Find the tiny odometer button in the instrument panel’s lower left corner. until the service message shows, press and hold. When the message asks “Reset?” release the button, then press and hold it once again.
In This Article...
Procedure
- Place key in ignition. Start the engine without applying the brakes. Never start the car.
- Wait a short while for all notifications, including the one reminding you to get your oil changed, to go away.
- Press and hold the odometer (ODO) reset button as soon as the service light turns off. The oil or brake symbol will appear on the middle of the dashboard after five seconds.
- RESET or scroll to throw the service items using the buttons on the stalk to the left of the steering column (CHECK / BC). When you see the oil symbol, halt.
- Press and hold the ODO reset button for an additional 5 seconds after the oil sign appears on the dashboard.
- A RESET message will appear on the dashboard.
- Press and hold the ODO RESET button once more after letting go.
Once the reset has been successful, the oil symbol and service vehicle symbol will switch from RED to ORANGE.
On a 2016 BMW X1, how do you reset the oil light?
2. To make the service indicator light appear, press and hold the Set/Reset button for 10 seconds. Scroll the service menu by repeatedly pressing the Set/Reset button.
3. “Reset possible” will be shown if a reset is possible. To begin the reset, hold down the Set/Reset button for three seconds.
4. Press the Set/Reset button for three seconds to confirm “Reset?” ‘Reset in progress’ will be indicated on a progress bar.
5. The message “Reset successful” is displayed to validate the reset.
6. Switch off the ignition. To make sure the indicator has been reset, start the engine.
How can my BMW 3 Series be reset?
The mechanic will reset the computer in your BMW after the service is complete so it can record your mileage and let you know when the car will need maintenance again in the future. However, the techniques listed below can help you if you maintain your own car but are unclear of how to reset the computer system.
- With the engine off, turn the key to the ON position.
- For TEN seconds, press and HOLD the ODOMETER button. It can be found at the Instrument Cluster’s extreme bottom LEFT corner.
- The dash screen will display FGSTNR along with a number. Your chassis number is this (See image example).
- The LAST FOUR numerals are added. Ex: 3+4+5+6= 18 (taken from the image above). Your UNLOCK CODE is going to be 18.
- Press and hold the ODOMETER button one more until the FGSTNR clearing area appears (you will still see numbers in the top section).
- Press the odometer button until the upper Menu area (entering code menu) reaches 19 after the bottom area has cleared; When you do, the text will appear at the bottom: Press the odometer button to enter your unlock code after turning the lock on (from the example above) This is seen in the bottom portion.
- The screen will appear as in the image above after a little period, at which point the menu will once again appear at the top. To access the number 21 menu, press the odometer button (also theentering code menu).
- On the screen’s bottom, it will say: RESET? To complete the reset, press the odometer button.
Your BMW’s computer has been restarted! The existing settings must now be added again, or new ones must be added.
**NOTE: Slowly repeat the procedures if you are unable to reset the BMW computer on your first attempt. If you’re still having trouble, ask the dealership for help or refer to your car’s owner’s manual.
How do I cancel the service that my BMW needs?
Find the tiny odometer button in the instrument panel’s lower left corner. until the service message shows, press and hold. When the message says “Reset,” let go of the button and press and hold it once more.
What does “service due” mean on my BMW?
Service Vehicle: Your BMW needs service if this light is red. When it’s yellow, your BMW needs maintenance soon. It’s best to book a servicing appointment as soon as you can in either situation.