lights. All you need to do is push a few buttons on your car, no tools or other equipment are needed.

the following steps:

Press the start button after inserting a key into the ignition. Hold off until every check-light and beeping has stopped. To reset the odometer, press and hold the brake pedal until a yellow triangle appears. After that, let go of the odometer reset button and use the scroll on the left side of the steering wheel to locate the icon you wish to reset the service light for. The reset light will turn on when you press the top button (the BC button) on the left control handle. Press it once more and hold it for a little while. That ought to finish it. Until you have completed everything that needs to be done, you can scroll. Take a keyfob out once you’re finished, and you’re all set to go!

Excellent Post—it took a few tries to get the sequence just right, but the final result (3 minutes) worked flawlessly! Continue the excellent work!

Make sure to keep holding the brake and odometer through the yellow triangle so that the service reset menu will automatically open.

MANY THANKS TO DIMSUM!!!!! I recently had an AC icon crop up, and I just reset it today after seeing your video. In addition, the closest dealer is 1500 kilometers away. I believe I owe you a case of beer, but we are on the opposite end of the city. I was raised on the west shore. Anyway, I appreciate it very lot.

The “not sure what this is” is an emissions and roadworthiness test. This is more of a reminder to schedule an inspection and emissions test for your state, county, municipality, etc. than it is evidence of a problem. I appreciate the reset details…

service light for oil, reset BMW E90

  • Without putting your foot on the brake, insert your remote key into the keyhole and click the START button once. The dash should illuminate with a number of lights.
  • The dashboard’s screen will display an exclamation point in the center.
  • .
  • Hold the button down while waiting for the subsequent image to display before releasing.
  • As soon as you get to the inspection service light that has to be reset, press and hold the BC button on the signal handel until the word Reset appears under the image, and then release.
  • The oil service light is depicted below.

This is the whole process to reset the oil service light on a BMW E90. After an oil change, you can choose to reset any maintenance oil lights. Or, when maintenance is required for BMW cars, reset the check engine light, airbag light, inspection key, or insp faults. or any problem that pops up on the screen. Enter the name of the car you are looking for information about in the search box to learn how to reset other service reminders on your own.

You can find solutions to your automotive troubles on this informational website. If our processes are correct, please leave a remark. If you would want to add anything, please do so. We value all viewpoints.

Oil Reset for BMW 3 Series E90/E91/E92/E93

BMW 3 Series with oil reset Models E90/E91/E92/E93 (316d,316i,318d,318i,320d,320d ED,320i,320si,323i,325d,325i,328i,330d,330i,335d,335i,335is,M3,M3 GTS) from 2004 to 2013 are covered for the entire year.

  • With the engine off, set the ignition to the ON position (close all doors and windows and put the vehicle in park)
  • Press and hold the brake pedal and the TRIP button until the warning triangle displays after allowing all of the warning lights to turn off and the warning tone to cease beeping.
  • As soon as the warning triangle appears to show the first service symbol, immediately release the TRIP button.
  • Cycle through the service items using the BC button on the turn signal switch until the oil change icon appears.
  • Hold the BC button down for three to five seconds until the word “Reset” shows on the display.
  • When the time clock appears on the display once more, release the BC button and press and hold it for another 3 to 5 seconds.
  • To return to the service item screen, let go of the button.

* Reset any additional services by using the same procedure as above (Reset your oil life counter, brake life counters, and many others)

  • Turn the ignition to the OFF position and let off of the brake when all resets have been completed.

BMW 318i, 320i, and 335i (E90, E91, E92, and E93) Oil Light Reset, 2007–2013

I’ll demonstrate in this section how to reset the service intervals on your car when they approach. Therefore, it may be for the brake pads, brake fluid, vehicle check, or engine oil, for instance. As a result, you should:

You want to start the engine, but you turn on the ignition.

First, I’m not going to put my foot on the brake or clutch; instead, I’m only going to hit the START button once to turn on the dash light.

Press and hold the RESET MILES button.

You need to simply hold down the button on the left side of the dash that you typically press to reset your trip if you want to accomplish this. Therefore, press it in until a service item appears on the screen.

  • To scroll the service minders you want to reset, momentarily press the UP or DOWN button on the stalk.

Using the orV button on the turn signal lever, you can scroll between the various things once the service item appears. I’ll scroll down now, and as you can see, it will say things like front brakes, vehicle check, oil brake, fluid brakes, front brakes, etc.

Keep holding down the BC button.

You must put the Engine Oil icon on the screen because we will be resetting the oil. It will then prompt you to reset it now if you continue to press down the BC button on the stalk.

To finalize the reset, let go and then hold it once more.

Then you must press and hold the BC button one more. After a brief timer appears and resets, you are finished.

For your information, this operation is for the fifth-generation BMW 3-Series, model numbers E90, E91, E92, and E93 (1997, 1998, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 model years). You can access the most recent model here.

How Can I Get Rid of My BMW’s Overdue Service?

As previously mentioned, a service light that is past due can be taken out. Follow these steps if your oil change light has come on.

  • Holding down the miles tripping button until the first service light appears can help you locate the service light.
  • Navigate through the numerous service lights until you find the button for changing the oil.
  • Push the BC button until “Reset” appears.
  • Once the clock appears, you have reset the light. Hold down the BC button for a few seconds. The screen will display the reset mileage and the next service required date.

Any automobile will have a variety of service interval light indications, so it’s a good idea to understand what they are and what they mean.

How can I restart my BMW’s service?

  • Start the electrical systems of the car, but do not start the engine.
  • Till the service notice shows, press and hold the tiny odometer button in the instrument panel’s lower left corner.
  • When the message says “Reset,” let go of the button and press and hold it once more.

How can my BMW 3 Series be reset?

The mechanic will reset the computer in your BMW after the service is complete so it can record your mileage and let you know when the car will need maintenance again in the future. However, the techniques listed below can help you if you maintain your own car but are unclear of how to reset the computer system.

  • With the engine off, turn the key to the ON position.
  • For TEN seconds, press and HOLD the ODOMETER button. It can be found at the Instrument Cluster’s extreme bottom LEFT corner.
  • The dash screen will display FGSTNR along with a number. Your chassis number is this (See image example).
  • The LAST FOUR numerals are added. Ex: 3+4+5+6= 18 (taken from the image above). Your UNLOCK CODE is going to be 18.
  • Press and hold the ODOMETER button one more until the FGSTNR clearing area appears (you will still see numbers in the top section).
  • Press the odometer button until the upper Menu area (entering code menu) reaches 19 after the bottom area has cleared; When you do, the text will appear at the bottom: Press the odometer button to enter your unlock code after turning the lock on (from the example above) This is seen in the bottom portion.
  • The screen will appear as in the image above after a little period, at which point the menu will once again appear at the top. To access the number 21 menu, press the odometer button (also theentering code menu).
  • On the screen’s bottom, it will say: RESET? To complete the reset, press the odometer button.

Your BMW’s computer has been restarted! The existing settings must now be added again, or new ones must be added.

**NOTE: Slowly repeat the procedures if you are unable to reset the BMW computer on your first attempt. If you’re still having trouble, ask the dealership for help or refer to your car’s owner’s manual.

What should I do after changing the oil in my BMW?

My uncle, a retired technician, recently changed the oil in my BMW. The maintenance light is still on, so I suppose he forgot to turn it off. How can I turn off the BMW’s oil-change light?

In less than two minutes, find out if your auto insurance is being overcharged.

  • Don’t start the engine after turning the ignition on. You should hit the start button instead of depressing the brake pedal if your car has a push-to-start system.
  • The service menu will show if you continue to depress the trip reset or odometer button on the instrument cluster. The reset button is normally located to the left of the speedometer, and pressing it for around 10 seconds should bring up the service menu.
  • To discover the oil change notice, use the reset button to scroll through the settings. Press the reset button after that.
  • Depending on the model, you might have to scroll through the options using the controls on the turn signal lever until you come across a prompt asking you if you’d like to reset the warning. Then, to reset the turn signal, press the BC button at the lever’s end.
  • When prompted, press and hold the reset or BC button until the display indicates that the device is resetting.

You can save money on automobile expenses by having friends or relatives work on your vehicle, but employing Jerry can help you save money on extra expenses like auto insurance. The typical user of Jerry saves $887 annually on auto insurance.

Don’t be afraid to alter insurance or payment plans because you’re concerned about the extra labor. Jerry takes care of all the paperwork and even assists with canceling your previous insurance! Additionally, you can text one of our agents using the app if you have any questions along the route. They’ll be there for you whenever you need them.

How can I view the service records for my BMW?

How to Do It! If your car has iDrive, you may retrieve the service history by going to Vehicle Information -> Vehicle Status -> Service Requirements -> Service History. You may see illustrations that outline each step on the left side of the page.