First, while the engine is running, push the odometer trip meter once to reset it to zero.
Then turn the ignition off once more. This step, in my opinion, was essential in order for me to access the Service menu.
You are now prepared to perform the following BMW E60 reset service light indicator instructions.
- Turn on the ignition. so that the parking brake, oil, and battery lights are visible. The car won’t start even though the key is set to start the engine.
- When a yellow triangle with an exclamation point appears in the top pane between the clocks, press the odometer reset button for 5 to 10 seconds. This is the icon for the service, which typically replaces the outside temperature, time, or date.
- When you temporarily release the odometer button and then immediately press it again, a picture of the brake fluid symbol appears. identical to the one displayed by the I Drive when you access the Service menu. The next service item will appear if you simply release the button and push it once again.
- If you wish to clear the BMW E60 oil service light. Once the phrase “RESET” appears at the bottom of the lower window, continue holding the odometer button.
- Push and hold the odometer button until the word “reset?” appears at the bottom of the lower window.
This is the whole process to reset the oil service light on a BMW E60. After an oil change, you can choose to reset any maintenance oil lights. Or, when maintenance is required for BMW cars, reset the check engine light, airbag light, inspection key, or insp faults. or any problem that pops up on the screen. Enter the name of the car you are looking for information about in the search box to learn how to reset other service reminders on your own.
You can find solutions to your automotive troubles on this informational website. If our processes are correct, please leave a remark. If you would want to add anything, please do so. We value all viewpoints.
In This Article...
jackrules
After performing regular maintenance on the vehicle, I’ll explain how to reset your service indicator on the iDrive.
I was changing my micro-filter, but you can use it for everything from brake pads to smog checks to oil changes. The odometer reset button located next to the speedometer is used for everything and the iDrive is NOT used at all.
1. Insert your key into the ignition and push the beginning button (without depressing the brake); all of your dashboard warning lights should illuminate. Check engine, P-Brake, etc.
2 Press the odometer reset button located close to the speedometer to reset the trip odometer to zero. (This action is crucial)
3. Remove the ignition key
4. Press the start button without putting your foot on the brake (repeat step 1) so that all the warning lights come back on.
5. Press and hold the odometer reset button for 5 to 10 seconds or until an exclamation point or an icon for another service appears. It will be visible between the tachometer and the speedometer. For me, the micro filter appears first. (The service section of your iDrive contains a glossary of service icons.)
6. Quickly release the odometer button and press it again to select a different service icon.
7. After selecting the desired icon, hold down the odometer reset button for an additional 5 to 10 seconds, at which point the mileage displayed beneath the icon should be reset.
Either wait 15 seconds without pressing anything or remove the key from the ignition if you ever want to prevent anything from being reset.
How can you turn a BMW’s inspection light back on?
Step 1 is to turn off the ignition. Step 2: Turn the key to position 1 and press and hold the trip odometer button. Step 3: Press and hold the button for about five seconds until the display reads “Oil Service” or “Inspection” with “Reset” or “Re,” and then release. Step 4: Press and hold the button for an additional five seconds.
How can the service light be turned off on a BMW?
- Start the electrical systems of the car, but do not start the engine.
- Till the service notice shows, press and hold the tiny odometer button in the instrument panel’s lower left corner.
- When the message says “Reset,” let go of the button and press and hold it once more.
How do I reset the service notification on my BMW?
Find the tiny odometer button in the instrument panel’s lower left corner. until the service message shows, press and hold. When the message says “Reset,” let go of the button and press and hold it once more.
After an oil change, how do you reset the check engine light on a BMW?
My uncle, a retired technician, recently changed the oil in my BMW. The maintenance light is still on, so I suppose he forgot to turn it off. How can I turn off the BMW’s oil-change light?
In less than two minutes, find out if your auto insurance is being overcharged.
- Don’t start the engine after turning the ignition on. You should hit the start button instead of depressing the brake pedal if your car has a push-to-start system.
- The service menu will show if you continue to depress the trip reset or odometer button on the instrument cluster. The reset button is normally located to the left of the speedometer, and pressing it for around 10 seconds should bring up the service menu.
- To discover the oil change notice, use the reset button to scroll through the settings. Press the reset button after that.
- Depending on the model, you might have to scroll through the options using the controls on the turn signal lever until you come across a prompt asking you if you’d like to reset the warning. Then, to reset the turn signal, press the BC button at the lever’s end.
- When prompted, press and hold the reset or BC button until the display indicates that the device is resetting.
You can save money on automobile expenses by having friends or relatives work on your vehicle, but employing Jerry can help you save money on extra expenses like auto insurance. The typical user of Jerry saves $887 annually on auto insurance.
Don’t be afraid to alter insurance or payment plans because you’re concerned about the extra labor. Jerry takes care of all the paperwork and even assists with canceling your previous insurance! Additionally, you can text one of our agents using the app if you have any questions along the route. They’ll be there for you whenever you need them.
On a BMW, how do you reset the red exclamation mark?
Start the engine, then move through the obc until you find the word RESET next to the “flat tyre” sign. To choose, press the stalk’s tip. A tick should display after about 5 seconds of pressing and holding; just drive away, and it will reset itself. Don’t wait for any confirmation because there are no other signs that it has done it.
All owners and aficionados of BMW’s 1 and 2 series have their own forum community. Join the conversation regarding performance, customizations, classifieds, troubleshooting, maintenance, and more!
What does “service due” mean on my BMW?
Service Vehicle: Your BMW needs service if this light is red. When it’s yellow, your BMW needs maintenance soon. It’s best to book a servicing appointment as soon as you can in either situation.