The Trip Odometer Reset button, which is visible on the instrument cluster, is used in the approach that follows. It doesn’t need a scanner or other specialized equipment.
- Start the engine. Your key should be placed in the ignition. Turn the key two clicks on earlier BMW models. Press and hold the START button on more recent models without depressing the brake pedal. The dash lights will all turn on. You shouldn’t start the car.
- Wait a short while for any warnings to disappear.
- On the instrument cluster, depress and hold the Odometer Reset button.
- A tiny triangle will appear on the dash while you are holding down the ODOmeter Reset button. Hold the Reset button down until you see the Microfilter or Oil symbols.
- You are now in the service menu. Any BMW CBS Service Reminder can be reset here. Press the Reset button until the brake reservoir symbol appears because we want to reset the BMW brake fluid alert. The +/- buttons on the instrument cluster and the Check button on the steering column stalk can also be used to switch between items.
- The Odo Reset button should then be pressed and held for around 5 seconds. The word “Reset?” will appear on the screen.
- Press and hold the button once more after releasing it. The reset will be finished in five more seconds. The signal ought to switch from Red to Yellow. Reset? should be changed to Reset or OK.
We strongly advise consulting the owner’s manual for instructions if you are unable to successfully reset the BMW brake service light using the techniques above.
Owners of the 1, 3, 5, 6, 7, X1, X3, and X5 series will benefit from the above instructions.
In This Article...
Why is my BMW 328i’s brake light on?
The brake warning light is a major matter. When you see it turn on, ensure sure your emergency brake is not engaged, then halt your vehicle as soon as you can. Your brakes could not operate at all if you have insufficient brake fluid.
How is the BMW brake warning reset?
My car’s brakes were recently changed by my uncle, but the warning light is still on. Does a BMW X3 have a mechanism to reset the brake light?
In less than two minutes, find out if your auto insurance is being overcharged.
Every time the brakes and brake wear sensors are replaced on a BMW X3, the brake light warning must be reset. Fortunately, the brake light reset is simple and should only take a few minutes.
Resetting the brake light on a BMW X3 is made simple by:
- Do not start the engine after turning the ignition to the on position.
- Wait 30 seconds before opening the driver’s side door.
- Wait another 30 seconds after switching the ignition to the off position.
- start the vehicle
If the aforementioned fails, you should:
- Don’t start the engine after turning the ignition on.
- Up until the service menu appears, keep holding down the trip reset or odometer button. The service menu should show after holding the button pressed on the left side of the speedometer for approximately ten seconds.
- To find the brake warnings, use the reset button or, depending on the model, the controls on the turn signal lever to navigate through the settings.
- When prompted to reset the warning, press and hold the reset or BC button on the end of the turn signal lever.
- When prompted, press the reset or BC button once the screen indicates that it is resetting.
Finding auto insurance shouldn’t be a headache, but dealing with unnecessary warning lights can be.
Jerry is a helpful software that compares quotes from more than 50 leading insurance companies in a couple of seconds. When you locate an insurance you prefer, Jerry can assist with the transition and paperwork. It’s that simple!
Why does the brake fluid indicator keep flashing?
Your car checks the bulbs when you turn it on. On the dashboard of your car, each bulb is lit up. It is turned on as each bulb passes its test. Any light that is illuminated, including the brake warning light, indicates a potential issue that has to be addressed.
The brake warning light is most likely caused by a slight drop in brake fluid level. When it is safe to do so, you should stop, find the brake fluid reservoir using your owner’s manual, and fill it with the appropriate brake fluid. As a result, the brake warning light ought to turn off.
If the brake system warning light is still illuminated, a brake fluid leak can be the cause. Press down hard on the brake pedal when your car is parked in a secure location. The pedal may be leaking if you notice that it slowly descends to the floor. Search for any areas of yellowish liquid under your automobile. If you spot any, you probably have a leak.
Your brake pads may need to be replaced if the brake warning light is still on after you’ve checked for leakage. Your brake pads may have worn out severely if you have this light on. Some automobiles do have a distinct brake pad wear warning light that resembles this.
What does BMW mean by brake fluid service?
Drivers are always able to achieve their brakes’ maximum performance thanks to the BMW brake fluid cleanse service. Your brake system’s lifespan will be extended by a brake fluid cleaning! Contact BMW of Bloomfield or book an appointment online for additional details on our service schedule.
How can my BMW 3 Series be reset?
The mechanic will reset the computer in your BMW after the service is complete so it can record your mileage and let you know when the car will need maintenance again in the future. However, the techniques listed below can help you if you maintain your own car but are unclear of how to reset the computer system.
- With the engine off, turn the key to the ON position.
- For TEN seconds, press and HOLD the ODOMETER button. It can be found at the Instrument Cluster’s extreme bottom LEFT corner.
- The dash screen will display FGSTNR along with a number. Your chassis number is this (See image example).
- The LAST FOUR numerals are added. Ex: 3+4+5+6= 18 (taken from the image above). Your UNLOCK CODE is going to be 18.
- Press and hold the ODOMETER button one more until the FGSTNR clearing area appears (you will still see numbers in the top section).
- Press the odometer button until the upper Menu area (entering code menu) reaches 19 after the bottom area has cleared; When you do, the text will appear at the bottom: Press the odometer button to enter your unlock code after turning the lock on (from the example above) This is seen in the bottom portion.
- The screen will appear as in the image above after a little period, at which point the menu will once again appear at the top. To access the number 21 menu, press the odometer button (also theentering code menu).
- On the screen’s bottom, it will say: RESET? To complete the reset, press the odometer button.
Your BMW’s computer has been restarted! The existing settings must now be added again, or new ones must be added.
**NOTE: Slowly repeat the procedures if you are unable to reset the BMW computer on your first attempt. If you’re still having trouble, ask the dealership for help or refer to your car’s owner’s manual.
When should the brake fluid in a BMW be replaced?
Most manufacturers recommend changing your brake fluid every two years, but there are other indications that your brakes require maintenance.
When the brake fluid light is on, can you drive?
Your car’s brakes enable you to stop safely, especially in an emergency. You should pay attention and get in touch with your repair right away if your brake warning light illuminates. Since your car’s brakes are the most crucial safety element, you shouldn’t drive if they aren’t functioning properly.
When you notice that your brake warning light is on, keep an eye out for the following:
The need to replace a brake is one of the primary causes for the Brake Warning Light to illuminate. The light only indicates that one of the brakes is failing; it does not specify which brake it is. Your brakes can be examined by a mechanic who will also be able to identify which one needs to be replaced.
Other causes for your brake warning light to illuminate include low brake fluid or damaged brake pads. Your brake fluid may occasionally need to be replenished or additional fluid may need to be added if the level is low. In other circumstances, a qualified mechanic can totally replace the brake pads for you.
Another potential cause for the Brake Warning Light to illuminate is leaking brakes. The car won’t be able to stop if the brakes are leaking. Your car should not be operated in this hazardous situation. Contact a professional right away to get your automobile evaluated if you believe there is a leak and your brake warning light is on.
It’s crucial to notify your mechanic if you experience strange noises when applying the brakes and your brake warning light is on. Grinding noises are particularly dangerous since they indicate that your brake pads need to be replaced right away because they are worn out.
The warning light and the car pulling to one side while you apply the brakes are other indicators that your brakes need to be replaced. This may indicate a brake fluid leak or the necessity for brake replacement.
It is unsafe to drive while the brake warning light is illuminated. It implies that your brakes aren’t functioning properly and should be fixed right now. YourMechanic or any qualified mechanic should inspect your braking system as soon as you observe the Brake Warning Light illuminated.
What does the BMW’s yellow brake light signify?
I continually receiving a triangle on my dash with an exclamation point and a yellow brake light. It randomly starts up and then shuts off. They topped out the brake fluid after I took it to the dealership to have it checked. but it’s now turning back on. Anyone with knowledge of the issue? thanks.
So, since the dealer filled it off, have you checked the brake fluid level again? You may have a brake system leak if your braking system required enough fluid to trigger the low brake fluid light. How does the pedal feel? When you apply consistent pressure, does it sag at all? When you overnight park, are there any moist areas close to the inside of the wheels?
I didn’t check the amount of the brake fluid. How can I go about doing that? Normally, the pedal feels. Lighting turns on and off. I therefore assume it is the sensor.
There is a sizable black plastic cover on the driver’s side beneath the hood, just where the gas strut—which keeps the hood up—attaches to the body. Both a front and a back clip are present. The brake fluid reservoir can be seen there if you lift it off.
Although I too prefer my eyeballs to any fluid level sensors (crankcase sump?! ), a YELLOW brake indication, according to the table in the non-iDrive handbook, indicates that the brakes are engaged “Drive-off assistant is not working. After the brake is disengaged, the car won’t be kept in position.” A red sign would be low fluid.
How can the service light be turned off on a BMW?
- Start the electrical systems of the car, but do not start the engine.
- Till the service notice shows, press and hold the tiny odometer button in the instrument panel’s lower left corner.
- When the message says “Reset,” let go of the button and press and hold it once more.