How To Reset BMW X3 Oil Light?

BMW / By

Three minutes are required.

Entering the maintenance section now, we’ll reset it to the new interval is what we’re going to do. I’ll do that now, please.

Enter diagnostic mode.

First, since we don’t want the engine to start, we won’t place our foot on the brake. Instead, we’ll just move over to the START button and push it three times in a row to enter the Diagnostic mode.

Hold on a second

Then you’ll see a few messages, the last of which will say, “Diagnostic mode active,” and these messages will eventually disappear on their own.

Keep holding down the RESET button.

Next, move over to the dash where there is a button on the left. Press that button and keep holding it until you see the phrase “Engine Oil reset possible.”

Ensure that you are viewing the ENGINE OIL screen.

Ensure that the engine oil screen is active.

  • Hold the RESET button down.
  • Release the button after which you press it once more.

Release the button to reset it, and then press and hold the button once more to complete the reset.

For your information, this operation is for the BMW X3 G01’s third generation (2018, 2019, 2020, 2021, 2022 model years).

So, it is how you can cancel the service you just used. Even though the procedure is simple, I’ll explain it here in case you have any trouble. We’ll see you at the next one, I hope this was useful.

How can you turn a BMW’s oil light back on?

My uncle, a retired technician, recently changed the oil in my BMW. The maintenance light is still on, so I suppose he forgot to turn it off. How can I turn off the BMW’s oil-change light?

In less than two minutes, find out if your auto insurance is being overcharged.

  • Don’t start the engine after turning the ignition on. You should hit the start button instead of depressing the brake pedal if your car has a push-to-start system.
  • The service menu will show if you continue to depress the trip reset or odometer button on the instrument cluster. The reset button is normally located to the left of the speedometer, and pressing it for around 10 seconds should bring up the service menu.
  • To discover the oil change notice, use the reset button to scroll through the settings. Press the reset button after that.
  • Depending on the model, you might have to scroll through the options using the controls on the turn signal lever until you come across a prompt asking you if you’d like to reset the warning. Then, to reset the turn signal, press the BC button at the lever’s end.
  • When prompted, press and hold the reset or BC button until the display indicates that the device is resetting.

You can save money on automobile expenses by having friends or relatives work on your vehicle, but employing Jerry can help you save money on extra expenses like auto insurance. The typical user of Jerry saves $887 annually on auto insurance.

Don’t be afraid to alter insurance or payment plans because you’re concerned about the extra labor. Jerry takes care of all the paperwork and even assists with canceling your previous insurance! Additionally, you can text one of our agents using the app if you have any questions along the route. They’ll be there for you whenever you need them.

How can the maintenance light on a 2016 BMW X3 be reset?

2. To make the service indicator light appear, press and hold the Set/Reset button for 10 seconds. Scroll the service menu by repeatedly pressing the Set/Reset button.

3. If the service item is past due, the message “Reset executable” will appear. By holding down the Set/Reset button for 3 seconds, the reset will begin.

4. You’ll see the message “Execute reset?” Press the Set/Reset button one more for three seconds to confirm the reset. ‘Reset running’ will be indicated on a progress bar.

5. The message “Reset successful” is displayed to validate the reset.

6. Switch off the ignition. To make sure the indicator has been reset, start the engine.

My 2013 BMW X3 needs to be reset.

1. Press the START/STOP button or turn the key to Terminal 15 on the ignition switch.

2. For 10 seconds, press and hold the Instrument Cluster Set/Reset button.

3. A service item will be illuminated on the upper display in the instrument cluster. The amount of time or mileage left for that Service Item is displayed on the lower display in the Instrument Cluster. The display can scroll through all of the Condition Based Service Items by continually pressing the button.

4. When you press and hold the Instrument Cluster Set/Reset button a second time, “OK” or “DUE” will appear on the lower display panel.

5. The lower pane for that service will show “RESET” if you press the Instrument Cluster Set/Reset button once again. Only the service shown in the top window will be reset by releasing and reapplying the button one more time.

6. To make sure the indicator has been reset, turn off the ignition and start the engine.

How can my BMW 3 Series be reset?

The mechanic will reset the computer in your BMW after the service is complete so it can record your mileage and let you know when the car will need maintenance again in the future. However, the techniques listed below can help you if you maintain your own car but are unclear of how to reset the computer system.

  • With the engine off, turn the key to the ON position.
  • For TEN seconds, press and HOLD the ODOMETER button. It can be found at the Instrument Cluster’s extreme bottom LEFT corner.
  • The dash screen will display FGSTNR along with a number. Your chassis number is this (See image example).
  • The LAST FOUR numerals are added. Ex: 3+4+5+6= 18 (taken from the image above). Your UNLOCK CODE is going to be 18.
  • Press and hold the ODOMETER button one more until the FGSTNR clearing area appears (you will still see numbers in the top section).
  • Press the odometer button until the upper Menu area (entering code menu) reaches 19 after the bottom area has cleared; When you do, the text will appear at the bottom: Press the odometer button to enter your unlock code after turning the lock on (from the example above) This is seen in the bottom portion.
  • The screen will appear as in the image above after a little period, at which point the menu will once again appear at the top. To access the number 21 menu, press the odometer button (also theentering code menu).
  • On the screen’s bottom, it will say: RESET? To complete the reset, press the odometer button.

Your BMW’s computer has been restarted! The existing settings must now be added again, or new ones must be added.

**NOTE: Slowly repeat the procedures if you are unable to reset the BMW computer on your first attempt. If you’re still having trouble, ask the dealership for help or refer to your car’s owner’s manual.

How can my oil sensor be reset?

Clean the oil filler cap if you can. Use the BC button to cycle through the selections on the gauge cluster until the oil level reading appears. After that, hold the BC button down until the clock appears, indicating that the gauge cluster is resetting. only possible when the car is idle and at operational temperature

On a BMW, how do you reset the red exclamation mark?

Start the engine, then move through the obc until you find the word RESET next to the “flat tyre” sign. To choose, press the stalk’s tip. A tick should display after about 5 seconds of pressing and holding; just drive away, and it will reset itself. Don’t wait for any confirmation because there are no other signs that it has done it.

All owners and aficionados of BMW’s 1 and 2 series have their own forum community. Join the conversation regarding performance, customizations, classifieds, troubleshooting, maintenance, and more!

What does the BMW X3’s service engine soon light mean?

  • Needs Oil Changes: When it is time for an oil change, your BMW service engine light will on. The goal is to inform you when the time and mileage limits for your current oil have been reached. If you keep using your engine without changing the oil, even the best repair shop won’t be able to fix it.
  • Low Oil or Other Fluid Levels: The service engine light also warns of low transmission fluid, coolant, or oil levels. Due to these low levels, this safety feature works to protect your car’s components.
  • Regular Scheduled Maintenance: The computer in your BMW is preprogrammed with the timings for your regularly scheduled maintenance. The service engine soon light signals that your car needs to be taken in for its scheduled maintenance.

Your BMW will live longer and retain its value if you have routine maintenance done on it. You will eventually harm your car’s engine and other parts if you neglect any regular maintenance.

With the right preventive maintenance, a well-built car like a BMW can last for hundreds of thousands of kilometres. If your service engine light turns on, consider it a chance to save money and ensure you have a dependable car to drive for many years.

What does “service due” mean on my BMW?

Service Vehicle: Your BMW needs service if this light is red. When it’s yellow, your BMW needs maintenance soon. It’s best to book a servicing appointment as soon as you can in either situation.