Press the start/stop button to turn on the 2017 BMW 328i in order to turn off the oil service light. Make sure to avoid starting the car. The Set/Reset button will then be pressed and held for approximately 10 seconds. It will turn on the service indicator light. Cycle through the service menu using the Set/Reset button until “Reset Executable” appears. To begin the reset, press and hold the button for three seconds. A progress bar will be displayed for you. Once finished, a notification indicating that the reset was successful will appear on the screen. Start the engine after turning off the ignition to make sure the reset was successful. The oil light ought to have disappeared.
Press the gas pedal carefully three times while turning the ignition key to the “on” position to clear the maintenance or oil level warning light on your 2016 BMW 328i. Release the clutch, then restart your car to see the oil light reset.
In This Article...
One time press the start/stop button
2. To make the service indicator light appear, press and hold the Set/Reset button for 10 seconds. Scroll the service menu by repeatedly pressing the Set/Reset button.
3. If the service item is past due, the message “Reset executable” will appear. By holding down the Set/Reset button for 3 seconds, the reset will begin.
4. You’ll see the message “Execute reset?” Press the Set/Reset button one more for three seconds to confirm the reset. ‘Reset running’ will be indicated on a progress bar.
5. The message “Reset successful” is displayed to validate the reset.
6. Switch off the ignition. To make sure the indicator has been reset, start the engine.
BMW 328i 318i (F30/F31) Oil Light Reset, 2012–2018
Okay, gentlemen. Today’s service vehicle is a 2014 BMW 3 series with an F30 body. So, now that the service has been completed, we’ll reset the service light.
Switch on your vehicle without turning the key
Now that we are inside the car, you will need to push the START button twice without stepping on any pedals once you have the key within the cabin.
Press and hold the RESET MILES button.
You need to push and hold a button on the dash’s left side until the service icon appears on the display.
Discover the engine oil.
Just briefly press the RESET MILES button to cycle through the service lights until you find the one you wish to reset. You can find the meanings of the symbols down here if you’re curious.
Push and hold the button until a reset question appears because we need to reset the engine oil.
To confirm the reset, let go of the button and then hold it once more.
One “perform reset” appears, release it briefly before pressing and holding it down once again to complete the reset.
Resetting the F30 Oil Service Light on a BMW 3-Series
On a sixth-generation BMW 3-series, which would be an F30 chassis from 2011 to 2018 finish up, this short process demonstrates how to reset the service reminder. All you have to do is: since it’s fairly easy.
One the ignition is turned on, press the START button once more to make sure your foot is not on the brake. Despite your desire, you simply switch the ignition on.
Keep pressing the TRIP button.
After then, we must continue to hold down the TRIP button over here until a service option appears.
Discover the engine oil
You may now quickly hit the trip button to cycle through all of the available options. I’m going to reset the Engine Oil right now, but you may reset any other item using the same steps.
Keep holding down the TRIP button.
When you have passed the object we want to reset, press and hold the TRIP button once more, and the object will appear reset with a question mark.
To finalize the reset, let go and then hold it once more.
Release the TRIP button after that, and then press and hold it once more to confirm, to start the countdown. When that countdown is over, the service is reset, and you can use it again.
So, yes, guys, that’s all. Resetting the maintenance lights on your BMW 3 series is a rather easy quick tip. And once more, this was on a 2012 BMW F30 335i, but I believe this would function on any current new generation BMWs, namely F30 and newer, since they will typically utilize the same on-board software, such as IDrive and gauge cluster software.
Reset BMW 328i Oil
Resetting the oil change light on your 2016 BMW 328i is crucial once you have finished changing your oil. In order for your car to monitor when you need your next oil change, this must be reset. So, follow these instructions to reset your oil change light.
You must stop the car by pressing the stop button; do not start the engine. Long-pressing the reset button comes next. Await the appearance of the service indicator light. The next step is to repeatedly hit the reset button while navigating the service menu.
Long-press the reset button while the oil change interval is highlighted. If the reset prompt appears, you can press and hold the reset button while releasing it. Your reset is finished if the new distance appears and there was a “Ok.”
How is the oil light reset?
Turn the Key while Holding the Reset Button. Holding down the reset button, turn the ignition back to the ON position. Keep a close eye on the maintenance or oil change light. It ought to begin to flicker. Release the reset button after a brief period of the light blinking ON and OFF, and then turn the ignition OFF.
How can my BMW 3 Series be reset?
The mechanic will reset the computer in your BMW after the service is complete so it can record your mileage and let you know when the car will need maintenance again in the future. However, the techniques listed below can help you if you maintain your own car but are unclear of how to reset the computer system.
- With the engine off, turn the key to the ON position.
- For TEN seconds, press and HOLD the ODOMETER button. It can be found at the Instrument Cluster’s extreme bottom LEFT corner.
- The dash screen will display FGSTNR along with a number. Your chassis number is this.
- The LAST FOUR numerals are added. Ex: 3+4+5+6= 18 (taken from the image above). Your UNLOCK CODE is going to be 18.
- Press and hold the ODOMETER button one more until the FGSTNR clearing area appears.
- Press the odometer button until the upper Menu area (entering code menu) reaches 19 after the bottom area has cleared; When you do, the text will appear at the bottom: Press the odometer button to enter your unlock code after turning the lock on. This is seen in the bottom portion.
- The screen will appear as in the image above after a little period, at which point the menu will once again appear at the top. To access the number 21 menu, press the odometer button.
- On the screen’s bottom, it will say: RESET? To complete the reset, press the odometer button.
Your BMW’s computer has been restarted! The existing settings must now be added again, or new ones must be added.
**NOTE: Slowly repeat the procedures if you are unable to reset the BMW computer on your first attempt. If you’re still having trouble, ask the dealership for help or refer to your car’s owner’s manual.
Will a BMW check engine light automatically reset?
Since the Condition-Based Servicing system is used by the majority of BMW models, your check engine light ought to automatically turn off after the problematic issue has been fixed.
How can the service light be turned off on a BMW?
- Start the electrical systems of the car, but do not start the engine.
- Till the service notice shows, press and hold the tiny odometer button in the instrument panel’s lower left corner.
- When the message says “Reset,” let go of the button and press and hold it once more.
Why is the oil light on even after I changed the oil?
If your oil light continues to illuminate even after changing the oil in your engine, you should examine the sensor to rule out a faulty sensor as the root of the problem. The oil pump might become clogged with dirt and other debris, leading the sensor to mistakenly report oil problems. Although changing the sensor is pretty straightforward, you should take your car to a qualified mechanic if you don’t feel confident doing it yourself. Low oil pressure is the following typical reason. Your oil light will turn on if the oil pressure drops below 5 pounds per square inch. You should check the oil level even though this shouldn’t happen after an oil change because you never know.
Even after an oil change, the final common cause of a lit oil light is perhaps the most troublesome. Numerous engine problems might result from the oil pump not circulating enough oil to maintain the engine’s parts lubricated and operating as intended. Parts do wear down over time, even though getting oil changes at regular intervals should prevent this issue from happening.
Bring it in to see us at Craig Dunn Motor City if your oil light is still on after an oil change, or make an appointment for service right away online! Similarly, we can change the oil on your car if it needs it. Do you have any more inquiries? Please feel free to contact our staff right away!
On a BMW, how do you reset the red exclamation mark?
Start the engine, then move through the obc until you find the word RESET next to the “flat tyre” sign. To choose, press the stalk’s tip. A tick should display after about 5 seconds of pressing and holding; just drive away, and it will reset itself. Don’t wait for any confirmation because there are no other signs that it has done it.
All owners and aficionados of BMW’s 1 and 2 series have their own forum community. Join the conversation regarding performance, customizations, classifieds, troubleshooting, maintenance, and more!
How can the BMW service due message be reset?
Find the tiny odometer button in the instrument panel’s lower left corner. until the service message shows, press and hold. When the message says “Reset,” let go of the button and press and hold it once more.
After an oil change, why is my maintenance light on?
Second, restarting the counter after changing the oil involves resetting the maintenance required light. As a consequence, you can travel securely on roads and this light will notify you when it’s time for a fresh oil change after 5,000 miles without having to manually tally the miles.
What does “service due” mean on my BMW?
Service Vehicle: Your BMW needs service if this light is red. When it’s yellow, your BMW needs maintenance soon. It’s best to book a servicing appointment as soon as you can in either situation.
What does an exclamation point in a yellow triangle on a BMW mean?
The icon denotes a problem with your engine, its emissions, or any of its components. Steering system: If your steering wheel has an exclamation point, your steering system is malfunctioning. Additionally, it can imply that power steering is not available. The image of the tire pressure monitor can display in either yellow or red.