How To Reset BMW Battery Light?

BMW / By

Here are the instructions so that you can see how crucial the BMW computer reset is after reading the preceding explanation.

  • Once the lights and radio are turned on, first switch the ignition key of the BMW automobile to the accessory position. This must be completed prior to starting the car. Then, hold down the “Trip” button on the instrument panel for a few seconds until the red light appears.
  • Once more, press and hold the “Trip” button until Reset appears.
  • Press the same button a third time after that. The BMW computer will quickly reset now.

BMW automobile battery replacement and computer reset are both inexpensive procedures. The sooner you complete this, the easier it will be for you to operate your BMW vehicle. Despite all of these facts, this surgery should not be taken lightly. There are auto repair shops with qualified experts who adhere to the manufacturer’s warranty guidelines. To receive a safe and secure service, consult these businesses.

How Do I Reset My BMW Computer After Changing The Battery?

One of the vehicles with the most advanced intelligent operating system in the world is the BMV. Therefore, the first thing you must do after every hit or replacement of an object in the car is to restart the entire vehicle.

This setup enables the computer to anticipate your next replacement requirement and alert you to it. After changing the battery, resetting the BMW computer is a quick and easy process.

  • First, turn on the controller again.
  • Step 2: Press “Trip” to activate it and make it light.
  • Step 3: Hold down the “trip” button while continuing to press and hold it until the “Reset” button shows up on the screen.
  • Reset in Step 4

Summary of Contents

It’s crucial to realize that if your BMW has a red battery indicator or a charging system mistake on Drive, the car could abruptly stop while you’re traveling.

Pull over as soon as it’s safe to do so, turn off any unnecessary electrical devices, and unhook all chargers plugged into the USB and cigarette outlet if your BMW’s battery malfunctions. Turn off the heated chairs. Turn off the blower fan and the rear window defroster as needed.

It is crucial to keep in mind that the car won’t start again and needs to be towed to a mechanic or repair facility.

How to repair a BMW battery

If you haven’t already changed the battery in your BMW and don’t know how to do it, here is a quick method. There are nine steps that make up the battery replacement process:

  • Remove your key from the ignition after turning it off. Next, find your battery. In a BMW, where is the battery? The majority of the time, you can discover it within your trunk, either on the floor or on the right side. Located it? The battery liner should be removed.
  • With a 10mm wrench, unplug the negative battery terminal right away, then store the cable.
  • The cable must then be disconnected from the positive battery terminal. To complete the task correctly, lift up the red plastic cover and look for a 10mm nut; you must loosen it.
  • The time has come to remove the brackets. Two brackets, one on top and one on the side, support the battery. First, you should unbolt the latter using two 13mm bolts.
  • Take out the battery from the trunk, but be careful because it could be heavy.
  • Take images of the battery’s model number and technical specifications before you install the new battery. When registering your battery, the BimmerTech expert will need this information very much.
  • Now that the old battery has been removed, gently set the new one in its place. Just make sure the settings are correct.
  • crucial step Secure the battery properly. You must reinstall the brackets in order to accomplish this, being careful not to overtighten them. If not, you could break the battery housing. Connecting a Liquid Lead-Acid battery to the vent house can stop the vent house’s gasses from accumulating within your trunk if you’re installing one.
  • Finally, connect the battery terminals by connecting the positive battery terminal first, then the negative terminal, after cleaning the battery posts with a battery terminal brush.

NOTE: Purchase our Battery Registration service before you ever begin replacing or registering your battery, and choose a preferred date when you could replace and register the battery simultaneously. Make sure you can do everything in one day because battery registration is required following every battery change and needs to be done immediately after battery replacement.

Effective methods for resetting the BMW on-board computer

  • The ignition must first be turned on all the way so that the lights and radio are on. The auxiliary point is this.
  • The reset is performed before the car is started.
  • The “Trip” button on the instrument panel must then be pressed and held down.
  • Press and hold the button until the red light appears.
  • Once more holding down the “Trip” button while anticipating the Reset to display
  • When you press this button a third time, the BMW on-board computer will have been reset.

The majority of contemporary BMWs have quite intricate electrical systems. Keep in mind that the alternator is managed by a computer program, and the system is designed to be informed when a battery is changed. This implies that even if you switch to a different battery type, such as the AGM or the absorbent glass mat kind, the system still needs to be informed.

The procedure of updating the computer-controlled alternator is known as battery reset. If you don’t, the Diagnostic Trouble Codes (DTC) or Malfunction Indicator Lamp may activate. Refusing to do a battery reset may result in additional issues, such as a reduction in battery life, or in the worst case, damage to entire electrical components. The purpose of all these intricate systems is to increase the battery and vehicle lifespans.

A quick glance inside many BMW auto stores will reveal a wide range of problems caused by those who forget to reset their computers after changing the battery. This is due to the forceful battery charge caused by an unregistered battery, especially in cold temperatures. The control unit is further damaged as a result.

It’s reassuring to know that the entire process is reasonably affordable and quick if prices are a concern. You should soon be able to drive.

What does it signify if a BMW’s battery light illuminates?

When you start the car, if the car battery light illuminates, you’re good to go! When you turn on your car for the first time, this light should appear. A short while later, the light will go out.

But if the light remains on while you’re driving, be alert. Other symptoms of a low battery charge include power windows that are difficult to open or a stereo that won’t switch on.

Several problems, such as the following, could cause a battery light to illuminate:

  • a battery cable that is rusted or loose
  • an issue with the voltage regulator or alternator
  • damage to the battery’s plates or cells
  • The electric charging system in the car has faulty wiring.

Basically, a battery charging issue is indicated by a dashboard battery light. The automobile battery isn’t providing your car with enough voltage for it to run correctly. More “juice” is required!

How can I restart my automobile once the battery has been changed?

My car’s battery needs to be changed, but I’m not sure how to restart it after doing so. How can I restart my automobile once the battery has been changed?

In less than two minutes, find out if your auto insurance is being overcharged.

  • To allow the engine control systems to detect any potential issues, drive the automobile for at least 10 kilometers.
  • The check engine light will illuminate if there are any problems, and the electronic control module is probably to blame.
  • If it doesn’t turn on, everything is fine.

Check out Jerry app if you want to look at a good strategy to enhance your auto insurance policy now that the battery has been changed. We all can quickly provide you with individual quotations from leading insurers, leaving you with the decision of which plan best suits your needs. Once you choose one, we will all even assist you with switching!

What is a battery reset?

  • Utilize your phone up until the battery runs out.
  • reactivate your phone.
  • Continue doing this several more times.
  • Connect your phone to a charger without turning it on.
  • Turn your phone back on once you’re certain that the battery is fully charged.

Does my BMW require reprogramming after a battery change?

Let’s first focus on what BMW battery registration genuinely is before delving into the procedure. Battery registration, to put it simply, is the process of notifying your car that a brand-new battery has been installed. Importantly, it must be done every time you replace the battery in your BMW, model year 2002 or later.

The car adapts the amount of energy required to recharge to operate at peak levels as your battery ages and gradually loses its ability to charge. The battery needs more charging the older it is. By registering your battery, you can inform your engine control module (also referred to as DME — Digital Motor Electronics) that a new one has been installed. As a result, the vehicle will reset the old battery statistics and won’t attempt to overcharge the new battery under the assumption that the old one is still in place.

In addition to registering, you must also code your BMW computer. No matter how different or similar your new battery is from your previous one in terms of specifications, it will still be necessary each time you change it.

How can I restart my BMW laptop?

The mechanic will reset the computer in your BMW after the service is complete so it can record your mileage and let you know when the car will need maintenance again in the future. However, the techniques listed below can help you if you maintain your own car but are unclear of how to reset the computer system.

  • With the engine off, turn the key to the ON position.
  • For TEN seconds, press and HOLD the ODOMETER button. It can be found at the Instrument Cluster’s extreme bottom LEFT corner.
  • The dash screen will display FGSTNR along with a number. Your chassis number is this.
  • The LAST FOUR numerals are added. Ex: 3+4+5+6= 18 Your UNLOCK CODE is going to be 18.
  • Press and hold the ODOMETER button one more until the FGSTNR clearing area appears.
  • Press the odometer button until the upper Menu area (entering code menu) reaches 19 after the bottom area has cleared; When you do, the text will appear at the bottom: Press the odometer button to enter your unlock code after turning the lock on. This is seen in the bottom portion.
  • The screen will appear as in the image above after a little period, at which point the menu will once again appear at the top. To access the number 21 menu, press the odometer button.
  • On the screen’s bottom, it will say: RESET? To complete the reset, press the odometer button.

Your BMW’s computer has been restarted! The existing settings must now be added again, or new ones must be added.

**NOTE: Slowly repeat the procedures if you are unable to reset the BMW computer on your first attempt. If you’re still having trouble, ask the dealership for help or refer to your car’s owner’s manual.