First, while the engine is running, push the odometer trip meter once to reset it to zero.
Then turn the ignition off once more. This step, in my opinion, was essential in order for me to access the Service menu.
You are now prepared to do the following BMW E60 reset brake pad light instructions.
- Turn on the ignition. so that the parking brake, oil, and battery lights are visible. The car won’t start even though the key is set to start the engine.
- When a yellow triangle with an exclamation point appears in the top pane between the clocks, press the odometer reset button for 5 to 10 seconds. This is the icon for the service, which typically replaces the outside temperature, time, or date.
- When you temporarily release the odometer button and then immediately press it again, a picture of the brake fluid symbol appears. identical to the one displayed by the I Drive when you access the Service menu. The next service that you want to reset will show up if you simply release the button and push it once again.
- If you wish to clear the BMW E60 brake pad light indicator. Once the phrase “RESET” appears at the bottom of the lower window, continue holding the odometer button.
- Push and hold the odometer button until the word “reset?” appears at the bottom of the lower window.
This is the entire process for resetting the brake pad light on a BMW E60. After an oil change, you can choose to reset any maintenance oil lights. Or, when maintenance is required for BMW cars, reset the check engine light, airbag light, inspection key, or insp faults. or any problem that pops up on the screen. Enter the name of the car you are looking for information about in the search box to learn how to reset other service reminders on your own.
You can find solutions to your automotive troubles on this informational website. If our processes are correct, please leave a remark. If you would want to add anything, please do so. We value all viewpoints.
In This Article...
How to Reset a Service Light
According to Bentley Publishers
Brake pad (lining) indication reset:
1. Set the ignition’s terminal 15 position. Ignition on with the engine off is terminal 15. (Press the start button to make the instrument panel’s warning lights illuminate.)
2. Lock all entrances.
3. Hold down the Instrument Cluster Set/Reset button for three seconds.
4. The Instrument Cluster’s top display will be
5. Release the trip reset button when the brake linning indicator displays in the message center.
It clearly states that the sensor needs to be replaced if it was even slightly skinned, as mine was. Great… The bloody pad sensors are the last thing I want. lol Anyway, I hope this helps everyone who is having the same issue.
On my 2006 530I, I recently replaced the front rotors, pads, and sensor. I performed the following reset instructions successfully, but after resetting, I learned that the next pad replacement will only last for 25000 miles.
Does that make sense? I anticipated there would be more. I forget the exact figure, but the rear brakes were serviced by the dealer around five months ago, and they were reset for well over 25k. The Idrive indicates that the rear brakes will need to be changed again in 29k.
Nice, simple explanation that worked perfectly; I no longer need to take it to the repair to have the other bothersome lights reset. Sweet, and many thanks
How can I reset the BMW’s brake pad lights?
Check Out These Steps to Reset Your Brake Warning Light the ignition with the key (or key fob). While turning the key to position 2, avoid turning on the ignition. Open the driver’s door and hold it open for around ten seconds. The brake pad lights ought to reset once you’ve finished the aforementioned three steps.
After replacing my brake pads, why is my brake light still on?
Your parking brake is engaged if that light is on. When the parking brake is released yet the light remains on, low brake fluid is the cause. If the fluid is full and the light is still on, there can be an issue with the booster or hydraulic system.
What does the BMW’s yellow brake light signify?
I continually receiving a triangle on my dash with an exclamation point and a yellow brake light. It randomly starts up and then shuts off. They topped out the brake fluid after I took it to the dealership to have it checked. but it’s now turning back on. Anyone with knowledge of the issue? thanks.
So, since the dealer filled it off, have you checked the brake fluid level again? You may have a brake system leak if your braking system required enough fluid to trigger the low brake fluid light. How does the pedal feel? When you apply consistent pressure, does it sag at all? When you overnight park, are there any moist areas close to the inside of the wheels?
I didn’t check the amount of the brake fluid. How can I go about doing that? Normally, the pedal feels. Lighting turns on and off. I therefore assume it is the sensor.
There is a sizable black plastic cover on the driver’s side beneath the hood, just where the gas strut—which keeps the hood up—attaches to the body. Both a front and a back clip are present. The brake fluid reservoir can be seen there if you lift it off.
Although I too prefer my eyeballs to any fluid level sensors (crankcase sump?! ), a YELLOW brake indication, according to the table in the non-iDrive handbook, indicates that the brakes are engaged “Drive-off assistant is not working. After the brake is disengaged, the car won’t be kept in position.” A red sign would be low fluid.
How can the service light be turned off on a BMW?
Find the tiny odometer button in the instrument panel’s lower left corner. until the service message shows, press and hold. When the message says “Reset,” let go of the button and press and hold it once more.
I have a brake pad warning light on. Can I drive?
Driving is safe when this light is on for a brief period of time. As was already indicated, when you still have some brake pad material remaining, the light will turn on. However, if you wait too long and keep driving, you will run out of material and harm the rotors. Waiting too long is hazardous and raises the likelihood of being involved in an accident because the brakes won’t stop the car as quickly without any pad material.
As always, if you have any problems with your brakes or wear indicators, our qualified specialists are here to help.
How can I turn off the dashboard brake light?
RISK: Despite changing the brake pads and associated wear sensors, the dashboard braking system warning light continues to flicker. Steps to take:
- To check that the brake pads and discs are in contact, repeatedly press the brake pedal.
- Turn off the dashboard for a brief period of time.
- Check to check if the light is still on after turning on the dashboard once again. Ask for help and guidance if the brake warning light is still on.
Only for entertainment and informational reasons, the information in this article should not be used as a substitute for consulting a qualified technician or mechanic for expert guidance. We advise you to speak with a licensed technician or mechanic if you have any specific queries or issues regarding any of the subjects discussed here. We will not, under any circumstances, be held responsible for any loss or harm resulting from your reliance on any content.
BMW brake sensor replacement necessary?
The “brake” light on your dashboard or iDrive system is controlled by your BMW brake pad sensor, which also informs you of the remaining life of your brake pads. The sensor is mounted to the brake pad; as soon as the brake pads are completely worn down, the sensor’s tip breaks, tripping the wire and turning on the dashboard light. The brake pad sensor error codes are as follows when using an OBD scanner:
5, 5, 6, 5, 14, 5, 15, and 6F12
Every time you change your brake pads, you should also replace the brake pad sensor. The sensor does not need to be changed every time, but failing to do so could lead to erroneous readings of the amount of life left in your pads and a persistent notification on your dash/iDrive system. The only way to get rid of the light once it appears on the dash is to either swap out the sensor or bypass it, which will stop it from reading the pad life.
Where is the switch for the brake lights?
A little gadget connected to the brake pedal mechanism is called a brake light switch. The brake light switch, despite its diminutive size, has a significant function in contemporary automobiles.
If a brake light switch is malfunctioning, many vehicle functions, such as Push-Button Start, Antilock Brakes, and Vehicle Stability Control, will not function.
There are two main purposes for the brake light switch. When a driver depresses the brake pedal, it first activates the brake lights. Second, it informs the car’s computer that the brakes are being used. Driving a car with a broken brake light switch is VERY RISKY.
The brake light switch is typically located just over the brake pedal. It has a one-way or two-way electric switch within. Brake lights that don’t turn on or that stay on all the time are the most typical signs of a broken brake light switch.
Will turning off the battery turn off the ABS light?
Will the ABS light be reset if the battery is disconnected? Yes, the ABS light will reset if the car battery is disconnected for a long enough period of time.
Why does my dashboard’s brake light remain on?
Don’t risk operating the vehicle if you’ve just started it and you see the brake system warning light on.
To begin with, confirm that the parking brake is fully disengaged. Some automobiles have a combined parking brake and braking system warning light. Make sure your parking brake is fully disengaged by checking it and pulling on the release lever. If the dashboard light is still on, your vehicle’s brake system may be malfunctioning and making it difficult for you to stop. Shut off the engine and make plans to have the car delivered to a reliable repair.
What two factors could turn on your brake system warning light?
Make sure your parking brake is fully disengaged if you haven’t started driving yet.
If the parking brake is released but the brake light remains on, you should check the brake fluid level and, if necessary, top it off. Your brakes could need to be bled of air, therefore it’s better to have your mechanic take care of it.
How much are brakes from BMW?
The cost of new brakes depends on your BMW model. Depending on the brake pad material, replacement brake pads can range in price from $150 to $300 per axle on average. Your brakes’ other components, including the rotors, may have been impacted by any prior damage to the brake pads.
What does “service due” mean on my BMW?
Service Vehicle: Your BMW needs service if this light is red. When it’s yellow, your BMW needs maintenance soon. It’s best to book a servicing appointment as soon as you can in either situation.