How To Reset Ccc BMW?

Be aware that even in the absence of a hardware issue, a dead battery or a hard reset of the CCC unit can cause memory corruption. As a result, only attempt a hard reset if your CCC unit is already functioning strangely. Don’t take the chance of tainting a CCC unit’s working memory. The device can be rebooted by simultaneously pressing and holding the Volume, DVD, and CD eject buttons for a few seconds.


I haven’t seen this posted here, but I’ve occasionally found it to be helpful. Hold down the DVD and CD drive eject buttons while turning the radio power knob to completely restart your car control computer (I-Drive, Navigation, and Audio). In spite of the system rebooting from scratch, none of your presets or stored data are lost. The system does not entirely reboot when you turn the car off and back on again, at least not to this extent.

This approach has come in helpful for me on a few occasions, such as when dealing with a problematic CCC, installing a North American navigation disk after removing a Euro disk, or whenever the system begins acting strangely. Similar to the CTRL-ALT-DEL salute for Wintel computers.

By the way, you can do this while driving. nothing required for the go-fast module is impacted. Ok, everyone who doesn’t have I-Drive can comment on how horrible it is right now.

How do you clear an error notice on a BMW?

The Idrive: Vehicle Info > Vehicle Status > menu might be worth a shot. If any issues appear, click the warning triangle and scroll down to the bottom to reset.

How can my BMW driver profile be reset?

Remove the idrive profile of the former owner if you bought a used car.

Setting 1

2. Personas

3. Choose the active profile.

4. In order to see the “options” page, move the idrive dial to the right.

5. To reset your profile, scroll down.

6. Doesn’t require much time.

7. Shut off the engine and wait 5 to 15 minutes for the idrive to totally shut off. In order for the idrive to turn off while you are waiting in the car, ensure sure your seatbelt is not fastened.

8. Restart the vehicle, return to “Profiles,” and choose a “—-“.

9. Choose “rename profile” by pushing the iDrive dial to the right once more.

10. After reconnecting, begin adding the shortcuts and any settings you desire.

Before doing this, whenever I used a different key to start the car, my shortcuts and other settings would erratically reset themselves after some time.

Every configuration now appears to save properly after resetting and creating a new profile.

Why does a BMW have CCC?

A head unit model installed on BMW vehicles made between 2003 and 2010 is called the BMW CCC unit. The BMW CCC unit and the 8.8″ wide-screen display for this Professional Navigation are both housed in the dash board. The BMW CCC unit is susceptible to a number of issues, many of which are easily fixable.

You’ll learn the following from this article:

  • what your mechanic or dealer means when they mention the CCC iDrive
  • What distinguishes a BMW CCC unit from a BMW CIC unit or an M-ASK unit?

You’ll probably need to know whether your BMW has a CCC unit, a CIC unit, or another type of iDrive navigation computer during the following times:

  • Working your way up from the iDrive model is necessary when you are facing infotainment system issues (sound issues, navigation reset, bluetooth disconnecting, etc.).
  • after you decide to update your iDrive. Your existing iDrive model will let you know which additional modules need to be upgraded.

We are aware of how perplexing the terminology used by automobile infotainment systems is. We all experience this frustration, so don’t worry. This is the reason we wrote this piece—so we can use what we know to benefit others.

Car Communication Computer is the abbreviation. iDrive is a group of hardware and software that controls the entertainment and communication systems in BMW vehicles made starting in 2001. One specific version of the BMW iDrive system is the BMW CCC unit.

How can I tell if the CCC in my BMW?

The 5 Series E60/E61 was the first production vehicle to have CCC iDrive in 2003. After that, the X5 and X6 were added to additional BMW models until 2009. Throughout its existence, CCC iDrive benefited from two updates, which were released in 2007 and 2008. Some BMWs built in 2009 have the CCC head unit in addition to the new CiC controller (placed on the center console). These vehicles were regarded as “Hybrid” CCC/CiC iDrive systems but are essentially still CCC iDrive vehicles. Display resolution for the 8.8-inch, 640×240-pixel CCC iDrive system.

CCC Between the CCC and the CiC, the iDrive Systems’ antiquated LVDS transmission protocol necessitates an 8 pin, 8 wire link. Your IMI-1000 will be set up to work with the 8-wire LVDS connectors if your system is a CCC system.

If you have any of the following, you can determine if you have CCC iDrive:

1. 2x DVD/CD DRIVES: CCC iDrive Systems use a DVD drive to store and read the satellite navigation map data. If the main head unit has two DVD slots, the iDrive system is a CCC system.

2. The CCC menu system differs from other iDrive systems in that it has a center “i” and four primary menu items that correlate to the rotary controller’s directional “left, right, up and down” movements.

3. Determine whether you have the NAV option;

The 8.8-inch TFT/LCD display.

5. Rotary Controller Type – One of the three CCC iDrive rotary controllers are what you will have.

An illustration of the CCC iDrive System, which has a rectangular metal LVDS connector, is seen below.

The BMW iDrive needs to be cleared.

How do I remove my personal settings and data from my BMW? Select “CAR menu” > Settings > General settings > “Reset vehicle data” on your BMW with Operating System 7 to reset your personal data and settings. Reset car data by choosing “Menu” > “System settings” on your BMW with Operating System 8.

How do I restart my computer after changing the battery in my BMW?

One of the vehicles with the most advanced intelligent operating system in the world is the BMV. Therefore, the first thing you must do after every hit or replacement of an object in the car is to restart the entire vehicle.

This setup enables the computer to anticipate your next replacement requirement and alert you to it. After changing the battery, resetting the BMW computer is a quick and easy process.

  • First, turn on the controller again.
  • Step 2: Press “Trip” to activate it and make it light.
  • Step 3: Hold down the “trip” button while continuing to press and hold it until the “Reset” button shows up on the screen.
  • Reset in Step 4

How can I upgrade the system in my BMW?

Download any updates that are accessible on a USB drive. Place the USB drive into a USB port on your car. Select “Settings” from the menu on your iDrive device. Follow the instructions that appear on the screen after clicking “Software Update.”

Does removing the battery reset the BMW ECU?

To reset an ECU, you don’t need to unplug your car’s battery from both terminals.

To reset an ECU, you can choose to unplug the battery from both terminals, but it’s not necessary. Simply cutting off the electricity from the car battery to the ECU will reset the ECU in your vehicle. Disconnecting the negative cable from the negative terminal is the most effective approach to interfere with the ECU’s power supply.

How do I turn on BMW iDrive?

Make sure Bluetooth is turned on in both the automobile and the mobile device before proceeding. Choose Communication > Manage mobile devices > Connect new device* on the iDrive. The Bluetooth name for your BMW is then displayed* after you have selected the necessary features for the device. Simply locate and choose the BMW Bluetooth name from the phone’s Bluetooth menu, then adhere to the directions on the phone’s display and the vehicle’s display. You will be required to verify that the distinct code displayed in the car display matches the code on the majority of cellphones. Pressing OK causes the features to work. The phone appears in the device list after being linked with the vehicle. Only pairing a phone while the car is still is permitted for your protection.

Only applies to automobiles equipped with a professional navigation system. Use the iDrive to select “Add new device” for vehicles equipped with business navigation.

How can I evaluate my BMW iDrive?

The iDrive system’s navigation is a crucial component that makes getting from A to B simple. But since roads and sites of interest constantly change, it’s critical to maintain your BMW’s GPS maps updated if you want to get the most out of your iDrive.

Many of the most recent BMW models include over-the-air (OTA) map updates, which use the vehicle’s integrated SIM card to automatically download the most recent map data. The procedure in these automobiles is comparable to updating your smartphone to the most recent iOS or Android version; all you have to do is restart your car after your iDrive has downloaded the data.

For vehicles that do not allow OTA updates, a manual upgrade is necessary. Previously, updating BMW navigation maps required changing a DVD holding the map data. More newer vehicles include built-in hard drives that hold the data, allowing you to update your map by overwriting the hard drive’s contents. You can accomplish this with BMW by connecting a USB stick with the updated map data to the USB port in your vehicle.

It’s a good idea to determine which map version you need, which relies on your iDrive system, before purchasing a new BMW map. Use the settings menu when your iDrive navigation is open to navigate to “Navigation system version,” where you can see the region, version, and year of your current GPS data.

What does CCC mean in a car?

The Car Connectivity Consortium(r) (CCC) Digital Key is a standardized ecosystem that allows mobile devices to store, authenticate, and exchange Digital Keys for vehicles in a safe, private manner that operates anywhere, even when the smartphone’s battery is running low.

Do you have a CCC iDrive update?

Since 2009, CIC has had its maps saved on a hard drive instead of the DVDs that the CCC iDrive used to store map data and that you had to swap out for an upgrade. This indicates that CIC maps can be updated by manually saving the map update on the iDrive after downloading it.

Fortunately, if manual map updating is necessary for your BMW, the process is fairly easy and doesn’t involve any software coding. All you have to do is insert the USB stick containing the map data into the glove box’s USB port. The system will instantly detect the new map data, but the installation won’t begin until you enter a BMW-issued FSC activation code using your iDrive controller.

You may order a map update for your CIC head unit from BimmerTech if you’re interested. These require the Premium navigation version and are available for North America, Europe, Australia/New Zealand, and other regions. Every six months, we advise upgrading your maps periodically.

Can you update the software for BMW?

By utilizing the Remote Software Upgrade capability, BMW drivers from all over the world may easily upgrade their BMW Operating System over-the-air today. In April 2020, the most recent BMW software was made accessible to more than 500,000 BMW owners.