Select “CAR menu” > Settings > General settings > “Reset vehicle data” on your BMW with Operating System 7 to reset your personal data and settings. To reset the car data on your BMW with Operating System 8, choose “Menu” > “System settings.”
In This Article...
This week, my BMW returns to the leasing firm, and I want the Idrive to be reset to factory defaults. I understand that my coding won’t vanish, but I just want to delete all of my music, destinations, and contacts.
Is there a quick, simple method to accomplish this without doing each step separately?
I’ll be driving less BMW for a few months so I can check out the new 5. So, until I can pick which BMW I want, I have an inexpensive temporary car from a buddy. This is because:
When my next PCP expires, a new model will be available, and I need a bigger vehicle than an F30.
When I received my LCI last year, I cleared mine. The most of it is removed when you deactivate your profile, but if you’re truly bothered, you’ll need to delete each of your past sat-nav locations separately.
selected erase all personal data via Settings > Profiles > Right for Options.
A 2012 650i Convertible with 23K miles was recently purchased. It is preloaded with voice recordings and radio/navigation presets from the previous owner. Just a ton of info that has been preserved. Is it feasible to remove everything from this and transmit it in its original form?
Definitely helpful Google link I bet you’ve been waiting forever to pull that sleazy trick on someone.
I am aware of how to delete radio presets, but I would like to know how to delete everything, including navigation history, store data, radio content, all drivers, and all recorded music.
There must be a technique they employ to accomplish this when a car is traded to the dealer, right? They are unable to assign a tech to delete each and every item, and searching for everything takes hours.
Go to settings from the iDrive main menu. Position the iDrive controller to the right while in the settings menu. After that, move it to the right one more time to see the option to remove all personal information. I haven’t used it, but it’s in my car.
jjrandorin
Read an interesting post about this. I want to know what happens if you disconnect the battery because I’m new to iDrive. or disable the iDrive’s control fuse?
I’m not sure, but you might not want to completely disconnect the batteries in a BMW without taking some precautions because I’ve heard that if the car loses all power, it might enter an anti-theft mode. I’m not sure because I don’t work on my autos.
Anyhow, that wasn’t the type of reset the OP was referring about (nor the one I was talking about).
When you lock the car and turn it off, iDrive completely shuts off for roughly 12 minutes. In most BMWs, you can restart the computer for the idrive system, navigation, etc. by holding down the volume button for 20 to 25 seconds constantly. The volume is only momentarily turned off when the volume button is pressed; the system is not restarted.
What is a BMW I3 iDrive reset?
Let’s begin right away! You must reset the computer to reboot your BMW I3. Although it may seem difficult or convoluted, there are only four easy steps needed to complete that. Restarting your BMW I3’s computer requires the following steps.
- the accessory position by turning the ignition key. Before you start your automobile, the lights and radio will turn on here.
- Press and hold the travel button after that. On the instrument panel, you may find it. Keep pressing the button until a red light displays.
- After that, take your finger off the trip button and push it again. Continue holding it down until reset displays.
- Press the journey button a third time to complete. This resets the computer.
That’s all there is to it; not too difficult, was it? When you start your car after completing these instructions, it should operate as usual. By clearing any bugs and restarting your I3’s computer in this manner, you can improve its performance.
The user manual for your BMW I3 also contains instructions on how to restart it. Although these papers may appear dull or stale, they can be helpful in certain circumstances and should have been handed to you when you bought or picked up the car.
They should be your first stop when you suspect a problem with your car because they contain the proper manufacturer recommendations. Do not worry if you cannot find your I3’s handbook. Versions for download are available online; just make sure they are the right make and model for your automobile.
Simply enter your make and model followed by the words “user manual pdf” to locate them. You may always access a manual because a digital version will typically be within the top few results!
In particular if your BMW I3 is still covered by warranty, you may want to think about getting in touch with the manufacturer, the dealer, or the mechanic if the reset doesn’t work. In these circumstances, they can examine the vehicle and make any necessary repairs without charging you.
Check your warranty to see what is covered and what repairs you might have to pay for before getting in touch with them, though.
How can I remove my BMW iDrive account?
Remove the idrive profile of the former owner if you bought a used car.
Setting 1
2. Personas
3. Choose the active profile (may have another name on it or look like —-)
4. In order to see the “options” page, move the idrive dial to the right.
5. To reset your profile, scroll down.
6. Doesn’t require much time.
7. Shut off the engine and wait 5 to 15 minutes for the idrive to totally shut off. In order for the idrive to turn off while you are waiting in the car, ensure sure your seatbelt is not fastened.
8. Restart the vehicle, return to “Profiles,” and choose a “—-“.
9. Choose “rename profile” by pushing the iDrive dial to the right once more.
10. After reconnecting, begin adding the shortcuts and any settings you desire.
Before doing this, whenever I used a different key to start the car, my shortcuts and other settings would erratically reset themselves after some time.
Every configuration now appears to save properly after resetting and creating a new profile.
How can I clear the BMW Service Due display?
Find the tiny odometer button in the instrument panel’s lower left corner. until the service message shows, press and hold. When the message says “Reset,” let go of the button and press and hold it once more.
What iDrive version do I have on my BMW?
The iDrive system’s navigation is a crucial component that makes getting from A to B simple. But since roads and sites of interest constantly change, it’s critical to maintain your BMW’s GPS maps updated if you want to get the most out of your iDrive.
Many of the most recent BMW models include over-the-air (OTA) map updates, which use the vehicle’s integrated SIM card to automatically download the most recent map data. The procedure in these automobiles is comparable to updating your smartphone to the most recent iOS or Android version; all you have to do is restart your car after your iDrive has downloaded the data.
For vehicles that do not allow OTA updates, a manual upgrade is necessary. Previously, updating BMW navigation maps required changing a DVD holding the map data. More newer vehicles include built-in hard drives that hold the data, allowing you to update your map by overwriting the hard drive’s contents. You can accomplish this with BMW by connecting a USB stick with the updated map data to the USB port in your vehicle.
It’s a good idea to determine which map version you need, which relies on your iDrive system, before purchasing a new BMW map. Use the settings menu when your iDrive navigation is open to navigate to “Navigation system version,” where you can see the region, version, and year of your current GPS data.
How can I reset my BMW now that the battery has been changed?
Here are the instructions so that you can see how crucial the BMW computer reset is after reading the preceding explanation.
- Once the lights and radio are turned on, first switch the ignition key of the BMW automobile to the accessory position. This must be completed prior to starting the car. Then, hold down the “Trip” button on the instrument panel for a few seconds until the red light appears.
- Once more, press and hold the “Trip” button until Reset appears.
- Press the same button a third time after that. The BMW computer will quickly reset now.
BMW automobile battery replacement and computer reset are both inexpensive procedures. The sooner you complete this, the easier it will be for you to operate your BMW vehicle. Despite all of these facts, this surgery should not be taken lightly. There are auto repair shops with qualified experts who adhere to the manufacturer’s warranty guidelines. To receive a safe and secure service, consult these businesses.
I need to reset iDrive for a new owner.
A 2012 650i Convertible with 23K miles was recently purchased. It is preloaded with voice recordings and radio/navigation presets from the previous owner. Just a ton of info that has been preserved. Is it feasible to remove everything from this and transmit it in its original form?
How can I restart the backup engine on my IDrive?
The IDrive Backup Engine: How Do I Restart It? By navigating to the services tab, locating the IDrive service, and then right-clicking and choosing “restart” in the Windows task manager, you can restart the IDrive backup engine.
How can I update my profile on the BMW app?
These days, technology is developing at a tremendous rate, which is reflected in every part of our life. Large mobile phones were the beginning, and now we carry around tiny, highly capable devices in our pockets. After that, everything was compared to their rapid improvements, and consumers grew increasingly interested in new technology for their mobile gadgets. As a result, the automobile sector had to adjust, and BMW was no exception.
Because of this, the iDrive of today resembles a phone screen more than ever. You really have a plethora of connectivity options, tile options, and widget possibilities. When it came to shared vehicles in the past, memory seats were the newest craze that impressed people. When you switched places with your husband or wife, you didn’t have to manually adjust your seat; all you had to do was touch a button, and the automobile did it for you. Things advanced when there was a choice to automatically adjust the steering wheel as well.
BMW vehicles are now equipped with personal accounts. In essence, the iDrive system may be set up to your preferences, and when a certain user signs into their BMW ID, everything is already customized to their specifications. Everything is recalled, including the seat, steering wheel, mirrors, and even ambient lighting. You can even add your own photo to these BMW IDs to ensure that you never confuse one for the other.
To achieve this, open the “Profile” section of the My BMW App and click the profile image to edit it. Take a photo or select one from your smartphone. After choosing the image you want to use, click “Done.” When you click on the profile image once it has been posted, you can edit or remove it.
driving a BMW Verify that you are logged in with your BMW ID and that your driver profile is synchronized. Click on the image in the status bar to access the driver profile settings and activate it if it hasn’t already, then select “Synchronize driver profile.” Now, your BMW also displays your profile picture.
Please be aware that the personal profile image is only accessible for BMWs running the BMW Operating System 7 and software released on or after 7/19.