My uncle, a retired technician, recently changed the oil in my BMW. The maintenance light is still on, so I suppose he forgot to turn it off. How can I turn off the BMW’s oil-change light?
In less than two minutes, find out if your auto insurance is being overcharged.
- Don’t start the engine after turning the ignition on. You should hit the start button instead of depressing the brake pedal if your car has a push-to-start system.
- The service menu will show if you continue to depress the trip reset or odometer button on the instrument cluster. The reset button is normally located to the left of the speedometer, and pressing it for around 10 seconds should bring up the service menu.
- To discover the oil change notice, use the reset button to scroll through the settings. Press the reset button after that.
- Depending on the model, you might have to scroll through the options using the controls on the turn signal lever until you come across a prompt asking you if you’d like to reset the warning. Then, to reset the turn signal, press the BC button at the lever’s end.
- When prompted, press and hold the reset or BC button until the display indicates that the device is resetting.
You can save money on automobile expenses by having friends or relatives work on your vehicle, but employing Jerry can help you save money on extra expenses like auto insurance. The typical user of Jerry saves $887 annually on auto insurance.
Don’t be afraid to alter insurance or payment plans because you’re concerned about the extra labor. Jerry takes care of all the paperwork and even assists with canceling your previous insurance! Additionally, you can text one of our agents using the app if you have any questions along the route. They’ll be there for you whenever you need them.
In This Article...
Models With a Diagnostic Connector in the Engine Compartment
- Turn the ignition switch to the ON position to clear the SIA OIL SERVICE indicator on the instrument cluster. Connect the diagnosis connector in the engine compartment to the Service Indicator Resetter (62 1 110). see picture
- Activate the yellow OIL SERVICE button. A green LED will start to glow. Wait till the Yellow LED turns on. and then leaves once more. Reset the OIL SERVICE indication, if necessary.
- Press the Red INSPECTION service button for inspection to reset the SERVICE INTERVAL indicator. A green LED shines. Wait until the red LED starts to glow before continuing. To adjust the time between the yearly inspection and the inspection, turn the ignition switch to the OFF position, wait 20 seconds, and then repeat the process. Reset the SERVICE INTERVAL indication, if necessary.
BMW 328i 318i (F30/F31) Oil Light Reset, 2012–2018
Okay, gentlemen. Today’s service vehicle is a 2014 BMW 3 series with an F30 body. So, now that the service has been completed, we’ll reset the service light.
Switch on your vehicle without turning the key
Now that we are inside the car, you will need to push the START button twice without stepping on any pedals once you have the key within the cabin.
Press and hold the RESET MILES button.
You need to push and hold a button on the dash’s left side until the service icon appears on the display.
Discover the engine oil.
Just briefly press the RESET MILES button to cycle through the service lights until you find the one you wish to reset. You can find the meanings of the symbols down here if you’re curious.
Push and hold the button until a reset question appears because we need to reset the engine oil.
To confirm the reset, let go of the button and then hold it once more.
One “perform reset” appears, release it briefly before pressing and holding it down once again to complete the reset.
How can my BMW 3 Series be reset?
The mechanic will reset the computer in your BMW after the service is complete so it can record your mileage and let you know when the car will need maintenance again in the future. However, the techniques listed below can help you if you maintain your own car but are unclear of how to reset the computer system.
- With the engine off, turn the key to the ON position.
- For TEN seconds, press and HOLD the ODOMETER button. It can be found at the Instrument Cluster’s extreme bottom LEFT corner.
- The dash screen will display FGSTNR along with a number. Your chassis number is this (See image example).
- The LAST FOUR numerals are added. Ex: 3+4+5+6= 18 (taken from the image above). Your UNLOCK CODE is going to be 18.
- Press and hold the ODOMETER button one more until the FGSTNR clearing area appears (you will still see numbers in the top section).
- Press the odometer button until the upper Menu area (entering code menu) reaches 19 after the bottom area has cleared; When you do, the text will appear at the bottom: Press the odometer button to enter your unlock code after turning the lock on (from the example above) This is seen in the bottom portion.
- The screen will appear as in the image above after a little period, at which point the menu will once again appear at the top. To access the number 21 menu, press the odometer button (also theentering code menu).
- On the screen’s bottom, it will say: RESET? To complete the reset, press the odometer button.
Your BMW’s computer has been restarted! The existing settings must now be added again, or new ones must be added.
**NOTE: Slowly repeat the procedures if you are unable to reset the BMW computer on your first attempt. If you’re still having trouble, ask the dealership for help or refer to your car’s owner’s manual.
How can my oil sensor be reset?
Clean the oil filler cap if you can. Use the BC button to cycle through the selections on the gauge cluster until the oil level reading appears. After that, hold the BC button down until the clock appears, indicating that the gauge cluster is resetting. only possible when the car is idle and at operational temperature
How long does the BMW take to reset?
My automobile won’t turn over. After some web study, it appears that the ECU is most likely the problem. How can the factory settings be restored on a BMW computer?
Amazing investigative abilities! Unplugging the negative battery cable for 10 to 15 minutes will reset a BMW ECU. For most BMW models, this ought to be sufficient to reset the ECU.
You can also try jumpstarting your car to reset it if this doesn’t work. If a low battery is the problem, this will also be helpful!
However, if you still have trouble starting your car after jumping the battery, you should speak with a mechanic to find out more about what’s going on.
Save money on your car insurance with the Jerryaan insurance comparison app, which searches for inexpensive prices with more than 50 different insurance companies for free. This will help offset the cost of expert repairs.
You may make adjustments at any time, receive prices instantly, and text an agent with any queries you may have. Each year, $887 is saved by the typical Jerry user.